Release Notes for MOBOTIX MOVE Camera Models
Mx-VT1A-2-IR, Mx-VT1A-5-IR, Mx-VT1A-203-IR, Mx-VT1A-503-IR Camera Software
Document
Information
|
Publisher:
|
MOBOTIX AG
|
|
Author:
|
Thomas
Dieregsweiler
|
|
Date:
|
2025-03-11
|
|
Document:
|
release-notes mb20250311TU en v1-1.html
|
|
Confidentiality:
|
public
|
Contents
These Release Notes
contain a technical description of the most important changes in the software
for the MOBOTIX MOVE Turret Mx-VT1A-xxx cameras.
Overview of the
Software Releases
Notes:
- Cameras do support fixed IP
setting and automized DHCP IP configuration. If there is no DHCP Server
available in Network environment, the camera automatically sets a unique
IP Address according to individual MAC Address rules without additional
configuration. This IP range is defined in 10.xxx.xxx.xxx Network range as
is printed on each individual Camera Product label.
- Please
download the stable customer releases of the software from www.mobotix.com in the Support >
Download Center > Software Downloads section.
- Please
send an email to support@mobotix.com
for feedback.
Important:
- For all the FW versions dated before
mb20241101TU please update first to bridge firmware mb20240710TU_bridge.dat
and then update to the latest on web FW version.
- These
MOBOTIX MOVE Turret cameras had been designed for general purpose and
broad integration in MOBOTIX and 3rd Party Software and
recording Solutions by using general purpose ONVIF S/G/T&M integration
and interoperability profiles. When integrating these cameras in
MOBOTIX Environments (i.e. MOVE NVR, MOVE CMS, MOBOTIX HUB /MxMC, MOBOTIX
Cloud…) or other 3rd party SW please use ONVIF device search
and Integration method only.
top
Software Release
mb20250311TU for MOBOTIX MOVE Camera Models Mx-VT1A-2-IR, Mx-VT1A-5-IR,
Mx-VT1A-203-IR, Mx-VT1A-503-IR
Creation Date: 2025-03-11
Publishing Date: 2025-03-11
Enhancements
and Improvements
- Increased Character numbers in
OSD Text single line.
- Improved the Analytics PVD
performance of 5M models
- Updated stream table of 2M
models
- Set RTSP Authentication to
Default: ON
Bugfixes
- Fix issue regarding network
recording to SD
- Reconnect websocket after
clicked download system log to avoid status not shown (Firmware update
status)
- Fixed login error with SFTP
- Fixed line counting reset issue
(Object Counting)
- Fixed unable to successfully
connect to the HTTPS port when change HTTP and HTTPS port setting at the
same time
- Fixed H.265 stream issue when
connected to NVR
top
Software Release
mb20241101TU for MOBOTIX MOVE Camera Models Mx-VT1A-2-IR, Mx-VT1A-5-IR,
Mx-VT1A-203-IR, Mx-VT1A-503-IR
Creation Date: 2024-11-01
Publishing Date: 2024-11-29
Enhancements
and Improvements
- Enhanced image quality
- Added a default/reboot combo
function to the default button: it will reset if pressed for 1 to 4
seconds; pressing for 5 seconds or more will set it to default
Bugfixes
- Fixed the event cannot send
mail to the correct user if one of the user’s email is empty
- Fixed VA line 3 arrow
disappearance issue.
- Fixed the motion detection
fails when the zone is drawn exactly on the edge or over the edge of live
view
- Fixed the latest recording file
cannot be obtained after rebooting issue during continuous recording
- Fixed the issue where changing
the encode settings may cause the snapshot function on the live view page
to fail
- Fix the HTTP Generic event
cannot be saved issue
top
Software Release
mb20240829TU for MOBOTIX MOVE Camera Models Mx-VT1A-2-IR, Mx-VT1A-5-IR,
Mx-VT1A-203-IR, Mx-VT1A-503-IR
Creation Date: 2024-08-29
Publishing Date: 2024-09-13
Enhancements
and Improvements
- Enhanced zoom/focus performance
- Enhanced PVD accuracy
- Adjusted the quality level
range settings for the ONVIF Test Tool (OTT)
- Added the display of the RTMP
page in the web UI and validated its functionality
- Renewed default password
mechanism when the device is restored to factory settings
Bugfixes
- Fixed SD card recording not
functioning
- Fixed the issue of image freeze
was caused by the video analytics
top
Software Release
mb20240510TU for MOBOTIX MOVE Camera Models Mx-VT1A-2-IR, Mx-VT1A-5-IR,
Mx-VT1A-203-IR, Mx-VT1A-503-IR
Creation Date: 2024-05-10
Publishing Date: 2024-06-01
Enhancements
and Improvements
- Added support for the
DNN-Anaylics Object-filter that can filter for People, Vehicles, or Both
- Added German GUI translation
corrections
- Enhanced the speed of Zoom,
Focus, and Auto-focus
- Implemented a mechanism that
ensures that the live view does not turn black while the lens Zoom / Focus
is moving
Bugfixes
- Fixed the timing issue with the
zoom control when the camera is connected via ONVIF
- Resolved the integration issue
that occurred after changing the codec to JPG in the Milestone Management
Client, which resulted in the live view does not display in the Smart
Client
- Fixed the issue of SD card
recording not functioning has been resolved, which was impacting both the
edge and the Milestone restore clips
top
Software Release
mb20240314TU for MOBOTIX MOVE Camera Models Mx-VT1A-2-IR, Mx-VT1A-5-IR,
Mx-VT1A-203-IR, Mx-VT1A-503-IR
Creation Date: 2024-03-14
Publishing Date: 2024-03-15
Enhancements
and Improvements
- Optimized zoom in/out
functionalities in MOBOTIX MOVE NVR
- Modified the default codec
setting of stream 2 from MJPEG to H.264
- Implemented dynamical
generation of tab title by product name
- Added full-screen on live page
- Improved Zoom/Focus move speed
- Refined encode start/restart
process to speed up WDR switch
- Added support for GNU/GPL
License pop-window
- Implemented mechanism on the
web page so that the live stream will automatically use H.264 as the
default codec and adjust the resolution to the highest resolution
- Added support for classifying
objects as Human or Vehicle
- Implemented GUI translation
(DE) corrections
Bugfixes
- Fixed when user disables
"Accept IPv6 router advertisements" and "Enable
DHCPv6", dhcpv6 still connected from the web page
- Fixed the callback of HTTPS
specify port error
- Fixed user can't set the
original multicast address bug issue
- Fixed wrong event type name on
events page
- Fixed height of event list bug
on events page
- Fixed multicast audio address
bug
- Fixed h264 websocket can't req
i-frame bug when switching tab
- Fixed freeze issue by adding a
mechanism of reconnecting h264 websocket to avoid freeze
- Fixed issue that when user
synchronize with NTP Server from DHCP server, synchronize time may fail
- Fixed the continuous movement
of zoom/focus is not functioning as expected
- Fixed the issue where the 5MP
camera would not trigger when the detection type was set to PVD
- Fixed the issue that switching
between detection modes in PVD and MD multiple times can cause PVD to stop
functioning
Copyright
© 1999 – 2025, MOBOTIX AG, Germany, support@mobotix.com