Release Notes for
MOBOTIX MOVE Camera Models Mx-VT1A-2-IR, Mx-VT1A-5-IR, Mx-VT1A-203-IR,
Mx-VT1A-503-IR Camera Software
Document Information
|
Publisher:
|
MOBOTIX AG
|
|
Author:
|
Thomas
Dieregsweiler
|
|
Date:
|
2024-11-29
|
|
Document:
|
release-notes
mb20241101TU en v1-1.html
|
|
Confidentiality:
|
public
|
Contents
These Release Notes contain a technical description of the most
important changes in the software for the MOBOTIX MOVE network cameras.
Overview of the Software
Releases
Notes:
- Cameras
do support fixed IP setting and automized DHCP IP configuration. If there
is no DHCP Server available in Network environment, the camera
automatically sets a unique IP Address according to individual MAC Address
rules without additional configuration. This IP range is defined in
10.xxx.xxx.xxx Network range as is printed on each individual Camera
Product label.
- Please download the stable customer releases of the
software from www.mobotix.com in the Support >
Download Center > Software Downloads section.
- Please send an email to support@mobotix.com for feedback.
Important:
- These MOBOTIX MOVE cameras had been designed for
general purpose and broad integration in MOBOTIX and 3rd Party
Software and recording Solutions by using general purpose ONVIF
S/G/T&M integration and interoperability profiles. When integrating
these cameras in MOBOTIX Environments (i.e. MOVE NVR, MOVE CMS, MOBOTIX
HUB /MxMC, MOBOTIX Cloud…) or other 3rd party SW please use
ONVIF device search and Integration method only.
top
Software Release mb20241101TU for MOBOTIX
MOVE Camera Models Mx-VT1A-2-IR, Mx-VT1A-5-IR, Mx-VT1A-203-IR, Mx-VT1A-503-IR
Creation Date: 2024-11-01
Publishing Date: 2024-11-29
Enhancements and Improvements
- Enhanced
image quality
- Added
a default/reboot combo function to the default button: it will reset if
pressed for 1 to 4 seconds; pressing for 5 seconds or more will set it to
default
Bugfixes
- Fixed
the event cannot send mail to the correct user if one of the user’s email
is empty
- Fixed
VA line 3 arrow disappearance issue.
- Fixed
the motion detection fails when the zone is drawn exactly on the edge or
over the edge of live view
- Fixed
the latest recording file cannot be obtained after rebooting issue during
continuous recording
- Fixed
the issue where changing the encode settings may cause the snapshot
function on the live view page to fail
- Fix
the HTTP Generic event cannot be saved issue
top
Software Release mb20240829TU for MOBOTIX
MOVE Camera Models Mx-VT1A-2-IR, Mx-VT1A-5-IR, Mx-VT1A-203-IR, Mx-VT1A-503-IR
Creation Date: 2024-08-29
Publishing Date: 2024-09-13
Enhancements and Improvements
- Enhanced
zoom/focus performance
- Enhanced
PVD accuracy
- Adjusted
the quality level range settings for the ONVIF Test Tool (OTT)
- Added
the display of the RTMP page in the web UI and validated its functionality
- Renewed
default password mechanism when the device is restored to factory settings
Bugfixes
- Fixed
SD card recording not functioning
- Fixed
the issue of image freeze was caused by the video analytics
top
Software Release mb20240510TU for MOBOTIX
MOVE Camera Models Mx-VT1A-2-IR, Mx-VT1A-5-IR, Mx-VT1A-203-IR, Mx-VT1A-503-IR
Creation Date: 2024-05-10
Publishing Date: 2024-06-01
Enhancements and Improvements
- Added
support for the DNN-Anaylics Object-filter that can filter for People,
Vehicles, or Both
- Added
German GUI translation corrections
- Enhanced
the speed of Zoom, Focus, and Auto-focus
- Implemented
a mechanism that ensures that the live view does not turn black while the
lens Zoom / Focus is moving
Bugfixes
- Fixed
the timing issue with the zoom control when the camera is connected via
ONVIF
- Resolved
the integration issue that occurred after changing the codec to JPG in the
Milestone Management Client, which resulted in the live view does not
display in the Smart Client
- Fixed
the issue of SD card recording not functioning has been resolved, which
was impacting both the edge and the Milestone restore clips
top
Creation Date: 2024-03-14
Publishing Date: 2024-03-15
Enhancements and Improvements
- Optimized
zoom in/out functionalities in MOBOTIX MOVE NVR
- Modified
the default codec setting of stream 2 from MJPEG to H.264
- Implemented
dynamical generation of tab title by product name
- Added
full-screen on live page
- Improved
Zoom/Focus move speed
- Refined
encode start/restart process to speed up WDR switch
- Added
support for GNU/GPL License pop-window
- Implemented
mechanism on the web page so that the live stream will automatically use
H.264 as the default codec and adjust the resolution to the highest
resolution
- Added
support for classifying objects as Human or Vehicle
- Implemented
GUI translation (DE) corrections
Bugfixes
- Fixed
when user disables "Accept IPv6 router advertisements" and
"Enable DHCPv6", dhcpv6 still connected from the web page
- Fixed
the callback of HTTPS specify port error
- Fixed
user can't set the original multicast address bug issue
- Fixed
wrong event type name on events page
- Fixed
height of event list bug on events page
- Fixed
multicast audio address bug
- Fixed
h264 websocket can't req i-frame bug when switching tab
- Fixed
freeze issue by adding a mechanism of reconnecting h264 websocket to avoid
freeze
- Fixed
issue that when user synchronize with NTP Server from DHCP server,
synchronize time may fail
- Fixed
the continuous movement of zoom/focus is not functioning as expected
- Fixed
the issue where the 5MP camera would not trigger when the detection type
was set to PVD
- Fixed
the issue that switching between detection modes in PVD and MD multiple
times can cause PVD to stop functioning
Copyright © 1999 – 2021, MOBOTIX AG,
Germany,
support@mobotix.com