==================================
MOBOTIX MOVE FIRMWARE UPDATE NOTES
==================================


* General Information

 Date:           2024-11-29
 Release:        mb20241114NX

 For Hardware:   MOBOTIX MOVE Cameras Mx-MD1A-5-IR

 Manufacturer:   MOBOTIX AG
                 Kaiserstrasse
                 67722 Langmeil
                 GERMANY
                 http://www.mobotix.com/


* General Notes

This is an improved customer version for the MOBOTIX MOVE camera Mx-MD1A-5-IR.

This update will NOT work on other cameras.

News about this firmware can be found under this address:

   http://www.mobotix.com/


* To Update the Camera Firmware

 1. Download the file mb20241114NX.dmg to your computer.

 2. Make sure that the file has been transferred completely.

 3. Start the camera.

 4. Log onto the camera as administrator, open "System > Software Upgrade".
    Select the file mb20241114NX.dmg and start the upload.

    CAUTION:

     - Never interrupt the procedure while the camera is uploading or rewriting
       its flash memory.

     - The upload procedure may take several minutes.

     - During the procedure, the browser windows may not be updated properly.

 5. Upon completion of the upload, the browser window will reload.

 6. The settings of the camera will remain intact during and after the update.
    It is recommended, however, to reset certain parts of the configuration to
    the factory defaults, while keeping the other parts of the current
    configuration. If conflicts are detected while opening camera pages, warning
    messages will inform you about these conflicts.

    When resetting the configuration to factory defaults, the network
    and user settings should not be reset to factory defaults.