Document Information

Publisher:	MOBOTIX AG
Author:	Thomas Dieregsweiler
Date:	2024-11-29
Document:	release-notes_mb20241118NVR64_en_v1-1.html
Confidentiality:	public

Contents

These Release Notes contain a technical description of the most important changes in the software for the MOBOTIX MOVE NVR 64 channel device.

Overview of Software Releases

Release Version	Creation Date	Publishing Date
mb20241118NVR64	2024-11-18	2024-11-29
mb20240624NVR64	2024-06-24	2024-08-14
mb20240429NVR64	2024-04-29	2024-06-01
mb20240301NVR64	2024-03-01	2024-03-15
mb20231013NVR64	2023-10-13	2023-10-23
mb20230301NVR64	2023-03-01	2023-03-23
mb20221101NVR64	2022-11-01	2022-11-01
mb20220822NVR64	2022-08-22	2022-08-31
mb20220511NVR64	2022-05-11	2022-05-20
mb20220127NVR64	2022-01-27	2022-02-25

Notes:

• Please download the stable customer releases of the software from www.mobotix.com in the Support > Download Center > Software Downloads section.
• After downloading the software, please extract both files to the same folder. The device needs both files at the same location in order to verify the software before starting the installation.
• Please send an email to support@mobotix.com for feedback.

top

Software Release mb20241118NVR64 for MOBOTIX MOVE Mx-S-NVR1A-64-POE24

Creation Date: 2024-11-18

Publishing Date: 2024-11-29

New Features

·       Added new feature to change the hostname of the NVR

Improvements

• None

Bugfixes

• None

Hints

• Compatible camera FW: Minimum camera FW version to support config upgrade: mb20220712UX

 

top

Software Release mb20240624NVR64 for MOBOTIX MOVE Mx-S-NVR1A-64-POE24

Creation Date: 2024-06-24

Publishing Date: 2024-08-14

New Features

·       None

Improvements

• Sync camera connection password settings automatically after the user modifies the password
• Adjusted device search “Add Device” conditions to filter for ''MOBOTIX MOVE''
• Support for the Polish language
• In the "add device" page, change the text "Mobotix move" to "Mobotix" in the device filter

Bugfixes

• Changed motion/mask settings to correspond with multi-sensor camera streaming
• Fixed the bug where text is incorrectly translated into Japanese in Japanese language
• Fixed the Live page camera setup bug for third-party Onvif cameras(local only)
• Fixed the bug that prevents detection of two USB devices simultaneously
• Fixed the Mobotix USB keyboard (with ptz joystick & jog shuttle) detection problem(local only)

Hints

• Compatible camera FW: Minimum camera FW version to support config upgrade: mb20220712UX

 

 

 

top

Software Release mb20240429NVR64 for MOBOTIX MOVE Mx-S-NVR1A-64-POE24

Creation Date: 2024-04-29

Publishing Date: 2024-06-01

New Features

·       None

Improvements

• Implemented a mechanism to sync camera connection password settings automatically after the user modifies the password
• Adjusted device search “Add Device” conditions to filter for ''MOBOTIX MOVE''
• Applied ''Device'' authority settings for the ''Web Page'' option

Bugfixes

• Changed motion/mask settings to correspond with multi-sensor camera streaming

Hints

• Compatible camera FW: Minimum camera FW version to support config upgrade: mb20220712UX

 

 

 

top

Software Release mb20240301NVR64 for MOBOTIX MOVE Mx-S-NVR1A-64-POE24

Creation Date: 2024-03-01

Publishing Date: 2024-03-15

New Features

·       Instant playback which allows user to select single channel playback at live page

Improvements

• Optimize features for multi-sensor models: present all screens captured by the machine in groups & automatically capture sub streams.
• Modify the web page refresh rendering service.
• Enable the WebViewer for camera.

Bugfixes

• Fix the popup window bug.
• Fixed the rtsp_server bug.
• Fixed Axis encoder connect issue.
• Fixed Axis camera connect Onvif issue.
• Fixed https setting bug after import config file.

Hints

• Compatible camera FW: Minimum camera FW version to support config upgrade: mb20220712UX

 

 

 

top

 

Software Release mb20231013NVR64 for MOBOTIX MOVE Mx-S-NVR1A-64-POE24

Creation Date: 2023-10-13

Publishing Date: 2023-10-23

New Features

• Added Pop Up messages while leaving the add device page in case the camera is not connected correct yet.
• Added forget password function (requires latest MOVE NVR APP update)
• Added user password setup hint and “modify Password” for connected cameras via NVR remote Browser

Improvements

• Modified description text for WAN port DHCP server
• Added hint text when credential is wrong
• Support MOVE Multi-sensor camera connection
• Modified the GUI wording in add device
• Implemented support for the Axis Encoder
• Implemented modification for the Export Schedule

Bugfixes

• Fixed time zone crash issue in combination with CMS Software

Hints

• Compatible camera FW: Minimum camera FW version to support config upgrade: mb20220712UX

 

 

 

top

 

Software Release mb20230301NVR64 for MOBOTIX MOVE Mx-S-NVR1A-64-POE24

Creation Date: 2023-03-01

Publishing Date: 2023-03-23

New Features

• Add the ONVIF camera time sync service
• Add camera time sync setup service

Improvements

• Mobotix PTZ keyboard integration
• HTTP Event Notify Server Refine
• Update the notification/Warning Image icon
• Modified VA data path for Windows Edition
• Modified GUI IR Gain Option Layout
• Enabled HTTPS port change service
• Support of the PTZ keyboard controller left/right hand mode

Bugfixes

• Fixed PTZ control in left hand side
• Fixed multiple NAS device at system bug
• Fixed some text translation error
• Fixed the bug about the event zone drawing service
• Fixed the event snapshot problem in Notify Center

top

Software Release mb20221101NVR64 for MOBOTIX MOVE Mx-S-NVR1A-64-POE24

Creation Date: 2022-11-01

Publishing Date: 2022-11-04

New Features

·        MXVMS_143: Fix Onvif Camera Decode Problem (Pelco Camera)

Pelco camera that we test - public IP http://161.230.88.52

The user: admin and the pass: dsg554321 -The camera is one Sarix pro 3 ref. IBP231-1ER

·        Add event push message service (NVR/Remote)

VA event is now supported now, and there’s a switch to decide if you want to send the event or not

·        MXVMS_126: Add white/black list service for Face Recognition & LPR

DC camera can support white/black list in FR & LPR

·        Add bypass camera Face Recognition & LPR Service

Bypass mode can support DC camera now

·        Modify the event log search service

In log pages, you can choose the filter to search the event

·        MXVMS_138: Support Onvif PTZ Service

The FW with PTZ function can pass OTT support.

·        Support Face Recognition/LPRDatabase Edit service (NVR/Remote)

User now can do the edit to the database for Face Recognition and LPR

·        Disable google drive service (Google policy)

·        MXVMS_100: Videotec keyboard integration

o   Please connect Keyboard with NVR, then reboot to detect new device.

o   Once the keyboard is detected, you will see keyboard model name Videotec DCZ 1 shown on the Joysticks page. The whole page will become grayed out

·        MXVMS_104: Support Video analytics setting from remote

·        MXVMS_107: Support edge recording from remote

·        MXVMS_126: Setup> System> Event management, for video analytics, support In list/ white list/ black list/ Not in list

o   The definition of bypass/ Normal could refer to our proposal about vaxtor in

o   From thisversion, video analytics action will depend on the list. Whenever there is subject enter zones, action will be triggered depending on the action defined by list. Let’s say Vera is in the blacklist. As long as Vera enters any of the zones, then she will trigger action linked to the blacklist. Same list setting is applied for all of the cameras.

·        MXVMS_132: Vaxtor integration

o   No need to configure camera setting from NVR side

-        On Liveview page, no additional options for configuring LPR setting

o   NVR could receive Vaxtor events

-        There will be notification in the message center

o   NVR could configure corresponding actions for Vaxtor events

-        User could configure the corresponding event when LPR event is triggered

-        Specially note that now the user could decide the action based on the list:

ü  Normal: It means NVR will judge whether there is event or not by cross checkingthe detected license plate with the list inside NVR

ü  Bypass: It means camera will judge whether there is event or not by cross checking the detected license plate with the list inside camera

-        Specially note that there are 4 types of list:

ü  White list

ü  Black list

ü  In list: whatever inside the database

ü  Not In list: whatever not inside the database

-        To receive Vaxtor event, user need to configure the listen port in NVR. There is a new tap under Setup> Network> Event receiver. User could decide whether they want to enable https / authorization feature

-        Camera will need to include new message template to send correct info to NVR. DC will provide info for camera FW revision

o   Users could receive below info from camera

-        Information will be displayed under Log> VA detected event> Info

-        Now all the info will be put into one column.

o   User could export information by using below filter condition:

-        Duration

-        Number plate

-        CH number

o   The exported file format is CSV

·        MXVMS_141: FW version on the OTT test report will be in the same format as Mobotix style mb+date code+NVR model. EX: mb20221019NVR816

Improvements

•  

Bugfixes

•  

 

 

 

 

top

Software Release mb20220822NVR64 for MOBOTIX MOVE Mx-S-NVR1A-64-POE24

Creation Date: 2022-08-22

Publishing Date: 2022-08-31

New Features

• Read Warning when using Motion Detection on NVR -
  Event reminder will be applied on all the channels, for all the event types - When there is an event happens since the last time users acknowledges event, there will be a reminder icon on the top right of the channel. - If users hover over the icon, there will be text displaying the latest event type and event time. If user wants to check more events that have ever happened, he should go to Playback/ Export or Log page to check further information of that channel. - If users click on the icon, it is equivalent to acknowledge all the events on that channel. The icon would disappear after the click. -The behavior for local NVR and remote won't be synchronized. For example, there is a new user logged in from web remote, the event reminder would only count the event since his login. User from local won't be affected by other remote users.
• Move Camera Config upload from remote/ local,
  users could decide whether they would like to apply network setting or not. Be sure to insert a USB flash first.
  - Note1 : This feature requires camera FW (mb20220815 or later) to support.
  - Note2: Camera original FW version, model must be exactly the same to apply the config file
  - Note3: Network setting doesn’t include IP address, but other options like webserver port, RTSP port, etc.
• MOVE Camera Certification file upload from remote/ local
  Note: This feature requires camera FW (mb20220815 or later) to support.
• On FW version page, should display the zip file name so the FW version match the release note
• Option to send a snapshot via E-mail
  Note: Ensure that under Setup>System >Event management, snapshot is selected
• Sending emails only outside of business times now supported
• Support open VPN (Local NVR only)
  Note: Ensure that either LAN/ WAN port needs to be able to reach the VPN server
• Under Add Device, the IP cam and ONVIF represents the username / password that will be applied based on the filter. IP Cam changed to MOBOTIX MOVE
• Support web.de mail

Improvements

• Setup > storage> local storage, "inactivate" changed to "deactivate"

Bugfixes

• Move NVR8/16 does not operate sufficient with MOBOTIX IoT P7 camera range, bad frame rate and visual artifacts fixed
• Time gap issue fixed: Live view showed a time difference between the NVR and Camera as 10 seconds but there was a 7 minute difference in the playback time display

top

Software Release mb20220511NVR64 for MOBOTIX MOVE Mx-S-NVR1A-64-POE24

Creation Date: 2022-05-11

Publishing Date: 2022-05-20

New Features

• Support Mobotix digital signature.
• Updated Kernel data code.
• PASS ONVIF S/T/G Device (server) test.
• Make failover/ primary NVR system could be inter-upgradable.
• This feature is completed by putting chg_logo.chk also in the .zip file.
• Support password change from remote.
• Upgrade camera FW from remote.
• Could add Wisenet camera into Move NVR.
• Under Setup> Network> Ethernet, there is new feature "Route" to arrange routing table priority.
• Note: The port needs to connect to DHCP server to see the it is shown on the list.
• Under Record > Record Schedule, there are two recording templates.
• Record
• No Record
• Note: This is new feature for passing ONVIF test tool
• Display “About” on remote web.

 

Improvements

·        -

Bugfixes

·        Support FW upgrade naming rule:[ “mb” + release date +” NVR “+ number of channels .zip ] for 64CH NVR.

·        After FW upgrade, the FW version won't be upgraded after refresh. Need to reboot NVR to refresh FW version.

·        Couldn’t set RTSL URL under MAC + Chrome.

·        Remove "Stream Motion Setting" under LBR.

o   Note: "Stream Motion Setting” is no longer existing, but UI hasn’t removed it.

·        Could do back-end dewarp on playback for fisheye camera .

·        See two login window under MAC + Firefox.

 

 

top

Software Release mb20220127NVR64 for MOBOTIX MOVE Mx-S-NVR1A-64-POE24

Creation Date: 2022-01-27

Publishing Date: 2022-02-25

New Features

• MOBOTIX IoT camera bidirectional audio supported (P6/P7)

·        Central IP camera Password change for a batch of cameras via local NVR

·        Support adding IP camera device by Pull live stream from IP-Camera RTSP URL

·        Backend NVR De-warping for MOVE Hemispheric Camera in Playback mode
Note: Feature limited to 64Ch NVR only (not available on 8/16 Ch NVR)

·        Change password length to be 8-16.
The supported characters are A-Z, a-z, 0-9, !#$%&'-.@^_~

Improvements

·        UI improvement - when parameter is saved, there will be "Save succeeded" text shown on the bottom to indicate changed parameters saved.

·        UI improvement - under "Add device", user has to unlock the camera lock symbol first to do any parameter change. After the parameters are changed and camera locked, there will be pop up window "Save succeeded"

·        UI Improvement - under guest mode, users don't need to logout first to login as admin

·        In “About-Window” additional SW Info available: Display of FW version, release date, 3rd Party SW-licenses (GPL, GNU…)

Bugfixes

·        UI adjustment - Under live view, adjust character length to avoid text being blocked when using German

·        UI adjustment – Setup > Display > Video display mode shall show English
Setup > PoE / Ip-Port Management >Advanced “Save” corrected to English

 

Copyright © 1999 – 2022, MOBOTIX AG, Germany, support@mobotix.com