Integration of IoT camera via proxy server

Important Information

Other Improvements

Computer Sound System Selection (Sound API)

Playing audio from the live stream or recordings from cameras can cause frame stops and other issues on certain systems in rare cases. In these cases, there are incompatibilities between the existing audio system of the MxMC computer and the audio libraries used in the program. To work around the problem, the appropriate audio system can be selected in the Audio section of the File > Preferences dialog under the new Sound API option. Tests carried out show that SDL is often the best choice to resolve the problem.

Improvements in camera configuration

• Comments (image overlays) of a Full Image recording
  The Comment input field in the Recording Mode area of the View > Configuration > Recording dialog for entering image overlays in Full Image mode has been enlarged and now allows the convenient input of even long texts and variables.
• Auto Sharpness and Color Saturation Settings
  In the Image section of the View > Configuration > Video dialog, there are two new parameters: Automatic Sharpness Control and Automatic Saturation Control to enable automatic sharpness and color saturation.
• Definition of Time Tables
  When defining time tables in the Time Tables section of the View > Configuration > Time dialog, individual time ranges can now be defined down to the minute. Until now, minutes have been "rounded" to a quarter of an hour.

Bugfixes

• Hemispherical Camera Views in the Grid
  When displaying hemispherical camera images (full images) in a grid, the camera views defined per grid tile (panorama, surround,...) were sometimes not saved correctly and then not applied correctly for the display the next time the grid was opened.
• Load Project Files
  When loading a previously saved project file using the File > Open project... menu item it could cause the application to crash.
• Export of Recordings from Multiple Cameras
  When exporting the recordings from multiple cameras at the same time, if one of the cameras in the time range selected for export had no recordings, it caused the application to crash.
• SSL Certificates
  It was not possible to upload existing SSL certificates to cameras and the creation of an SSL certificate failed if the specified key name contained an "Umlaut" ('ä', 'ü', 'ö').
• Grid Playback
  When playing back recordings from multiple cameras at the same time in the Grid Playback view, it could happen that the recording from the same camera was played back in all grid tiles.

Fixes in the area of camera configuration

• Thermal Radiometry Events
  In the View > Configuration > Events > Environmental Events dialog, when defining the measurement or reference window for thermal radiometry events, the window definitions made were not correctly transferred to the camera.
• Definition of Motion Detection Window
  When defining windows in the Video Motion section of the View > Configuration> Events > Image Analysis Events dialog, the dialog for entering the detail parameters for VM windows was sometimes not displayed correctly and could not be operated correctly in this case.

Known Limitations

• The online help is only in English language on the function level of version 2.8. In all other languages, the functional status of version 2.7 is still described.
• Otherwise, the same restrictions apply as since version 2.1.1 of MxManagementCenter.

top

Release 2.7.2 of MxManagementCenter

Created on: 2023-05-16

Published on: 2023-05-16

Bugfixes

• Subsequent correction of hemispherical images
  In the case of hemispheric cameras that display live and record a full image, the subsequent correction of these images in the MxMC was defective. Depending on the set camera mounting type, the image modes Normal, Panorama, etc. were not displayed correctly and the PTZ actions for them were not executed correctly. This applied both to the subsequent correction of the camera live image and to the subsequent correction of the recorded full images.
• Display errors at certain image resolutions
  At certain image resolutions (e.g. nHD, SVGA, Full-HD) the camera image was not displayed quite correctly - there were errors at the bottom of the image in the area of the displayed camera status line.
• Bit rate for integrated MOVE/ONVIF cameras
  After integrating MOVE cameras via the ONVIF interface, changing  the video codec or other properties in the MxProfil caused the bit rate to be automatically set to the maximum value for the camera and this profile. This is no longer done and the previously set bit rate remains unchanged.
• Project file '*.interchange' and camera groups
  After loading an MxMC project file '*.interchange' that had previously been created with MxMC version 2.7, no groups were displayed in MxMC and no new groups could be defined.

Known Limitations

• The online help is only in English language on the function level of version 2.7.1. In all other languages, the functional status of version 2. 6 is still described.
• Otherwise, the same restrictions apply as since version 2.1.1 of MxManagementCenter.

top

Release 2.7.1 of MxManagementCenter

Created on: 2023-04-14

Published on: 2023-04-14

Enhancements and Improvements

For more information about the new features described below, see the program's online help

New feature to format SD cards in IoT cameras

In the toolbar of the Cameras tab of the Components view , there is a new function icon Format SD cards. The function allows a convenient reformatting of the SD cards integrated in the previously selected IoT cameras. After selecting one or more IoT cameras of the Mx4/5, Mx6 and Mx7 product lines in the camera list, this function becomes active and allows you to select one of the following options for reformatting the SD cards.

• Quick Format:
  This will reformat the SD card without partitions for MxAnalytics and Mx7 App data and without completely overwriting the existing data. After that, neither MxAnalytics nor Apps can still be used on these cameras!
• Secure Format (Slow):
  This will reformat the SD card without partitions for MxAnalytics and Mx7 App data. The existing data is completely overwritten. After that, neither MxAnalytics nor Apps can still be used on these cameras!
• Quick Format with Analytics/App volume
• For cameras of the Mx4/5 and Mx6 series, a partition of 1 GB is created for MxAnalytics data in addition to the standard partitions. The existing data is not completely overwritten.
• For cameras of the Mx7 series, in addition to the standard partitions, a partition in the size of 2 GB is created for Mx7 app data.

Improvements in Smart Data Sources

In the area of Smart Data Sources, the following improvements have been implemented:

• Function Get smart data information of active camera apps
  After selecting this function in  the Cameras  tab of the Components view, the number of Mx7 camera Apps found via it is now displayed. In addition, the Smart Data Sources found in this way are displayed in bold in the list of all Smart Data Sources.
• Smart Data bar settings:
  In this area of the Smart Data Sources tab of the Components view, several previously selected cameras or camera groups can now be inserted into the Cameras field using drag & drop.

Other improvements

• Configuration of SNMP traps
  In the Monitoring section of the View > Configuration > Recording dialog, there are now options for setting SNMP traps for Mx7 cameras.
• Entering a reason for logging in MxMC
  Users with a defined password can now also enter a reason for logging in when logging in to MxMC. This reason is also displayed in the MxMC action log.
• Refresh preview image
  In the View > Components > Cameras dialog the Refresh preview image function is now also applied to several previously selected cameras, thereby updating their preview image.
• Configuration of Softbuttons
  In the Softbuttons tab of the View > Components dialog,  the Softbuttons can now be sorted by name. In addition, several soft buttons can be selected and deleted at the same time.

Bugfixes

• Audio playback in continuous recordings
  When playing back recordings with audio, sound dropouts could occur in between, especially in continuous recordings. These dropouts occurred during Playback and Grid Playback views, but not in the exported files of these recordings. In addition, the effect only occurred when accessing the file server or a MxFFS medium directly and not when playing back from the camera.
• Playback date and time with monitor scaling 150% and Japanese Windows
  Setting a display scaling of 150% in a Japanese Windows settings caused the control for displaying and entering recording date and time not to appear in the Playback view at some image resolutions.
• Data export with subsequent PTZ
  Applying PTZ actions when exporting data in the Playback view could cause the exported images to have a blue color cast.
• Data export abortion
  Under certain circumstances, the export of camera recordings was cancelled before the specified time range was fully exported. This was especially true for recordings with minor errors, such as those that can occur after a camera restart after an unforeseen power interruption.
• Connection and display errors in grid view
  During the live display of many cameras in a grid, it could happen that different, changing cameras showed connection errors and no live image anymore. This occurred in particular when "public access" was still activated on the cameras.
• Program start in Windows domain with umlauts in the user name
  The program could not be started by users in a Windows domain if the users had an umlaut ("ä", "ü",..) in their Windows user name.
• Program start when OpenGL is missing
  When starting the program on Windows systems without OpenGL 2.1 support, only a white window was displayed.
• Increasing memory consumption when OpenGL is activated
  The activation of the OpenGL option in the General area of the File > Settings menu could lead to a rapid increase in the memory consumption of the program on Windows systems and the application could no longer be used at some point.
• Project verification function
  The function Verify... in the Project and Network Environments dialog for project verification was not functional and has now been removed.
• Snapshot images
  The images created using the  Live View Snapshot function icon were too small and did not correspond to the camera live image.

Known Limitations

• The online help is only in English language on the function level of version 2.7.1. In all other languages, the functional status of version 2. 6 is still described.
• Otherwise, the same restrictions apply as since version 2.1.1 of MxManagementCenter.

top

Release 2.7 of MxManagementCenter

Created on: 2022-12-16

Published on: 2022-12-16

Enhancements and Improvements

For more information about the new features described below, see the program's online help

Camera management in the Components view

In the Components view, there is a new Cameras tab. After selecting this tab, a list of all cameras that are integrated into the MxManagementCenter appears. This list contains important information about the cameras, such as the camera name, the IP address and the installed firmware version. The Cameras view offers many functions for managing the cameras:

• The toolbar at the bottom of the window displays all function icons that were previously only available in the Wizards and Tools view. The associated functions, such as a firmware update, can be applied to any number of cameras that have previously been selected in the list. A multiple selection is possible using the key combinations "Shift + mouse click"  or "Ctrl + mouse click".
• In addition, all options for setting the camera properties that were previously only contained in the Camera Configuration dialog are offered in this view on the right side. When selecting several cameras at the same time, the amount of adjustable options is automatically limited to those that can be meaningfully changed for several cameras at the same time.
• Below the areas for changing the camera properties, there is also the Camera Discovery area. There, cameras can be searched for, transferred to the camera list via drag & drop and thus automatically integrated into MxManagementCenter.

Smart Data Sources - Additional MOBOTIX 7 Apps and Simplified Configuration

The support for apps of MOBOTIX 7 cameras within the Smart Data Search introduced in version 2.4 has been extended by additional Apps. Overall, the result data of the following Apps is now available using the Smart Data Sources:

The Smart Data Sources to be used for a Smart Data Search no longer need to be manually added to the Components view in the Smart Data Sources pane, but can be generated automatically. For this purpose, there is a new function button Get Camera Apps in the new Components > Cameras view. This button is automatically activated as soon as an Mx7 camera is selected in the list on which at least one App is activated. By pressing this function button, Smart Data Sources for the activated Apps of the camera that are supported by MxMC are automatically generated and entered into the list of Smart Data Sources, as long as they are not already included there.

Smart Data Search with Advanced n Search Filtersn

In the Smart Data search, a Daily Time Period can always be defined as an additional filter criterion parallel to the filter-specific criteria (such as the camera). This allows searches in a previously defined larger period of time (e.g. Last week) to be restricted to a more accurate daily period.

Grid display with improved performance

In the new version 2.7 of MxMC, image generation has been optimized. On the one hand, the computing load is now distributed more evenly among the different CPU cores and on the other hand, more graphics operations are now performed using OpenGL by the graphics card instead of the CPU. On systems with many CPU cores and a powerful graphics card, for example, it can be achieved that significantly more camera live images can be displayed in a grid than before. Here, increases of up to 40% are possible.

IPv6 support

Cameras can now also be integrated into MxMC with IPv6 addresses. To do this, their address must be entered in the following format: "[<IPv6 address without port number>]" or "[<IPv6 address without port number>]:<port number>".

Example: [2001:0db8:85a3:08d3:1319:8a2e:0370:7344]:8080

Other improvements

• Hourly archiving of the action log
  In the Monitoring area of the File > Settings dialog, an hourly archiving of the action log can now be set.
• Online Help Enhancements
  A list of all logged actions has been added to the action log area.
• Program installation on Windows using a .msi file
  For automated installation of the program in Windows systems, an installation file of type '.msi' is now available. 

Bugfixes

• Playback of recorded dual images
  When playing back recorded dual images, the selection of the desired image sensor was incorrect. Also, sometimes each other's event images were displayed instead of the currently selected sensor.
• Playback date and time with monitor scaling 150%
  The setting of a display scale of 150% in the Windows settings led to the fact that the control for displaying and entering recording date and time was not displayed in the Playback view at some image resolutions.
• Alarm Bar Filter
  When activating the alarm bar by dragging it out using the mouse, the alarm bar symbols for filtering the displayed events could not be displayed.
• NFS File Server Configuration
  When configuring an NFS file server as a remote NFS file server or as an NFS file server of a (buffered) archive, the user ID and group ID settings were not correctly transferred to the camera and saved.
• Network messages with JSON
  When defining a network message in the Notification & Transfer pane of the Configuration view, after selecting the JSON type, no text field was displayed to enter the JSON value.

Known Limitations

• The online help is only in English language on the function level of version 2.7.2. In all other languages, the functional status of version 2. 6 is still described.
• Otherwise, the same restrictions apply as since version 2.1.1 of MxManagementCenter.

top

Release 2.6.1 of MxManagementCenter

Created on: 2022-07-25

Published on: 2022-07-26

Enhancements and Improvements

For more information about the new features described below, see the program's online help

Smart data search with Post Video Motion Detection (Post-VM)

Activation and configuration of Post Video Motion detection (Post-VM)

The following steps describe the necessary steps to set up a Post Video Motion Detection before it can be started:

• The new function is activated in the lower function bar of the Smart Data Search view using the button .
• In the upper area of the Post-VM tab, filter parameters for the time range to be searched, the desired camera, event types, etc. can then be specified.
• The search refers to the camera previously selected in the device bar or in the filter parameters.
• In the Post-VM-Plugin section, the current live image of the camera is displayed. There, various detection parameters such as the sensitivity can be set and tested with the help of current movements in the live image.
• The dialog elements in the Post-VM Plugin section, the behavior of a detected detection and the meaning of the individual parameters are identical to those of the Dialog Post Video Motion Detection, which can be opened with the symbol in the Playback and Grid Playback views.
• Using the icon in the upper-right right corner of the  Post-VM-Plugin  area, one or more windows can be defined within the camera image in which the subsequent video motion detection is performed.
• All settings of the current tab are automatically saved under the tab name and this can be changed at any time.
• Any number of Post-VM tabs, each with different settings, can be created and stored.

Configuration of the Post Video Motion Detection (Post-VM) from the playback

In the Playback and Grid Playback views, the Post Video Motion detection dialog can also be opened unchanged using the icon . A Post-VM search then can be configured and applied to the recording of a camera. With the help of the new PostVM button at the bottom of the dialog, the settings made there, including the selected camera, are automatically transferred to a new Post-VM tab of the Smart Data Search view and the view is opened with this tab. Before starting the Post Video Motion Detection in the Smart Data Search view, only the desired time range must be selected. This configuration option is suitable for all scenarios in which the scene of the recording to be searched is very different from the current scene of the camera live image, e.g. due to different lighting conditions and therefore the configuration of the Post-VM must be carried out on the recordings.

Start of the Post Video Motion Detection (Post-VM), result display and export

• With the help of the Search button in the upper right corner of the tab, the search is started with the settings of the currently selected tab.
• All images subsequently found by the search in the recording with corresponding changes are then displayed analogously to event images of a normal Smart Data search for events in the Result area.
• Also analogous to the display of an event search, a Preview image is available for each result image on the right side and function symbols for activating the Live, Playback and Mini Player views are displayed above each result image.
• With regard to the result display as a list or set of images (tiles) and their sorting, the same functions as for the result display of event images are also available.
• To export a result image, it is clicked with the mouse and  dragged and dropped into the previously activated export bar after holding for at least 2 seconds. The image is exported together with a time range of 10 seconds before and 10 seconds after the image!

Improved Histogram Display

• Moving the mouse to the left or right while holding down the left mouse button shifts the current time range on the timeline.
• By moving the mouse scroll wheel, the current time range can be increased or decreased.

Additional Smart Data Sources of MOBOTIX 7 Apps

Other improvements

• Automatic alarm confirmation
  The active Automatic Alarm Confirmation option in the Notifications area of the View > Settings dialog is used both to automatically confirm alarms in the alarm bar and to confirm activated alarm windows.
• Logging of search and export actions
  In the Monitoring area of the File > Preferences dialog, there is a new option Comment for research and export requried. By activating this option, a comment must be entered each time you switch to a view for searching and exporting recorded data (views Playback, Grid Playback, Smart Data Search). This is then output in the action log together with the associated action.
• Program remote control with TLS 1.2
  When using the Secure (SSL encrypted) option to remotely control the program, an application must now use TSL version 1.2 or later when sending the remote control commands for security reasons.
• Additional tool tips
  For some additional icons in the user interface of the program, the positioning of the mouse over the symbol displays explanatory texts (tool tips). This does not yet apply to the icons used in the device bar.
• Dialog Camera Configuration > Alarms
  In this dialog, the positioning of some elements has been improved.
• Configuration > Recording
  In the Recording > Recording Mode area of the View > Configuration dialog, the settings of the Start Events, Retrigger Events and Stop Events sections can now also be copied from one to other cameras, provided that the events used in them exist on all cameras!

Bugfixes

• Using the computer microphone on Mac computers
  When using the MxMC on Mac computers from version 10.15 (Catalina), the microphone could not be used to establish an audio connection to a camera. In these cases, the MxMC was not listed in the system settings as an application that wants to access the microphone and could therefore not be activated for it.
• Alarms in the graphic view
  For cameras that were displayed in the graphic view due to an unconfirmed alarm with a red symbol, sometimes the color of the symbol did not change after the alarm was confirmed, but remained red.
• Live remote image display on multiple monitors
  When using more than 2 monitors, calling the remote control command https://<IP Address>:<Port>/show?ip=<cameraip>&monitor=<Monitor No> to display camera live images in a separate window on these monitors resulted in an error: with a subsequent display of the same camera on a monitor, the window was not updated, but opened an additional display window, which completely covered the previous ones and thus led to an increased system load.
• Playback and positioning of recordings with gaps
  When playing recordings that contain gaps, the positioning of the player on non-existent data sometimes resulted in the displayed date and time values not matching the current position of the player in the recording.
• Corrections in the  area of configuration
• Copy Users
  In  the Users & Groups section  of the View > Configuration dialog, copying a user from one camera to another led to a program crash if the user in the source camera was assigned to a group that did not exist on the target camera. In this case, the user in the target camera is now not assigned to a group.
• Hidden areas with polygons
  When defining "hidden areas" in the Video  > Image Areas tab, the use of polygons using Polygon Mode was flawed: the areas were converted back to rectangles after saving.
• Snapshot of alarm images in Live View
  When viewing recent alarm images using the Alarm Settings icon of Live View, it was not possible to save these images using the Snapshot icon.
• PTZ actions on a PelcoD rotor head
  During the PTZ control of a connected PelcoD rotor head, inverting the Y direction using the corresponding setting in the Joystick PTZ area of the File > Settings dialog was not possible - the setting was ignored.

Known Limitations

• When using the Smart Data Source VT_Face.face from an App package prior to version ’MX Certified Apps Release 2022-09-01', no data will be displayed in the Smart Data search.
• The online help in German is still up to date with the previous version 2.6.
• The texts and names of the new functions inserted in the user interface are currently only up-to-date in English and German. In all other languages, the labels and texts for new controls still appear partly in English.
• Otherwise, the same restrictions apply as since version 2.1.1 of MxManagementCenter.

top

Release 2.6 of MxManagementCenter

Created on: 2022-03-02

Published on: 2022-03-02

Enhancements and Improvements

For more information about the new features described below, see the program's online help

New Smart Data Search view

This release includes a completely new Smart Data Search view that can be used to quickly search and view IoT camera events. It is possible to search for the data of the standard events of IoT cameras of the Mx6 and Mx7 model series, as well as for the result data of Certified Apps on Mx7 camera models, which are defined as Smart Data Sources. This new view combines the functions of the previous Smart Data Search with those of the Research view, which is no longer available, and also offers significant new functions (see below).

Using Smart Data-Search

• Definition and storage of different searches with specific search conditions that can be executed quickly at any time
• Selection of different search criteria in each search:
• In the first step, the Smart Data Source to be used for a search is selected here: either the type MobotixEventData for all standard events of the IoT cameras or a corresponding type for the search for the result data of an Mx7 Certified App (e.B.  FFLPR.plate, VaxALPR.plate, FFLPRAM.plate, etc.)
• In the second step, additional filter conditions can be defined for the Camera, Event Name, Recorded and Sensor Type properties. All search conditions defined here must be fulfilled at the same time (logical AND) and the search is thus further restricted.
• In addition, the time range to be searched can be defined very specifically.
• Search focus: By pressing the Search icon, the search is started according to the defined criteria and the result is determined. Depending on the selection in the device tree, the search is only applied to a single camera or a camera group. The name of the selected camera or camera group is displayed in the text Smart Data Search - <Camera/Group Name> in the MxMC title bar.
• List and Tile view: The result is then displayed in a multi-column list that contains various metadata such as camera name, event date, etc., or in a tile view with the associated event images. Switching between the two views is done using the Tile View and List View icons.
• Sorting of the result list: Each displayed metadatum can be used to sort the result list in descending or ascending order by using the corresponding column heading (e.g. Created). The currently set sorting is applied when switching to the tile view for the display of the event images.
• Event Image Display: Clicking a row in the results list or an event image in the tile view displays the associated event image along with some metadata in the Preview pane on the right side of the Smart Data Search view.
• Full-screen display: By clicking on an event image in the Preview area, this image is enlarged to the entire size of the MxMC window.
• Mouse Over function: By positioning the mouse over an event image in the tile view or in the Preview area, icons for activating the Live view of the associated camera, playing the event in the Instant Player and switching to the Playback view of the camera are displayed after a few seconds.

Configuring Smart Data Search

The Smart Data Sources used in Smart Data Search must first be activated in the Smart Data Sources tab of the Components view by selecting the Show results in search option. In addition, it is also possible to define at the same location for the Smart Data Sources listed there, whether and with which event data they are displayed in the Smart Data bar of the MxMC and which camera or camera group are evaluated for this purpose.

Additional Smart Data Sources of MOBOTIX 7 Apps

The support for Apps of the MOBOTIX 7 cameras within the Smart Data Search introduced with version 2.4 has been extended by additional apps. Overall, the result data of the following Apps are now available using the Smart Data Sources:

Integration of the new MOBOTIX Keyboard 

This version also supports the new MOBOTIX keyboard. This is an USB-enabled device that is primarily used to control virtual and mechanical PTZ cameras. The keyboard has the following controls and functions:

• 3-axis joystick for performing PTZ actions
• Jog shuttle for playback of recordings in playback view at different speeds, directions and step sizes
• 38 additional function buttons, which are equipped with very different functions of the MxMC.

After connecting the MOBOTIX keyboard to a USB port of the MxMC computer and starting the MxMC, the device is displayed in the Joystick PTZ area of the File > Preferences dialog and can be configured for use there. An initial calibration is recommended. The assignment of the function buttons can be seen from the printed pictograms. Additional information and a detailed description of the individual functions can be found in the online help of the MxMC under the keyword "Keyboard".

Improvements in the camera configuration

 Improvements have been implemented in the following areas of the Configuration view:

• Events > Image Analysis Events > Video Motion
  In this area VM windows can now only be defined if a VM profile has also been defined beforehand.
• Video > Exposure
  For cameras of the MOBOTIX 7 series, Wide dynamic Range (WDR) can now also be activated.
• Notification & Transfer
  When defining e-mail profiles in the Email area, a sender address can now also be defined.
• Hardware
  For door stations (T25 and T26), the LED lighting can be (de-)activated in the LEDs & PIR register.
• Recording
  The display of the event status in the Recording Mode area has been significantly improved:
• Events that trigger the recording are displayed in green
• Events that are active but do not trigger recording are displayed in light gray
• Inactive events are displayed in dark gray
• Advanced Remote Control command
  With the help of the following command, a camera group can be displayed as a grid on a specific monitor, with a specific camera of the group displayed in the focus window:
  https://<IP address MxMC>:<Port>/show?group=<group name>&ip=<IP address of the focus window camera>&grid&monitor=<monitor number

Other improvements

• E-mail Notification
  When defining Email notification in the area of the same name of the File > Preferences dialog, several e-mail addresses can now be entered in a row in the Recipient Address field, separated by the "character";".
• Option for user list at login
  In the General area of the File > Preferences dialog, there is a new option Do not show user list on login screen. After selecting this option, the user name and password must be entered when logging in to the MxMC - no selection of existing users is displayed.
• Display of disconnections
  In the Monitoring section of the File > Preferences dialog, there is a new option Highlight Connection Loss. After this option is enabled, disconnections to cameras in the Live and Grid views are indicated by an error message in the live image.

Bugfixes

• Data Export
  The export of camera recordings on a MxFFS medium (SD card, USB stick) or in a MxFFS archive was aborted under certain circumstances before the complete export of the specified time range. This was especially true for recordings with minor errors, such as e.g. those that can occur after a camera restart after an unforeseen power interruption.
• Corrections in different areas of the Configuration view:
• Users & Groups
  In the Users & Groups tab, a new group was created when renaming a user group instead of renaming the existing group. Additionally, due to a display error, it was not possible to change a password in the All Users tab.
• Time
  In the Time & Date tab, a registered time server was displayed in red even if it was available.
  
• Recording
  In the Backup Storage tab, defined passwords could not be transferred to other cameras using the Configuration Bar on the right side of the program window. In addition, the Domain field was sometimes not displayed.
• Installation on systems with an existing C++ runtime
  When installing MxMC on computers with an already installed Visual C++ 2015-2022 Redistributable (x64) package, an error message occurred. The application could still be started afterwards.
• Using the VaxALPR.plate as a Smart Data Source and playback via camera
  After activating and using the VaxALPR.plate app as a Smart Data Source, in the Playback view no recordings could be played back via the camera.
• Admin user without program access
  In certain rare constellations, it could happen that a sole user with admin rights could no longer log on to MxMC after a program restart.

Known Limitations

• The online help in German is still up to date with the previous version 2.5.2.
• The texts and names of the new functions inserted in the user interface are currently only up-to-date in English and German. In all other languages, the labels and texts for new controls appear in English.
• Otherwise the same restrictions apply as since version 2.1.1 of MxManagementCenter

top

Release 2.5.2 of MxManagementCenter

Created on: 2021-09-23

Published on: 2021-09-24

Enhancements and Improvements

For more information about the new features described below, see the program's online help

Advanced Softbutton (hyperlink) functions

The definition of Softbuttons (formerly Hyperlinks) has been fundamentally revised and is now done in the new Softbuttons tab of the View > Components dialog. There, any number of Softbuttons can be defined or subsequently changed and the following options are available:

• Specification of a complete HTTP command,  incl. Hostname, or separate input of HTTP command and hostname
• Use of SSL with specification of authentication data (user name and password)
• Result display in a separate window
• Display as a separate permanent symbol additional to textual selection in the Softbutton menu, with a large selection of graphical symbols (icons)
• Activation of soft buttons for any Camera Groups
• Differentiation of 3 different Command Types:
• Static Link: the HTTP command used is complete, including the host name, defined
• Camera Command: the HTTP command used does not contain the host name and is executed against the current camera
• Group Command: the HTTP command used does not contain the host name and is executed for all cameras in the current camera group
• Selection of predefined commands for different HTTP hosts (IoT cameras, MOVE cameras, MxMC, Patlite, Kentix and Loxone systems)

Thus, the definition of Softbuttons by a system administrator was clearly separated from the use of Softbutton functions by a normal user. The Softbutton functions defined in this way are selected unchanged via the  Softbuttons selection menu or any additional symbol defined for this purpose in the toolbar of the various program views.

Notification of health check results by e-mail

In the new Email Notification area of the File > Preferences dialog, a mail account can be configured to automatically send Health Check results. In addition to the settings for the mail server to be used, the following information can also be provided:

• Site: Used as the name of the mail sender in the generated mail.
• Recipient Address: The destination address of the sent mails is defined here.
• Interval: Here a time interval in hours is defined, after which an e-mail with the result of the Health Check evaluation is sent.

More Smart Data Source for MOBOTIX 7 Apps

The support for MOBOTIX 7 camera Apps within the Smart Data Search, introduced with version 2.4, has been extended by an additional App:

Project export for MOBTIX Live

• Export content
  The export of the project data for the MOBOTIX Live App now includes not only the camera connection data but also the grids (with a maximum of 25 cameras per grid) and a transfer of the first 12 Softbuttons. The extended export files will be used by the future version 2.6 of the Live App.
• Project export on Android systems
  Project files generated by using the File > Export to MOBOTIX Live... function, can now also be imported by the MOBOTIX Live app on smartphones with Android versions 5, 6 and 7. This was previously not possible on such devices due to incompatible encryption algorithms.

Other Improvements

• Automatic alarm confirmation
  In the Notifications area of the File > Settings dialog, there is a new option Automatic alarm confirmation to select different time intervals after which alarm notifications are automatically confirmed by the system.
• Connection failures
  When ignoring interrupted camera connections in the Lost Connections dialog, additional durations of 12 and 24 hours can be selected for ignoring. This makes it possible, among other things, to specifically exclude cameras that are not accessible due to maintenance work from the network monitoring for a sufficiently long time.
• Playback of MOVE Camera Recordings
  In the Playback view,  after playing IoT camera recordings in a different mode than Entire Recordings before switching to a MOVE camera, the mode first had to be changed to Entire Recordings. This is no longer necessary, but takes place automatically and the MOVE camera recordings are played back directly.
• Extension of the Action Log by alarm confirmers
  The manual confirmation of alarms is now also noted in a possibly activated Action log. The following information is logged in each case:
• Date and time of the alarm
• Alarm event type
• Date and time of alarm confirmation
• Confirmation comment
• Online help for data export
  The online help has been supplemented in the section Using The Application > Researching in MxMC > Exporting Recordings > Export Recordings From The Export Bar to explain a possible error regarding missing video data.

Bugfixes

• Display of the bars in the View menu
  After (de-)activating the different program Bars (Camera, Groups, Alarm, Histogram, Export, Smart Data) using the View menu and using the mouse, it could happen that the activation status of a bar displayed in the View menu did not match the current visible activation status.
• Loading project data in the Mac OS version
  In the Mac OS version of MxMC, the format  Known Formats, which can be selected to open a Project file, was incorrect and has been removed.
• View AI Camera Apps
  After selecting the menu item View > AI Camera Apps,  a program crash occurred.
• Data export from IoT cameras with public access
  An error occurred with integrated IoT cameras with Public Access still enabled when exporting recorded data.
• Quick Help
  The Quick Help, opened by the ? symbol in the upper right corner of the program, showed an incorrect text ("Retail Bar") for the Alarm Bar.
  
• Service report as Outlook mail
  The Help > Debug > Create Service Report function to send a service report by e-mail, generated an e-mail with incorrectly filled fields when using Outlook as a mail program.
  
• Activation of OpenGL
  In the General section of the File > Settings dialog, the OpenGL option can now also be activated on a system with an Open GL version 'OpenGL_ES_Version_2_0'.
  

Known Limitations

• The online help in German is still up to date with the previous version  2.5.1.
• The texts and labels of the new functions inserted in the user interface are currently only available in English.
• Otherwise the same restrictions apply as since version 2.1.1 of MxManagementCenter

top

Release 2.5.1 of MxManagementCenter

Created on: 2021-06-16

Published on: 2021-06-17

Enhancements and Improvements

Online help and language

The integrated supervisor function to secure certain functions of the MxMC against unauthorized use by the currently logged in user has been significantly extended. For this purpose, the following extensions have been integrated into the Dialog  User Management:  

• English online help
  The English version of the online help has been updated to the functional status of version 2.5. The German online help still describes the functional status of version 2.4.
• Language of the user interface
The texts of the user interface have been updated for the languages German, English and French. After selecting a language other than one of these three languages in the File > Settings > General dialog, only the English term is still available for some texts in individual function areas.

Installation on Windows

When installing the program on Windows systems, depending on the state of the Windows system files (C++ runtime system), a restart of the computer is required at the end of the installation to complete the process. This case is now reported by the installation routine to the user to perform the necessary restart then. Previously, the computer reboot was executed without any feedback.

Known Limitations

The same restrictions apply as since version 2.1.1 of MxManagementCenter.

top

Release 2.5 of MxManagementCenter

Created on: 2021-05-31

Published on: 2021-06-01

Enhancements and Improvements

Advanced supervisor functionality

The integrated supervisor function to secure certain functions of the MxMC against unauthorized use by the currently logged in user has been significantly extended. For this purpose, the following extensions have been integrated into the Dialog  User Management:  

• User type Supervisor
  New users of type  Supervisor can now be inserted. These each have a specific name and password, which must not be empty!
• Supervisor Configuration
  In this new section of the dialog, the supervisor function can be deactivated according to a 4-eye principle (current user + one supervisor), or a 6-eye principle (current user + two supervisors).

Smart Data Search with Export

The results of a Smart Data Search can now be exported to a CSV file to be selected by using the new CSV Export function symbol on the left above the result list. The delimiter between the columns is the character ';'.

Other Improvements

• Embedding cameras with public access
  When inserting a camera with "public access" activated, the Basic Authentication method is now used directly to establish a connection, without a dialog with a security warning being displayed.
• Dialog End-User License Agreement
  This dialog displayed after a new installation of the MxMC can now be scaled as desired and thus reduced in size at low resolutions.
• Camera configuration - Obscure Areas
  In the View > Configuration > Video > Obscure Area dialog now polygons can also be used when defining obscure areas in the camera live image. The switch between the resizing of an area and the polygon definition is done using the displayed icon Activate Polygon Mode.
• Online Camera Help - configuration
  The Management > Camera Configuration > Camera Configuration section now describes in more detail how to insert a dual image or individual sensor images of a dual camera.

Bugfixes

• Miniplayer in the Smart Data Search
  When playing recordings in the Mini-Player of the Smart Data Search, after changing the event selected in the results list, no symbols for operating the Mini-Player were displayed above the new preview image.
• Creating and copying camera users
  In the Configuration > Users & Groups view, a program crash could occur after creating a new user for a camera and trying to transfer that user to other cameras.
• Camera Configuration - hide image areas
  In the View > Configuration > Video > Obscure Areadialog,  the selection and application of a color for the Obscure Areas was faulty - the setting  Fill with mosaic was always used.
• Integration of MOVE cameras
  When inserting MOVE cameras with factory settings into the MxMC, the automatically generated image profile  MxHiQuality was not generated correctly and led to poor image quality of the camera.
• Activation of Camera App Licenses
  For cameras that are integrated into the MxMC via a remote URL (DynDNS name + port no.), the activation of licenses in the Windows > Camera App Licenses dialog failed.
• Live Recorder
  The function symbol Live Recorder could also be activated in camera grids without a focus window and then had no function. For such grids, the button is now deactivated.
• PTZ on MOVE cameras
  After performing and stopping PTZ actions on MOVE cameras (SD1A models), a subsequent left mouse click led to a new PT action instead of just displaying the current image throughout the MxMC window.
• Snapshot function on Mac
  In the Mac OS version, two images were always generated when pressing the Snapshot function symbol, even if the MxMC had not performed any subsequent image dewarping.
• Alarm handling of camera Meta-Events
  The handling after receiving Meta-Events (Logical Events) of a camera was faulty.
  

Known Limitations

The same restrictions apply as for the previous version 2.4.4 of MxManagementCenter.

top

Release 2.4.4 of MxManagementCenter

Created on: 2021-03-26

Published on: 2021-03-31

Enhancements and Improvements

More Smart Data Source for MOBOTIX 7 Apps

The support for MOBOTIX 7 camera Apps within the Smart Data Search introduced with version 2.4 has been extended by an additional App:

The same applies to the setup and use of the generated App data within Smart Data Search as for the Apps already supported with the previous version 2.4. This App is included in the App package 2021-03-17, which is available for download in the Certified Apps section of the MOBOTIX web site.

Export

When exporting recordings to MXG, AVI or H.264 video clips, the minimum file size can now be set to 300 MB instead of 600 MB.

Bugfixes

• Program start for Windows users with special characters
  After a Windows user logged on, whose login name contains special characters (ä, ü, ö, %, .,...), the MxMC could not be started.
• Camera Export for MOBOTIX Live
  When exporting the embedded cameras via the menu item File > Export to MOBOTIX Live... the port specification of defined remote connections was not taken with.
  

Known Limitations

The same restrictions apply as for the previous version 2.4.3 of MxManagementCenter.

top

Release 2.4.3 of MxManagementCenter

Created on: 2021-02-24

Published on: 2021-02-25

Enhancements and Improvements

More Smart Data Sources for MOBOTIX 7 Apps

The support for MOBOTIX 7 camera Apps within the Smart Data Search introduced with version 2.4 has been extended by two additional Apps:

The same applies to the setup and use of the generated App data within Smart Data Search as for the Apps already supported with the previous version 2.4. Once these new Apps are available in the firmware for MOBOTIX 7 cameras, they can be used as Smart Data Sources in the MxManagementCenter.

Bugfixes

• MXU Import
  After importing a list of cameras using the File  > MXU Import... menu function, in the Clip and Recording Configuration dialog, the camera connection data for URL and Remote URL were swapped.
  

Known Limitations

The same restrictions apply as for the previous version 2.4.2 of MxManagementCenter.

top

Release 2.4.2 of MxManagementCenter

Created on: 2021-01-27

Published on: 2021-01-28

Enhancements and Improvements

Action Log

The functions for generating and subsequent processing of the Action Log have been significantly expanded and adapted so that Action Logs from different MxMC instances can also be generated and managed centrally. This includes the following changes:

• In the File > Preferences > Monitoring  dialog, there is now a Backup Path field in the Action Log section to define a path in which the action log files are generated.
  
• Below the defined path, the action log files are generated by each MxMC instance in a subfolder  called the "Windows Host Name" of the MxMC machine.
• For better file management, each Action Log file includes the current date and Windows Host name in its name. Each action log, for reading and further processing is stored as a  PDF and  CSV file and for display in the MxMC additionally in a binary file  '*.mxl'. 
  
• Within the action log, the Windows Host name is output at the beginning and a log entry is also made if the above Backup Path has been changed.
• If the connection to the Backup Path fails, a warning message with error handling details is displayed and logging continues temporarily in a local file.

Camera Project Data for MOBOTIX Live

Via the new menu item File > Export to MOBOTIX Live... you can export the connection data of all currently integrated or the cameras of the currently selected group to a file to select '*.mobotixlive'. After the transfer to a smartphone (e.B. via iCloud) this file can then be imported into MOBOTIX Live (from version 2.5 on). After import, all previously exported IoT cameras are integrated into MOBOTIX Live with both their local and possibly specified remote IP addresses

SSL connections to MOVE and ONVIF cameras

When integrating MOVE or other ONVIF cameras via the HTTPS/SSL protocol, the certificate is now checked precisely as for IoT cameras. You can view the certificate information and trust the certificate once or always.

Program Help

The following additions and improvements have been made in the program help:

• Online help for version 2.4 now also available in German
• Extended description of importing cameras using . MXU Files  (OLH - Setup > Import Existing Project > MXU Files...")
• Description of the integration of individual image sensors of an IoT dual camera (OLH - section "Managing > Camera Configuration > Camera Configuration")
• Description of the Group Sequencer function in Context(F1) Help

Camera configuration

• Thermal Delta Analysis
  For embedded Thermal TR cameras, the Configuration > Events > Environmental Events view can now also define Thermal Delta Analysis events.
• SNMP Configuration
  In the Network area of the View > Configuration dialog there is a new Register SNMP Configuration to set up the camera for management using an SNMP client.

Bugfixes

• Using a Proxy Server
  The definition of a system-wide or custom proxy in the File > Settings > Network dialog caused connection errors when accessing the integrated cameras.
• MXU File Import
  Integrating a list of cameras using the File  > Import MXU... menu function was faulty and resulted in an empty camera list.

Known Limitations

• Smart Data Sources for FFGroup App
  Starting with this version of the MxMC, FFGroup's camera Apps are only supported within Smart Data Search if they come from a Certified App Release V7.1.3.15 or later

In addition the same restrictions apply as for version 2.1.1 of MxManagementCenter.

top

Release 2.4.1 of MxManagementCenter

Created on: 2020-11-17

Published on: 2020-11-18

Enhancements and Improvements

More Smart Data Sources for MOBOTIX 7 Apps

The support for MOBOTIX 7 camera Apps within the Smart Data Search introduced with version 2.4 has been extended by two additional Apps:

The same applies to the setup and use of the generated App data within Smart Data Search as for the Apps already supported with the previous version 2.4. Once these new Apps are available in the firmware for MOBOTIX 7 cameras, they can be used as Smart Data Sources in the MxManagementCenter.

Translations and online help

Other improvements

• Certificate for SSL Connection
  The certificate used for remote control calls over an SSL connection to the MxMC has been protected against misuse.
• Device Tree
  By using larger arrow icons, the device tree on the left side of the MxMC program window is easier to use.
• Integration of P2 cameras (M12, D12,...) via SSL
  Camera models of the P2 line (M12, D12, etc.) can now also be integrated into the MxMC via SSL.

Bugfixes

• Various fixes
  Several minor bugs in the areas of Smart Data Search,  Camera Configuration and Data Export have been corrected.

Known Limitations

The same restrictions apply as for version 2.1.1 of MxManagementCenter.

top

Release 2.4 of MxManagementCenter

Created on: 2020-10-26

Published on: 2020-10-27

Enhancements and Improvements

Smart Data Sources for MOBOTIX 7 Apps

For IoT cameras of the MOBOTIX 7 series with firmware from version 7.1.2.24, within the MxMC the meta data of the analysis results of various Apps can now be filtered and displayed in the Smart Data Search. This makes it possible, for example, to filter the license plates identified by a License Plate Recognition App by a specific region and to display the result in the Smart Data search. For the Apps of the MOBOTIX 7 cameras, this feature is royalty-free in the MxMC, unlike the other Smart Data Sources. Currently, the followinng Apps are supported:

• FF Group and Vaxtor License Plate Recognition (LPR) Apps
• Visage Technology App for Facial Recognition

To set up this feature for an App, the following steps are required:

• Enable Smart Data support and define the required Smart Data Source for the desired App on the MOBOTIX 7 camera in the Admin > Camera Administration > Smart Data Configuration dialog. To do so the following names are allowed:
• FFLPR.plate (FF Group Kennzeichenerkennungs-App)
• VaxALPR.plate (Vaxtor Kennzeichenerkennungs-App)
• VT_Face.face (Face Technologies Gesichtserkennungs-App)

• Insert and configure a new Smart Data Source of type P7 App in the Smart Data Sources tab of the Components view.  The name of the Smart Data Source previously defined in the camera, is automatically entered as the name in the MxMC. Select then the App concerned as P7 App and the associated camera as the Data Source.
• Insert a new search profile and run the search in the Smart Data Search view with the previously added Smart Data Source.

Creation and installation of own SSL certificates

In the Wizards & Tools view, there is the new SSL Certificates feature. Selecting this function starts a wizard that can be used to upload a previously created SSL certificate to the camera or group of cameras currently selected. Alternatively, a new certificate can be created first and then uploaded to the camera or cameras of the current camera group. The root certificates used in both operations are copied to a user-specific directory of the MxMC and used for later verification of the cameras' certificate when connecting to the cameras. 

Histogram and alarm bar

The positions of the Event Histogram and the Alarm Bar have been changed so that the histogram now appears horizontally below the display area and the alarm bar appears vertically to the right of the display area. The most recent event is displayed at the top of the alarm bar. In the course of this change, the histogram function has also been optimized for the following points:

• More striking representation of the current position ("position marker")
• Red marking of histogram values for which a recording also exists
• Improved presets:
• Display of 2 strips
• View only events with recordings
• Time range of the top bar preset to one day

Other improvements

• Remote Control
  The remote control commands were enhanced by the call  <ip:port>/groupsequencer?on|off  to activate | de-activate the group sequencer function.
  
• Access data from the program settings
  The access data and passwords entered in the dialog File > Settings for Remote Control,  Proxy and MxMessageSystem are now more securely encrypted (AES-256) stored in the system.
• Securing the Acces.json file
  The user-specific file  %appdata%\Mobotix\MxManagementCenter\UserAccess.json has been protected against user rights tampering.
• Customization of the user interface
  In the Dialog File > Settings there is a new area Customization, where some basic settings of the user interface can be customized. This allows partners to customize the MxMC individually for their customers and in particular to use their own program logo.
  

Bugfixes

• MOVE Cameras with Remote Access
  When integrating MOVE cameras over a remote connection (NAT address) and using the RTP/RTSP via HTTP protocol, no live image was displayed.

• Camera Configuration
• Thermal Events
  When configuring thermal TR events in the Events > Environment Events > Thermal Radiometry area of the Configuration view, defined polygons for the measurement range were not applied correctly.
• MxAnalaytics
  Deleting and adding Counting Corridors in the Camera Apps > Mobotix Analytics area of the Configuration view was incorrect.
• Actions and Notification & Transfer
  In these areas of the Configuration view, empty tabs were displayed
• Remote Control (Speaker)
  The command  <ip:port>/... &speaker=off to disable audio output from the current camera did not work in Grid view

Known Limitations

The same restrictions apply as for version 2.1.1 of MxManagementCenter.

top

Release 2.3.4 of MxManagementCenter

Created on: 2020-09-30

Published on: 2020-10-01

Enhancements and Improvements

Configuration of new IoT Camera Apps

This release allows you to configure the following new apps, which are available for IoT cameras starting with firmware version 7.0.6.18:

• MOBOTIX Analytics
  The App supports the MxAnalytics functions known from previous camera lines.
  
• Object Recognition
  This allows optionally using object detection based on AI/Deep Learning Techniques to perform the MOBOTX Analytics functions. The App is used to configure object recognition. Object recognition is then used within the MOBOTIX Analytics functions, e.g. for counting corridors, by activating the Use AI component option within the configuration of MOBOTIX Analytics.
  
• FF LPR und Vaxtor LPR
  These are two new Apps for Licence Plate Recognition (LPR).
  

For configuration, there is a register of the same name for each of these Apps in the Camera Apps section of the Configuration view.  For details on installing and using these new apps on an Mx7 camera, see the release notes for version 7.0.6.18

Smart Data Enhancements

• Individual filter values are evaluated directly as you type and the result list is updated accordingly.
• For the HUTH protocol, there is an additional column "Number. The HUTH protocol also supports the additional filter criterion "Product Group Reversal".
• The simultaneous selection of multiple Smart Data Sources for the search is now retained even over a program restart.

Licenses

Starting with this release, the functions below the View > Configuration menu for configuring IoT cameras and in the Health Check section below the View > Assistants & Extras menu for monitoring IoT cameras, are royalty-free. They can be used directly without registration and without purchasing a license.

Other improvements

• TLS version
  In the Access tab of the Network section of the Configuration view, the minimum TLS version can now also be defined.
  WARNING: This new option is only visible in "Expert mode".
• Default setting for Remote Control
  The default setting in the Remote Control section of the File > Preferences dialog has been changed to Secure (SSL-encrypted).

Bugfixes

• Playback of IoT camera recordings
  The version includes many improvements and fixes in the area of playback of IoT camera recordings, using a direct fileserver access:
  - This includes problems after changing the camera during playback and switching between different playback functions (fast forward, fast backward, etc.)
  - With recordings to a CIFS file server as the Primary Target (folder/file structure), playback behavior has been improved in case of recording problems (e.g. access errors to file '.erdinfo', missing sequence folders, etc.).
  - In addition, program performance in playback of recordings with direct file server access and the entries in the MxMC log files have been improved.

• Playback of MOVE Cameras
  During playback of MOVE camera recordings on a MOBOTIX NAS device, time searches/positionings in the Playback view were sometimes not performed.

• Drag & Drop in Playback
  After entering a search time in the Playback view, a drag-and-drop camera change caused a program crash.

• Remote Connections to MOVE Cameras
  When integrating MOVE cameras over the Internet by using NAT addresses (http://<external IP address>:<port nr>5556/...) there could be problems displaying the live image.

• Removing cameras in application mode "Pre-Configuration"
  In the “Pre-Configuration” application mode, a program crash could occur when removing cameras using the Delete Icon below the device tree.

• Grid-Playback and Date/Time Entry
  If you displayed a camera in the Grid-Playback view by a single mouse click in full-screen mode and then clicked on the text box to enter a search time, the program could crash.

Known Limitations

The same restrictions apply as for version 2.1.1 of MxManagementCenter.

top

Release 2.3.2 of MxManagementCenter

Created on: 2020-06-10

Published on: 2020-06-15

Enhancements and Improvements

• Improved counting corridor evaluation
  In the result display of the cumulative counting corridor evaluation, integrated in version2.3.1, long response times of the integrated MxAnalytics cameras could result in the displayed number of shop visitors still allowed jumping between different values. This behavior has been improved. In addition, the dialogues and texts of this new function are now available in German and French in addition to English.
• Smart data search for HUTH cash point systems
  When defining smart data searches for an integrated Huth cash point system, you can also search for the Product Group. An additional field has been added to the Total selection for entering a receipt number. In addition, all fields are now reset when you create a new smart data search profile. These were previously initially occupied with incorrect search attributes.

Known Limitations

The same restrictions apply as for version 2.1.1 of MxManagementCenter.

top

Release 2.3.1 of MxManagementCenter

Created on: 2020-06-08

Published on: 2020-06-09

Enhancements and Improvements

Cumulative counting corridor evaluation ("Customer Counter")

This version allows the accumulated evaluation of MxAnalytics counting corridors of several integrated cameras and the display of the result in a separate dialog. For example, after the corresponding definition of counting corridors at the entrances and exits of a shop, customers are counted and evaluated as passes in "north direction" when entering and when leaving as passes in "south direction". The current number of visitors to the shop is then the difference between all passes in north direction and the passages in south direction. This, together with a previously defined limit, determines the number of customers who are still allowed to enter and the number is displayed in a separate dialog. The setup and display of the result are carried out as follows:

• Definition of the required counting corridors for the entrances and exits of a shop, in the Analytics section of the Configuration view or in the browser Setup > MxAnalytics control > General MxAnalytics Settings dialog of the mounted cameras.
• Definition of all MxAnalytics cameras involved in the evaluation in the new dialog Windows > Customer Counter > Customer Counter Settings. In this dialog, settings for the behavior of the evaluation dialog Customer Counter (limit, correction value "Offset", titles, texts for entering, warning message when the limit is exceeded, etc.) can be defined.
• Evaluation of the current counting corridor values of all integrated MxAnalytics cameras and display of the overall result (number of shop visitors still allowed) by opening the dialog Windows > Customer Counter.

Other improvements

• Supplements of online help
  In the online help the function of the Group Sequencer was described.
  

Bugfixes

• Pre-Configuration and Control Panel
  In Program Mode Pre-Configuration, selecting the menu entry View > Control Bar caused a program crash. The program could then only be restarted if the project data had been deleted beforehand. 
• Selection in the View menu
  In the View menu, all other views could be selected in the program mode  Pre-Configuration  in addition to the supported Grid, Wizards & Tools and Configuration views, but their selection was not effective. In addition, all views selected in the menu were always displayed as selected instead of just the currently active one. 
• Export with image distortion
  When exporting hemispheric images with image dewarping done by the MxMC there were image errors (missing image parts at the top and bottom and the image was partially pixelated).
• Audio in alarm window
  No sound was output when displaying the alarm pop-up window, e.g. after calling a door station or receiving a VM alarm.
• ONVIF cameras
  When including and displaying some ONVIF cameras (e.g. LiLin) a crash could occur due to non-ONVIF compliant behavior of the cameras.
• Definition of MxAnalytics counting corridors
  In the Analytics area of the Configuration view counting corridors could be defined, but no longer selected, modified, or deleted.
• Definition of Thermal TR Events
  When defining windows for thermal TR events in the Environment Events area of the Configuration view, polygons could no longer be set as windows in the camera.

Known Limitations

The same restrictions apply as for version 2.1.1  of MxManagementCenter.

top

Release 2.3 of MxManagementCenter

Created on: 2020-04-29

Published on: 2020-04-30

Enhancements and Improvements

Program mode "Pre-Configuration"

For simple applications, or if MxMC is not the main VMS, for example because the cameras are used in Genetec or the MOBOTIX CLOUD, the new program mode Pre-Configuration can be used: The MOBOTIX cameras can be secured, updated and pre-configured particularly quickly and easily.

• For simplified handling, only the Grid, Wizards & Tools and Configuration views (reduced configuration view with the presets relevant to external VMS) are available in this mode.
• This mode can be activated directly in the Welcome Wizard after installing the program or deleting the project data and then starting the MxMC. Alternatively, it can be activated and deactivated via the Switch Usage Mode entry of the Projects and Network Environments selection menus  in the upper right corner of the program window.
• The usage mode Pre-Configuration is indicated by an additional line at the top of the program window.

Improved integration of MOBOTIX NAS devices

To make it easier to integrate MOBOTIX NAS devices via the Components view, this view has been extended to include the MOBOTIX NAS Configuration section with the following sub-sections:

• Quick Guides:
  This section provides two links to the relevant manuals on the MOBOTIX web page that describe how to set up a MOBOTIX NAS device for MOVE/ONVIF and IoT cameras.
• Installation and Configuration:
  From here you can directly start the program "Device Finder" to find a MOBOTIX NAS device and then perform the various configuration steps of the device using a web browser.
• Troubleshooting:
  In case of an error, two log files of the MOBOTIX NAS device can be accessed directly from here in order to get information on possible causes of the error.
  
• Download links:
  Here links to download the current required SW programs of a MOBOTIX NAS device from the MOBOTIX website are offered.

Using Mx7 Camera App by A.I. Tech

With this version, you can configure installed and licensed apps from A.I.Tech for integrated Mx7 camera models and also display their results. The configuration and result evaluation are done for MxMC users with admin rights via the Camera Apps section of the  Configuration view or the selection of the new AI Camera Apps  entry from the View menu.  The new AI Camera Apps entry of the View menu can also be used for MxMC users without admin rights to evaluate the results using the AI Dashboard.

Other improvements

• Group Sequencer
  In the Grid view,  there is the new Group Sequencer symbol. This enables the automatic change of the Grid view between the groups defined in the MxMC after a selectable Duration.  All groups of the device tree, except the "All Cameras" group, are traversed from top to bottom. The Combined Sequencer setting causes the camera displayed in a possible focus window within the Grid views to be automatically changed after the Duration set in the Camera Sequencer, before switching to the Grid view of the next group.
• Toolbar in Grid Focus window
  In the Group Functions dialog to define group properties, there is the new Focus View section with the Show Overlay Control option. This allows you to set whether the toolbar at the bottom of a grid focus window is displayed permanently (=On), not at all (=Off), or only when receiving the mousefocus (=Auto).
• Translations
  In this version, all user interface texts are available in English, German and French.

Bugfixes

• Data Export with Zoom
  When exporting data with zoom enabled, the PTZ positions currently set in the Playback view were sometimes not applied correctly or not at all. 
• Send project data by e-mail
  The function E-mail to... in the  Projects and Network Environment menu did not work correctly on Windows 10 with MS Outlook as the mail program. 
• Crash in systems without OpenGL
  When starting the MxMC on Windows systems without installed OpenGL drivers, e.g. Windows 2008 Server, a program crash occurred.
• Camera Configuration MxFFS Archive
  In the camera configuration, the size of an MxFFS archive (Max. Backup Size) could not be changed for all selected cameras.
• Dewarping of hemispheric images
  When dewarping and performing PTZ actions on images from hemispheric cameras, one could move too far outside the visible camera image. 
• PTZ in subviews of dewarped Grid tiles
  In Grid-Edit mode, when performing PTZ actions in subviews of Grid tiles dewarped by the MxMC to display hemispheric camera live images (e.g. in view mode Surround, or Panorama Focus), some PTZ actions could change the other subviews of the Grid tile in addition to the current one.
• PTZ settings of grid tiles
  The PTZ positions set in Grid-Edit mode for individual grid tiles were sometimes not saved correctly and were lost when switching between different grid views (groups). 
• Display of grids on multiple monitors
  After logging off and logging on users, the groups previously displayed on a second or further monitor were sometimes no longer displayed there.
• User-specific camera accesses after configuration changes
  After changing MxMC project data and starting the MxMC via command line with these project data (by calling  "... MxManagementcenter --import <Path of the MxMC project file>") a user could also access cameras that are otherwise locked for him, when he logged in MxMC for the first time after the last program start.

Known Limitations

• Selection in the View menu
  In the View menu, all other views can be selected in the new program mode  Pre-Configuration  in addition to the supported grid,  wizards & tools  and  configuration views - but their selection has no effect. In addition, all views selected in the menu are always displayed as selected instead of just the currently active one in the menu.
• Pre-Configuration and Tool Bar
  In usage mode Pre-Configuration selecting the menu entry View > Tool Bar leads to a program  crash. The program can then only be restarted if the project data is deleted beforehand.

Otherwise the same limitations as for MxManagementCenter release 2.1.1 apply.

top

Release 2.2.2 of MxManagementCenter

Created on: 2020-02-13

Published on: 2020-02-14

Enhancements and Improvements

Improved alarm handling

• Weekly profiles with holidays
  For the weekly profiles defined below the Alarms option in the Camera Configuration  dialog and applied when receiving camera events, holidays can now also be entered. It is possible to define any day in the calendar as single or recurring holidays. These can then be activated or deactivated in the Alarm Overview of the Alarms dialog specifically for the alarming of individual event types.
• Alarm notifications
  The size of the window that is shown when an alarm is received and displays the associated event image of the alarming camera can now be adjusted. For this purpose, an Alarm size can be set as a percentage of the screen size in the dialog File > Settings > Notifications.

Bugfixes

• Camera Configuration
  When  configuring cameras, there were problems in the Recording > Recording mode and Actions dialogs and stopping the recording or for starting the actions.
• Direct access to MxFFS media
• When accessing MxFFS media directly for playback and exporting the video (and audio) data stored on it, a dialog for entering the MxFFS encryption password was sometimes displayed for unencrypted recordings. This dialog could be ended by entering any text and then you could access the data correctly.
• When accessing MxFFS media that contained areas of incorrect data, data that was stored correctly was also partially not displayed.
• Export with dewarping of a dual sub-image
  When exporting the left or right partial image of a hemispheric dual image recorded in full image mode with activated dewarping by the MxMC (vPTZ view  Normal  or  Panorama) a program crash occurred.
• Playback of hemispheric images with subsequent equalization
  When playing back recorded full images with activated dewarping by the MxMC (vPTZ view  Normal,  Panorama,...) the installation type (wall, ceiling, floor) set in the camera was not evaluated correctly and therefore the vPTZ actions were not executed correctly.
• Smart Data Sources
  When integrating third-party systems via the Smart Data Interface, sometimes the Smart Data Source was no longer known and no results were displayed in the Smart Data Search  view.
• Program crash during camera (device) search
  The handling of searches that involved ONVIF devices with non-ONVIF-compatible device information has been further improved.

Known Limitations

The same limitations as for MxManagementCenter release 2.1.1 apply.

top

Release 2.2.0 of MxManagementCenter

Created on: 2019-12-04

Published on: 2019-12-05

Enhancements and Improvements

Exporting Hemispheric Images

When exporting hemispherical images to AVI (M-JPEG) and MP4 (H.264), you can now apply distortion correction as an export option in MxMC. In the Export Profile dialog, activate the additional Dewarp Enabled option to apply the currently selected display mode in Playback also for exporting the hemispheric full image.

Reverse Playback of Recordings from MOBOTIX NAS Devices

This version supports playing back recordings of MOBOTIX MOVE and other ONVIF S-compatible cameras from MOBOTIX NAS devices with up to 8x speed. This requires updating the MOBOTIX NAS Recorder Software to release 1.2.3.1 on the MOBOTIX NAS device.

Directly Accessing MxFFS Media

You can now directly (i.e., without the camera) browse, play back, and export the recordings of MOBOTIX IoT cameras directly from MxFFS media (USB flash/hard drives, SSD drives). Select the new “MxFFS Medium” device type in the MxMC device tree to and an attached USB MxFFS storage device to MxMC. You can then activate the Playback view for accessing the recordings and for exporting.

Support of Mx7 Models

Besides the established Mx4/5 Mx6 camera models, this release also supports the new M73 and the other Mx7 models that will follow. To support the new models, two new features have been added.

• Licensing of the MOBOTIX Apps
  Open the Windows menu to open the new Camera Apps Licenses dialog that allows activating apps on Mx7 cameras.

• App Configuration
  The Configuration view has the new Camera Apps tab for configuring the apps that are installed on the camera.

Other Improvements

• Online help
  The Program Settings, vPTZ and Live Recorder sections of the online help has some additions.

• Camera Configuration and MxThinClient
  Configuring cameras and adding MxThinClient devices has been improved.

• Digital signatures
  To avoid security warnings from Windows Defender, the setup and executable files are now digitally signed.

Bugfixes

• Export issues with faulty recordings
  When trying to export recordings from a file server with a faulty folder/file structure (missing or corrupt files), the export feature sometimes did not export files that were outside of the faulty ranges.

• MxClient integration
  When searching MxThinClient devices on the network, the number of found devices in the Components view was too high.

• Adding MOBOTIX MOVE cameras
  When adding MOVE cameras in the the Welcome wizard, the program misleadingly offered to change the IP address.

• Playback of recordings from MOBOTIX NAS devices
  When playing back recordings of MOBOTIX MOVE and other ONVIF S-compatible cameras from MOBOTIX NAS devices, the program sometimes acted up and stopped playing back.
  Note: This bugfix mandates an update of the MOBOTIX NAS Recorder Software to release 1.2.3.1.

• Program crash during camera (device) search
  The handling of searches that involved ONVIF devices with non-ONVIF-compatible device information has been improved.

• RTP(S) via HTTPS tunnel
  RTP(S) streaming of MOBOTIX MOVE and other ONVIF cameras via an HTTPS tunnel did not work properly.

• Playback from Buffered Archive
  After switching the camera recording from SD card to Buffered MxFFS Archive, MxMC showed the “Invalid MxFFS Key” error message in Playback view, although accessing the recordings worked properly afterward.

• MxMC release update feature
  The update feature of MxMC did not work properly.

• Configuring of hemispherical cameras
  Configuring the display mode of cameras with two hemispherical lenses did not work properly for both sensors.

Known Limitations

The same limitations as for MxManagementCenter release 2.1.1 apply.

top

Release 2.1.2 of MxManagementCenter

Creation Date: 2019-09-23

Publishing Date: 2019-09-25

Bugfix

Known Limitations

The same limitations apply as for version 2. 1. 1.

top

Release 2.1.1 of MxManagementCenter

Creation Date: 2019-07-26

Publishing Date: 2019-07-31

Enhancements and Improvements

Wizard for Initializing MOBOTIX Door Stations

The Wizards & Tools view now contains the new Initialize Door Station feature. After selecting a door station (T25, S15, T26, S26, S16) in the device tree, you can start this wizard in order to set up MOBOTIX door stations and MxDisplay devices for the first time. Note, that the door stations must have been added to MxManagementCenter and the MxDisplay devices must be visible in the network. The wizard performs the first important configuration steps and provides additional information to the remaining configuration, i.e., to the configuration tasks you need to perform after finishing the wizard.

• Initialization Results
  After completing the different steps of the wizard, the selected door stations and MxDisplay devices have been configured so that the MxDisplay devices and MxMC have been added as intercoms and will be alerted if someone rings a bell at one of the door stations. This means that executing the auto configuration by pressing the bell button (Mx4/5 models) or the light button (Mx6 models) at a special point in time after booting the device is now obsolete.
• Remaining Configuration
  The remaining steps for configuring the door stations will still have to be executed at the individual devices or on the web interface of the door stations. These steps include initializing the door stations modules (KeypadRFID, BellRFID), entering the Super PIN, training the RFID cards, definition of door bells and other configuration steps such as the proper assignment of existing door bells/number codes to intercom devices. The last page of the wizard contains more information on these steps.

Note: To use this new feature on Mx6 door station, they need torun a software release 5.2.4.15 or higher, Mx4/5 door stations require a software release 4.7.2.34 or higher.

Improved Integration of MOBOTIX NAS Systems

Accessing the recordings of MOBOTX MOCE cameras on MOBOTX NAS systems has been greatly improved in several ways:

• Fast playback (forward)
  Playing back recordings in the Playback and Grid Playback views can now use fast forward with up to 8x speed.
• Fast data export
  The recordings of MOVE cameras on MOBOTIX NAS devices are now exported significantly faster that in real time. The export speed is mainly depending on these factors:
  • Performance and current load of the NAS device (if the load is high, the NAS may not be able to read the data fast enough).
  • Target resolution of exported data (the higher the resolution, the more time is required).
  • Target frame rates of exported data (the higher the frame rate, the more time is required).
  • Performance of the computer's CPU.

Note: To access the recordings of MOBOTIX MOVE cameras, this release of MxMC mandates that the minimum software release of the MOBOTIX NAS Recorder Software (QVRProServer) on the NAS device is 1.2.2.1 or higher.

Support of the PelcoD Protocol

This release allows using controlling MOBOTIX IoT cameras mounted to PelcoD PTZ heads. Once a camera has been attached to the PTZ head and properly configured, all commands sent using the mouse or a joystick will be sent as commands to the PTZ head. The camera will execute zoom actions as digital zoom actions like before. The following steps are required to use a PelcoD PTZ head:

• Mount the camera to the PTZ head and establish the serial connection to the USB interface of the camera using an FTDI-to-USB adapter.
• Activate the USB RS232 interface of the camera in the Admin Menu > Hardware Configuration > Manage Hardware Expansions dialog and restart the camera.
• Configure the serial interface of the camera in the Admin Menu > Serial Interface > Setup dialog and restart the camera.
• Add the camera in MxMC using the MOBOTIX with PelcoD option as connection protocol.

Note: To use this new feature on Mx6 door station, they need to run a software release 5.2.4.15 or higher, Mx4/5 door stations require a software release 4.7.2.34 or higher.

Improved Integration of MxThinClient Devices

The Components view now has the additional ThinClients tab. This tabs allows searching all MxThinClient devices in the network, add them to MxMC and configure the access data and the most important settings.

Other Improvements

• PTZ Mouse Control
  When using the mouse pointer to send PTZ (pan, tilt, zoom) actions to cameras connected via one of the protocols MOBOTIX MOVE, Axis, ONVIF, and PelcoD, upward/downward movements now translate to movements of the camera up/down, respectively. The behavior of PTZ control with a joystick remains as defined in the Settings.

Bugfixes

• Wrong data when accessing MOBOTIX NAS devices
  When playing back recordings of MOVE cameras from a MOBOTIX NAS device, the video data played back sometimes did not belong to the selected, but to a different MOVE camera.
• MxMOVE cameras and Grid Playback
  When using MxMOVE cameras or other ONVIF S cameras in Grid Playback, using an additional Focus window was not possible since it was not possible to show these cameras in the Focus window and another grid tile at the same time. Furthermore, when showing many MxMOVE/ONVIF S cameras (> 10), the Grid Playback view sometimes showed gray tiles.
• RTP/RTSP via HTTPS
  When setting the connection protocol to RTP/RTSP via HTTPS when adding MxMOVE or other ONVIF S cameras, this setting was not stored properly. You had to apply the setting once more in the Camera Configuration dialog after adding the cameras.
• Display mode of Hemispheric cameras
  The display mode set in hemispheric cameras in the Live, Playback and Grid Playback view sometimes got lost when changing views and returned to full image display mode.
• Configuration – exposure windows
  After changing the preview image on the Video > Exposure tab, exposure windows defined beforehand were not displayed properly.
• Spanish translation
  The Spanish translations of the Camera Configuration dialog and the Configuration view contained errors.

Known Limitations

• Access to MxMOVE recordings in QVRPro
  The user, which has been set up to access the recordings on a MOBOTIX NAS must have at least supervisor privileges in QVRPro or otherwise this may not be possible.
• Access to camera recordings
  It is possible that no images are displayed in the Playback view if a camera has just been added to MxMC. If this happens, the user should restart MxManagementCenter.
• VoIP/SIP client
  To activate the VoIP/SIP client of the camera, a camera reboot is required after activating the corresponding option on the VoIP Telephony tab in the Configuration view (there is no indication of this circumstance).
• Playback without audio device
  When playing back recordings in the Playback view of MxMC on Windows without having an audio device (i.e., speaker) installed and activated, the application can exit unexpectedly.
• Configuration of MxFFS archive as backup
  The following settings in the camera storage of the Configuration view of MxMC will cause an error:
  On the Storage tab, set SD Flash Card as Recording Medium on the Recording tab, set SMB/CIFS File Server as Backup Medium with the default value (=16) for the Max. Backup Size [GiB]. This setting will create an MxFFS archive with an invalid size (only 4 MB) and MxMC can crash when trying to directly access the archive. Change the setting for Max. Backup Size to avoid this situation.
• Translations
  The new features of the user interface described above are currently only available in English, German, and French.

With the exception of the two bugfixes "MxMOVE cameras and Grid Playback" as well as "RTP/RTSP via HTTPS", the same limitations as in the release 2.0.1 apply.

top

Release 2.1.0 of MxManagementCenter

Creation Date: 2019-04-12

Publishing Date: 2019-04-15

Enhancements and Improvements

Enhanced Camera Configuration

The Camera Configuration has been extended to include the following important settings:

• Users and access rights management
  The new Users & Groups tab in the Configuration allows managing users, groups and their access rights. The dialogs within this tab provide for setting all parameters concerning public access, the administrator group, any given users and groups including the corresponding access rights. Using the Configuration bar, you can easily copy these settings from this camera to many other cameras.
  Note: Configuring a Supervisor is currently not possible.
• VoIP Telephony
  The new VoIP Telephony tab provides for setting camera parameters, such as the SIP server, SIP client and inbound/outbound calls. This corresponds to the parameters of the browser-based camera dialogs in the Admin Menu > Audio and VoIP Telephony section.

"Components" View

The configuration of recording paths and cash point systems (POS) does not use the File > Settings dialog any more, but the new and more convenient Components view. This view contains the following sections:

• File Server
  Allows setting the parameters for all supported file server types (local, network share, MOBOTIX NAS, MOBOTIX NAS (ONVIF)). These settings had been located in the Recordings Paths section of the File > Settings dialog mentioned above. File servers of the MOBOTIX NAS (ONVIF) type are easily found using the new MOBOTIX NAS (ONVIF) detection feature, which also copies the most important settings into this dialog.
• Smart Data Sources
  This section replaces the previously used Retail System section in the File > Settings dialog. It allows setting the data and video sources of the integrated cash point system (POS) and has been extended with additional parameters (see next section).

Adding additional Cash Point Systems and Smart Data Sources

Using the new view Components > Smart Data Sources, you can add Vectron cash point systems as before, but also additional formats for data sources for other cash point systems or generic systems:

• HUTH:
  Similar to Vectron systems, you can now integrate HUTH cash point systems (with attached fuel pumps and car wash systems). The individual cash point transactions can be displayed live in the Smart Data bar of MxMC. Using the Smart Data Search view, you can pinpoint individual transactions to review the corresponding video recordings.
• CarReader:
  This system for number plate recognition allows browsing and displaying events with identified license plates with the corresponding video recordings.
• Custom (Smart Data Interface):
  This format can be used by system integrators to add any system to the MOBOTIX camera and MxMC. For this purpose, the system needs to implement the "Smart Data Interface" provided by MOBOTIX. To add this system to MxMC, the system is integrated as a Smart Data source via a MOBOTIX camera, similar to a cash point system. This camera receives the data according to the Smart Data Interface specification from the attached system via HTTP/HTTPS and provides the data to MxMC. Displaying and browsing the provided data in MxMC and the linking to the corresponding video recordings is very similar to the integration of an attached cash point system. The new Smart Data Interface is generic and allows integrating any given system that generates time-based data and is capable of sending these data on to MxMC for processing, e.g., other cash point systems, access control systems, fuel pumps, etc..

Other Improvements

• Showing MOBOTIX MOVE Cameras Using MxThinClient Devices
  This release allows showing attached MOBOTIX MOVE cameras with the help of an MxThinClient (just like MOBOTIX IoT cameras) on an additional monitor or TV screen with HDMI connector. Showing the camera on an MxThinClient works in the same way as for MOBOTIX IoT cameras; simply drag&drop the camera on an MxThinClient in the MxMC device bar or double-click on different spots of the image of a MOBOTIX MOVE camera.
  Notes:
  • The MxThinClient needs to run a firmware version 1.1.1.3 or higher.
  • For MOBOTIX MOVE cameras, the MxThinClient currently uses "Stream1" and port 554 defined in Streaming > Video Configuration to show an H.264 stream via RTSP. If "Stream1" of a MOVE camera uses a different codec (e.g., M-JPEG), this stream cannot be shown on an MxThinClient.

Bugfixes

• Exporting data via the camera
  If the connection to the camera failed while exporting data via the camera, (e.g., due to network problems), the export stopped at the current position and had to to be ended manually. The current release automatically detects such a connection failure and stops the export.
• Selecting a local path
  Selecting a local path as recording path for a camera in the Configuration dialog did not work as expected. The path was only accepted if it had been entered or edited manually; otherwise, an "Invalid MxFFS Path" error message occurred.
• Selecting a device folder
  Selecting a device folder for a camera in the Recording Settings section of the Configuring dialog produced an "Invalid MxFFS Path" error, if the first subfolder (in alphabetical order) in a folder had been selected.
• Export progress bar
  While exporting data, the progress bar sometimes jumped back to 0 % and it appeared as if the export had been restarted.
• Image correction for hemispheric cameras
  When displaying hemispheric camera images (Live or Playback) it sometimes happened that the slider for changing the image correction mode (Full image, Normal, Panorama, etc.) sometimes did not not show.
• Using Thermal(-TR) events
  When configuring Thermal cameras, previously defined Thermal(-TR) events could not be used for triggering actions or recordings. The corresponding event icon did not show.

Known Limitations

• VoIP/SIP client in camera configuration
  To activate the camera-internal VoIP/SIP client, you must first restart the camera after setting the corresponding option in the VoIP Telephony tab of the Configuration view and there is no indication of this.
• PTZ functions
  Using the PTZ functions of MOVE camera, especially with a joystick, can cause problems.
• Translations
  The new features of the user interface described above are currently only available in English, German, and French.

Besides the limitations above, the same limitations as for the predecessor release 2.0.1 apply.

top

Release 2.0.1 of MxManagementCenter

Creation Date: 2018-12-18

Publishing Date: 2018-12-20

Enhancements and Improvements

Enhanced Camera Configuration

The program contains the following additional settings and improvements in the camera configuration:

• Time Server
  You can easily configure the camera as a time server in the Time section.
• Recording
  Recording allows configuring the recommended Buffered MxFFS Archive method. This is done by setting Recording Medium in the Storage section to RAM Buffer and then setting a file server as Backup Medium in the Backup Storage section.
  Note: If the RAM Buffer option is not available, please press the Refresh button to correct this.
• Basic Settings
  In the basic settings, the expert mode has been removed from the Recording section.

Other Improvements

• "Full Image" View
  When using the Full Size Tool Bar option in the View menu, the program shows the tool bar at the bottom of the screen even though the application is in Full Image view. This means that many additional functions are available in this view.
• Alarm Filter
  The default setting for the alarm filter of the alarm bar has been changed to All Events.
• Remote Control
  The remote control command ".../message?..." has been secured against displaying active HTML links.

Bugfixes

• Adding MxMOVE cameras
  The Welcome assistant sometimes had issues when adding MxMOVE cameras on which the default access credentials had been changed beforehand.
• MxMOVE/ONVIF S cameras in remote environments
  If you had been running the program in a remote environment, adding MxMOVE cameras or other ONVIF cameras in MxMC (using port forwarding) did not work properly.
• RTP/RTSP via HTTPS
  The streaming of (MxMOVE) cameras did not work properly, if the settings RTP/RTSP via HTTPS was being used.
• Integrating a door station
  When integrating a MOBOTIX door station, MxMC did not register as intercom and did not notify the user when someone rang the door bell.
• Recording path and connected Windows drive
  Using a recording path on a connected network drive of a Windows system did not work properly.
• Camera Configuration in virtual operating system environments
  When trying to open the camera configuration on a virtual machine, the program sometimes closed unexpectedly.
• "Settings" dialog
  Closing the Settings dialog sometimes resulted in long wait times.
• Playback and ONVIF S cameras
  When playing back recordings of MxMOVE cameras or other ONVIF S cameras, it was possible to switch to Direct File Server Access.
• Camera Configuration
  Some fields in the Time section had issues with data input and the IP address of the currently selected time server did not display properly. In addition, this section has seen many smaller corrections.
• Focus window in the Grid
  When in Grid view, the program sometimes displayed the live image of the camera in the focus window with a gray frame.

Known Limitations

• Live Recorder and Network Drive
  When using a shared network drive to as a storage target for the Live Recorder, you may get an error message; the storage of the recorded data on that drive, however, works properly.
• Camera Search With HTTPS on Windows Machines
  On Windows computers, the Welcome assistant can either search for cameras using HTTP (default) or for those using HTTPS. It is not possible to search using both protocols at the same time. If you want to search and add cameras that are using only HTTPS, you need to change the connection type from Standard (HTTP) to SSL (HTTPS) in the context menu of the Search Cameras icon in the Add Devices dialog.
• Performance of the macOS Release
  As compared to older releases (up to V1.3), this release may display performance issues on macOS systems, especially when showing many cameras in one grid (between 15 and 70 cameras, depending on the hardware). This release can show less smooth video and slower reaction to user input earlier than the predecessor releases. If distortion correction of hemispheric images is not needed, you can switch off the OpenGL option in the MxManagementCenter > Settings > General section to circumvent this issue.
• Export of Data Via the Camera
  When exporting recordings via the camera, it may happen that the first ten seconds of the exported file show colored artefacts (exporting to AVI file) or that the video of this time range cannot be played back at all (exporting to MxPEG clip file). In addition, when exporting AVI files via the camera, the exported video did not contain the audio track even though the Audio option had been activated.
• Audio Playback
  When playing back recordings with audio, sound dropouts may occur infrequently, especially in continuous recordings. These dropouts only occur when playing back in the Playback and Grid Playback views, but not in the exported video files of the recordings. This effect only appears when directly accessing the recordings on the file server and not when playing back recordings via the camera. As a workaround, you should temporarily switch to playback via the camera to hear the sound.
• Integrated P2 cameras (M12, D12)
  P2 cameras (e.g., M12, D12), which were added manually (i.e., not via the automatic camera search), will again show up in the results of the camera search.
• MxMOVE cameras and Grid Playback
  When using MxMOVE cameras or other ONVIF S cameras in Grid Playback, using an additional Focus window is not possible since you cannot show these cameras in the Focus window and another grid tile at the same time. Furthermore, when showing many MxMOVE/ONVIF S cameras (> 10) the Grid Playback view can show gray tile.
• RTP/RTSP via HTTPS
  When setting the connection protocol to RTP/RTSP via HTTPS while manually adding MxMOVE cameras or other ONIVF S cameras, this setting will not be saved. After adding the cameras, you will need to apply this setting again in the Camera Configuration dialog. Note that when making the initial contact via this protocol, showing the live image may take several seconds.

top

Release 2.0 of MxManagementCenter

Creation Date: 2018-10-31

Publishing Date: 2018-11-02

Enhancements and Improvements

Licensing

Beginning in release 2.0, many features are being added, some of which require a license: Integration of ONVIF S cameras and H.264, Extended camera configuration, Advanced Service including Health Check. In addition, the licensing mechanism introduced in release 1.8 for POS has been extended by additional features. Different license packages are available that depend on the number of ONVIF S devices, the video codec used, the number of MxMC instances and the number of MOBOTIX devices. For more information on the available licenses and how to obtain them, please see the MOBOTIX website under Products > Software > MxManagementCenter.

Integration of MxMOVE and other ONVIF S-Based Cameras

You can now add MxMOVE cameras and other cameras that understand ONVIF S to MxMC. For these types of cameras, the Camera Configuration dialog contains the following new settings:

• Authentication
• Protocol
• Bandwidth setting HiRes
• Bandwidth setting LoRes

Currently, the following features are available for these cameras:

• Searching and integrating cameras using the Welcome Wizard.
• Displaying and modifying numerous parameters of the Camera Configuration (access data, camera name, bandwidth-dependent image profiles HiRes/LoRes, H.264/M-JPEG video codecs), frame rate, image size and image quality).
• Live image display using the Grid and Live views, including PTZ control using the H.264 or M-JPEG video codecs.
• Enlarged display of the camera image on a second monitor.
• Playing back and exporting the recordings stored on a MOBOTIX NAS (see next section).

When using M-JPEG as video codec, you can use any number of MxMOVE cameras and up to eight other ONVIF S cameras in MxMC without having to buy a license. When using the H.264 codec for MxMOVE and other ONVIF S-based cameras or when integrating more than eight ONVIF S cameras in MxMC, the corresponding licenses are required (see Licensing section above).

Integration of MOBOTIX NAS Devices

The new MOBOTIX NAS devices allow storing the H.264 streams of MxMOVE cameras and other ONVIF S cameras. Using MxMC, you can browse these recordings and play back the video. For accessing the recorded video, the application uses the ONVIF Profile G interface. To set up the entire system consisting of MxMOVE cameras and other ONVIF S cameras, a MOBOTIX NAS and MxMC, the following steps are required:

• Installing the MOBOTX NAS, including the desired hard disks using the Device Finder (from the MOBOTIX website under Support > Download Center > Software Downloads > MOBOTIX NAS)
• Setting up the storage volume and installing the special QVR Pro app
• Defining the "Recording Spaces" on the NAS device
• Integrating the ONVIF S cameras (MxMOVE and other cameras) in MxMC
• Adding the ONVIF S cameras to the NAS device and configuring the recordings on the cameras (Recording Space, limits, etc.)
• Defining the MOBOTIX NAS as a new recording path of the MOBOTIX NAS (ONVIF) type in MxMC
• Assigning the MOBOTX NAS recording path in MxMC to all ONVIF S cameras that use the NAS for recording

The QVR Pro app is available on the MOBOTIX website under Support > Download Center > Software Downloads > MOBOTIX NAS for downloading. For a more detailed description of these steps, please see the MOBOTIX website and read the Quick Install document in the Support > Download Center > Manuals section.

To access the recordings of MxMOVE cameras and other ONVIF S cameras on a MOBOTIX NAS, MxMC provides the following functions:

• Searching for a certain point in time in the recording and playing back in the Playback view – currently using single speed (real time) and without audio track.
• Searching and playing back recordings in the Grid Playback view.
• Exporting of recorded data – currently using single speed (real time) and without audio track.

Advanced Camera Configuration

Apart from the basic camera settings of release 1.8, release 2.0 now shows many additional tabs for configuring camera settings in the Configuration view (Network, Time, Hardware, Audio, Video, Events, Recording, etc.). These tabs allow accessing most of the parameters (currently about 75 %) that are only accessible using the browser interface otherwise. By using the configuration bar on the right-hand border of the MxMC window, you can apply the settings quite easily to many cameras at the same time. The configuration changes can be applied to the currently selected camera in the device tree and to all cameras of the superordinate group. Note that you can edit the configuration of up to 80 cameras at once. Using the advanced configuration requires a license (see Licensing section above).

Health Check

The Wizards & Tools view now contains the new Health Check feature. It allows testing all MOBOTIX IoT cameras of the Mx6 model range for problems regarding the system status. The test covers all cameras of the camera group currently selected in the device tree. The results are displayed with traffic light icons (Green – no problems, Yellow – at least one warning in the system, Red – at least one critical state of one camera). If warnings (Yellow) and errors (Red) have been detected, the system will propose solutions and recommendations to resolve the issues.

The Health Check feature is part of the Advanced Service License (see Licensing section above).

Online Help

In addition to the existing Quick Help, this release features an extensive online help with integrated search. To open the online help, click on Help in the menu or press Ctrl/Cmd+Alt+?.

Design of the User Interface

The user interface of the program shows numerous enhancements of buttons, graphics and icons.

Other Enhancements

• Enhanced Event Filters
  The selection of event filters has been extended by additional event types (such as Timer events, MxMessage events, Meta events). This applies to the event filters of the alarm bar and the event histogram, the alarm settings of individual cameras and the event filters of the Research view.
• Extended Action Log
  If the action log has been activated in the Settings dialog, the system is now logging these additional user actions: "Wrong Admin password entered", "Supervisor password modified", "Playback in the Live view, Grid-Playback or Playback view started".
• Camera-Specific Bandwidth Settings
  Depending on the available bandwidth of the connection, you can instruct each camera to use a HiRes or a LoRes connection. The Camera Configuration dialog has been extended by the Bandwidth Settings entry, which allows setting different frame rates, image sizes and image qualities for HiRes and LoRes.
• Bandwidth Settings in the Grid
  Another tool for limiting the bandwidth applies to the Group Configuration. Here, you can set a maximum frame rate and a maximum image size for the grid tiles.
• Export Using the Remote Control
  The existing parameter 'export' in the MxMC remote control has been extended by additional parameters, which allow exporting a specific time range by using a remote control command (please see the remote control help page in the browser <IP address>:<Port>/help).

Bugfixes

• Display of distortion-corrected images on some devices
  On some devices, such as the Surface Pro, the display of distortion-corrected images of hemispheric cameras sometimes caused scaling issues.
• Multi-functional sliders and Quick Help
  The multi-functional slider fro subsequent distortion correction of hemispheric images in MxMC did not have a Quick Help entry.
• Camera display in the Graphics view
  When displaying a camera live image by clicking on the camera icon in the Graphics view, the camera icon sometimes did not display properly and did not work.
• "Mailbox Messages" filter in the event histogram
  The histogram for displaying the distribution of events over time remained empty when setting the Mailbox Messages filter and did not show any door station messages.
• Bell events and weekly profiles
  Alarms based on door station bell events for specific time ranges that had been defined in a weekly profile did not work properly and sometimes triggered outside of the specified time ranges.

Known Limitations

• Live Recorder and Network Drive
  When using a shared network drive to as a storage target for the Live Recorder, you may get an error message; the storage of the recorded data on that drive, however, works properly.
• Camera Search With HTTPS on Windows Machines
  On Windows computers, the Welcome assistant can either search for cameras using HTTP (default) or for those using HTTPS. It is not possible to search using both protocols at the same time. If you want to search and add cameras that are using only HTTPS, you need to change the connection type from Standard (HTTP) to SSL (HTTPS) in the context menu of the Search Cameras icon in the Add Devices dialog.
• Performance of the macOS Release
  As compared to older releases (up to V1.3), this release may display performance issues on macOS systems, especially when showing many cameras in one grid (between 15 and 70 cameras, depending on the hardware). This release can show less smooth video and slower reaction to user input earlier than the predecessor releases. If distortion correction of hemispheric images is not needed, you can switch off the OpenGL option in the MxManagementCenter > Settings > General section to circumvent this issue.
• Export of Data Via the Camera
  When exporting recordings via the camera, it may happen that the first ten seconds of the exported file show colored artefacts (exporting to AVI file) or that the video of this time range cannot be played back at all (exporting to MxPEG clip file). When exporting AVI files via the camera, the exported video does not contain the audio track even though the Audio option had been activated.
• Audio Playback
  When playing back recordings with audio, sound dropouts may occur infrequently, especially in continuous recordings. These dropouts only occur when playing back in the Playback and Grid Playback views, but not in the exported video files of the recordings. This effect only appears when directly accessing the recordings on the file server and not when playing back recordings via the camera. As a workaround, you should temporarily switch to playback via the camera to hear the sound.
• Integrated P2 cameras (M12, D12)
  P2 cameras (e.g., M12, D12), which were added manually (i.e., not via the automatic camera search), will again show up in the results of the camera search.
• MxMove Cameras and Grid Playback
  When using MxMOVE cameras or other ONVIF S cameras in the Grid Playback, you cannot use an additional focus window, since these cameras cannot be displayed in a grid tile and a focus window at the same time. When using many MxMOVE/ONVIF S cameras in Grid Playback (> 10), the application may display gray tiles.
• Integrating door stations
  When integrating a MOBOTIX door station, MxMC currently does not register as intercom and does not notify the user when someone rings the door bell.

top

Release 1.8.1 of MxManagementCenter

Creation Date: 2018-08-13

Publishing Date: 2018-08-15

Please note that for MxManagementCenter 1.8.1, the same Important Usage Notes apply as for the predecessor release MxManagementCenter 1.8.

This release only contains the error correction measures listed under Bugfixes. All other features and restrictions have not changed.

Bugfixes

• Configuration of cameras with software MX-V5.1.0.99.r3
  The functionality of the new Configuration view in MxManagementCenter did not work properly for cameras running software MX-V5.1.0.99.r3. When trying to load the settings of such a camera, an error message appeared.

top

Release 1.8 of MxManagementCenter

Creation Date: 2018-06-15

Publishing Date: 2018-06-15

Enhancements and Improvements

New Configuration view to configure the basic camera settings

With the new Configuration view, the most important settings of cameras can be changed within 5 different tabs (General, Network, Time, Image and Recording).
Where:

• Only cameras with firmware version 5.1.0.x or higher (for Mx6 models) or 4.6.0.x or higher for (x4 / x5 models) can be configured.
• The configuration refers to the camera currently selected in the device tree and all cameras of the higher-level group. A maximum of 80 cameras can be configured at the same time.

New Assistant to secure cameras

In the Wizards & Tools view there is now the new wizard function Secure System. By activating this function, a camera selected in the device tree or the cameras of a selected group are first checked for various security-relevant settings (access data, encryption and public access). If necessary, the corresponding settings can then be changed and the system can be secured.

Other Improvements

• Permission for Snapshot function
  Executing the Snapshot function has been linked to the export permission of a user and is therefore no longer available without this permission.
• Remote Control Extensions
  The interface for remote control of the MxMC has been extended by two parameters:
• The parameter 'speaker'can be used for automatic audio output when viewing a camera.
• With the additional parameter 'monitor = <MonitorNumber>', some views (eg Live, Grid) can now also be remotely displayed on a separate screen other than the main monitor of the system (see the help page of the remote control).
  Example: http://<ip>: 57536/show? Camera=MyCam&live&monitor=3
• Low-res mode
  Bandwidth mode LowRes can now be used with less than 1 frame/second (for live image display at low bandwidths).
• Improvements to the Quick Help
  The quick help for the function icon Bell Settings in the Live-View has been modified and it now better describes the effects of a deactivated bell on the door station. In addition, in graphic views that contain live image tiles, there is now a quick-help icon Live Image. The associated quick help now explains more exactly the behavior of the integrated instant playback.
• Element Names Within the Graphic View
  The Graphic view can now display the internal element names (such as the name of a camera). To do so, activate the edit mode of the Graphic view, right-click on an element to open its context menu and select the Show Name option.
• Alarm Comments
  If the action protocol has been activated in the application, you can now add a comment anyplace where you can acknowledge alerts. To do so, right-click an entry and select Confirm and Comment from the context menu; the alarm comment will be added to the action protocol.
• Event Image Cache
  In the Settings dialog, the Cache section contains the new Event Images Harddisk Cache option. If this option is activated (factory default), the application loads the event images shown in the Alarm bar or in the Research view from the cache after restarting the application, without having to reload the files from the individual cameras. This improves the performance of the application after starting the program.

Bugfixes

• Remote control command ‚fullview‘ with single cameras
  When viewing a single camera remotely, the parameter 'fullview' (combination of 'fullsize' and 'fullscreen') did not work properly.
• PTZ functions for Axis PTZ cameras
  The PTZ control did not work for Axis PTZ cameras.
• Changing grid tiles in mode Manual Mode
  When editing grids in "manual mode", the vertical scaling of grid tiles could cause the affected tile to be scaled too large.
• Alarm setting of cameras
  After opening the Camera Configuration dialog, the Alarms option was always on - regardless of the last setting made.
• Camera live view in LowRes bandwidth Mode
  When displaying the live camera image in the LowRes bandwidth mode, resizing the display area (for example, by collapsing the group bar) resulted in display errors.
• Connection to MxThinClient on multiple networks
  If multiple networks were defined on the MxManagementCenter Windows PC for a network adapter, connecting an MxThinClient via the MxMessage system did not work.
• Russian Translation
  When the program language was set to Russian, there were some incorrect texts in the user interface.
• Research View as Default
  Using the Research View as the default view of a camera or group had not worked reliably.
• Post video motion analysis on Windows 7 machines
  When configuring the post video motion analysis on Windows 7 machines, it was not possible to close the additional window for defining the analysis area.
• AVI Export
  For the AVI export a maximum of 2Gbyte can now be selected as maximum export file size.

Known Limitations

• Live Recorder and Network Drive
  When using a shared network drive to as a storage target for the Live Recorder, you may get an error message; the storage of the recorded data on that drive, however, works properly.
• Camera Search With HTTPS on Windows Machines
  On Windows computers, the Welcome assistant can either search for cameras using HTTP (default) or for those using HTTPS. It is not possible to search using both protocols at the same time. If you want to search and add cameras that are using only HTTPS, you need to change the connection type from Standard (HTTP) to SSL (HTTPS) in the context menu of the Search Cameras icon in the Add Devices dialog.
• Performance of the macOS Release
  As compared to older releases (up to V1.3), this release may display performance issues on macOS systems, especially when showing many cameras in one grid (between 15 and 70 cameras, depending on the hardware). This release can show less smooth video and slower reaction to user input earlier than the predecessor releases. If distortion correction of hemispheric images is not needed, you can switch off the OpenGL option in the MxManagementCenter > Settings > General section to circumvent this issue.
• Export of Data Via the Camera
  When exporting recordings via the camera, it may happen that the first ten seconds of the exported file show colored artefacts (exporting to AVI file) or that the video of this time range cannot be played back at all (exporting to MxPEG clip file). When exporting via the camera to AVI files the result files also don't have audio though the Audio option may have been selected.
• Audio Playback
  When playing back recordings with audio, sound dropouts may occur infrequently, especially in continuous recordings. These dropouts only occur when playing back in the Playback and Grid Playback views, but not in the exported video files of the recordings. This effect only appears when directly accessing the recordings on the file server and not when playing back recordings via the camera. As a workaround, you should temporarily switch to playback via the camera to hear the sound.
• "Mailbox Messages" filter
  If the Mailbox Messages filter has been set, the histogram, which shows the distribution of events over time, currently stays empty and does not show any door station messages.
• Integrated P2 cameras (M12, D12)
  P2 cameras (e.g., M12, D12), which were added manually (i.e., not via the automatic camera search), will again show up in the results of the camera search.

top

Release 1.7 of MxManagementCenter

Creation Date: 2018-02-14

Publishing Date: 2018-02-14

Enhancements and Improvements

Integration of Cash Point Systems (POS)

From this version on, you can display and search the transaction data of Vectron cash point systems (POS = point of sale) together with the corresponding video recordings of a MOBOTIX camera in MxManagementCenter. For this purpose, MxMC now has a new Retail bar that can be pulled out of the right-hand border of the program window. This bar shows the current transaction data of a specific cash point on a continuous basis. It also allows playing back the video recordings associated with individual transactions. In addition, you can use the new Retail view to search the transaction data of the integrated cash points according to different criteria. Moreover, you can show the transactions of the search results individually or together with the data of the entire sales receipt for easy access to the corresponding video recordings.

To set up such a POS system, you basically need to follow these steps:

• A special script for MOBOTIX needs to be installed and configured on the Vectron cash point. The cash point is then associated with a MOBOTIX camera (Mx6 model with firmware V5.0.2 or higher), which stores the transaction data of the cash point.
• In MxMC, you need to add the cash point with its name and an identifier for displaying the data. Next, you need to assign the camera associated with the cash point as a "data source" for retrieving the transaction data. In addition, you need to assign a camera to the cash point that stores the corresponding video recordings for the transactions. This can be the same camera as the data source or a different one. To configure the POS system in MxMC, open the Settings dialog and the Retail System section.
• On the MOBOTIX camera used as a data source, you need to activate the POS integration and enter the name of the cash point.

Note: The new views and configuration options for setting up a POS system in MxMC are only available once you have activated the appropriate license in the application (see next section).

Licensing

Industry-specific solutions and special features – such as settings up a POS system described above – require a license in MxMC. To activate the licenses in this release of MxMC, open the Windows menu and select Licenses to open this new dialog. After you have purchased the licenses from a MOBOTIX partner, you can use the activation codes to activate the corresponding licenses. The licenses activated in this way are valid for the MxManagementCenter on the current computer. Once you have activated the licenses and restarted the application, the licensed features are available.

Integration of MxThinClient

MxThinClient devices with a firmware V1.1.0.3 and higher can now be integrated into MxManagementCenter. You can use an MxThinClient thus integrated to show live streams of cameras on a monitor or TV connected to the MxThinClient via HDMI. You can add MxThinClient devices as a separate type in the device bar of MxMC; these devices are managed in the new MxThinClient Devices section of the bar.

The communication between MxMC and an MxThinClient device uses the MxMessageSystem. Besides setting up the MxThinClient in the device tree of MxMC, you also need to configure the MxMessageSystem in MxMC accordingly. To configure the MxMessageSystem, open the Settings dialog and the MxMessageSystem section. Make sure that you are using exactly the same settings for Broadcast Port and Passphrase as in the MxThinClient device. It is also required that the MxMC computer and the MxThinClient are using the same time server to stay in sync. This is a prerequisite for successful operation of the MxMessageSystem.

Recording Paths and Device Tree

• It is now possible to add the file paths to the camera recordings on a NAS or file server directly using the CIFS protocol, i.e., MxMC does not need the camera any more to access the video and audio data for playback, searching and exporting. To define such a recording path, you simply add a new device of the Recording type to the device tree. All recordings added in this manner are listed in the device tree in the Clips & Recordings section, together with any MxPEG clips.
• You can now structure the Clips & Recordings section of the device tree using folders and subfolders, just as in the camera section.

Exporting MxPEG clips

This release can export MxPEG clips you added to the program before in parts or as a whole, just like any other recording.

Live Recorder

In the Live and Grid views, the command bar now has a new Recorder function icon. If you click on this icon, MxMC records the live stream of the camera shown in the Live view or in the focus window of the Grid view as MxPEG clip file. In the Settings dialog, the new Live Recorder section contains the settings for the storage location of the MxPEG clip files and the maximum duration of the live recording.

Other Improvements

• MXU Export/Import
  The File menu contains two new entries: Export MXU and Import MXU. The MXU export creates a text file that contains all camera and group definitions currently integrated in the program. Such a text file can be adjusted or expanded manually in a text editor or by other programs. If you import such an MXU file into a different MxMC installation, you can quickly add the cameras and groups in the file to the installation.
• Simplified Data Export
  If you start a data export in the Playback view without setting a time range, you can now set a time range just before actually exporting the data.
• User Login
  You can now set specific times for individual users, during which they are allowed to login at MxMC.
• Element Names Within the Graphic View
  The Graphic view can now display the internal element names (such as the name of a camera). To do so, activate the edit mode of the Graphic view, right-click on an element to open its context menu and select the Show Name option.
• Alarm Comments
  If the action protocol has been activated in the application, you can now add a comment anyplace where you can acknowledge alerts. To do so, right-click an entry and select Confirm and Comment from the context menu; the alarm comment will be added to the action protocol.
• Event Image Cache
  In the Settings dialog, the Cache section contains the new Event Images Harddisk Cache option. If this option is activated (factory default), the application loads the event images shown in the Alarm bar or in the Research view from the cache after restarting the application, without having to reload the files from the individual cameras. This improves the performance of the application after starting the program.

Bugfixes

• Research View
  Instead of showing the events of all cameras, the Research view sometimes only showed the events of one camera.
• Graphic View
  When executing the Undo command in the Graphic view with overlapping cameras, the program sometimes crashed.

Known Limitations

• Live Recorder and Network Drive
  When using a shared network drive to as a storage target for the Live Recorder, you may get an error message; the storage of the recorded data on that drive, however, works properly.
• Camera Search With HTTPS on Windows Machines
  On Windows computers, the Welcome assistant can either search for cameras using HTTP (default) or for those using HTTPS. It is not possible to search using both protocols at the same time. If you want to search and add cameras that are using only HTTPS, you need to change the connection type from Standard (HTTP) to SSL (HTTPS) in the context menu of the Search Cameras icon in the Add Devices dialog.
• Performance of the macOS Release
  As compared to older releases (up to V1.3), this release may display performance issues on macOS systems, especially when showing many cameras in one grid (between 15 and 70 cameras, depending on the hardware). This release can show less smooth video and slower reaction to user input earlier than the predecessor releases. If distortion correction of hemispheric images is not needed, you can switch off the OpenGL option in the MxManagementCenter > Settings > General section to circumvent this issue.
• Export of Data Via the Camera
  When exporting recordings via the camera, it may happen that the first ten seconds of the exported file show colored artefacts (exporting to AVI file) or that the video of this time range cannot be played back at all (exporting to MxPEG clip file). In addition, Mx6 cameras with a firmware of V5.0.2.x and higher sometimes show a progress bar when exporting that jumps from 0 % directly to 100 %. Exporting time ranges that have gaps between recordings (e.g., when using event recording) may fail with an "Empty clip range" error message.
• Audio Playback
  When playing back recordings with audio, sound dropouts may occur infrequently, especially in continuous recordings. These dropouts only occur when playing back in the Playback and Grid Playback views, but not in the exported video files of the recordings. This effect only appears when directly accessing the recordings on the file server and not when playing back recordings via the camera. As a workaround, you should temporarily switch to playback via the camera to hear the sound.
• "Mailbox Messages" filter
  If the Mailbox Messages filter has been set, the histogram, which shows the distribution of events over time, currently stays empty and does not show any door station messages.
• Integrated P2 cameras (M12, D12)
  P2 cameras (e.g., M12, D12), which were added manually (i.e., not via the automatic camera search), will again show up in the results of the camera search.

top

Release 1.5 of MxManagementCenter

Creation Date: 2017-07-27

Publishing Date: 2017-07-31

Enhancements and Improvements

Multi-Camera Configuration

The edit mode of the device bar now allows selecting several cameras at once (using [Shift]-click or [Ctrl]-click) and right-click to open the new Multi-Camera Configuration dialog. This dialog also allows setting the most important properties for all selected cameras at once, such as the camera access data (user name and password) or the recording path.

"Active" Camera Property

By default, the "Active" property of the Camera Configuration dialog has been disabled to reduce the system load in large projects with many cameras. In addition, this property has been renamed Background Alarms. As in previous releases, activating this option will keep a permanent connection to the cameras that are currently not displayed or whose storage is not accessed. This permanent connection is used to get information about camera events to create MxMC alarms.

Performance on Large Project Data

The system behavior and the response times when working with large project data (several hundred cameras) has been improved. This is most noticeable when using the device bar on the left-hand side of the application window, e.g., when switching grids.

Bugfixes

• Audio when exporting data via the camera:
  Although the Audio option had been activated, the exported file (.AVI or .MXG) sometimes did not contain any audio data.
• Integrated P2 cameras (M12, D12)
  After minimizing the MxMC application window and restoring the window size, live streams of P2 cameras did not run any more. Even clicking on the Update icon in the upper control bar did not help to restore the streams.
• Switching between grids with inactive and/or unreachable cameras
  When switching grids that contained only "inactive" or unreachable cameras, the application sometimes froze.
• Focus window after loading project data
  When loading existing project data from older program releases with MxManagementCenter 1.4, the focus window of a grid sometimes did not show.
• Problems Accessing an MxFFS Card
  When accessing faulty MxFFS archives (writing problems due to a full volume on the server), the application had issues.
• Drag&drop of groups
  When trying to display a camera group in Grid view by dragging a group from the group bar to the Grid view, the group was only displayed properly, when dropping the group onto the focus window of the grid.
• Action icons in Graphic views
  The first click onto an action icon in a Graphic view showed the view as a full image instead of executing the defined action.
• Hyperlinks with unknown certificates and display of results
  When executing https/TLS links to cameras with an unknown certificate, this certificate could not be trusted. As a consequence, a result window (if defined) would remain empty.
• Home icon with missing Home view
  If no Home view had been defined, clicking on the Home icon in bottom left corner of the application window sometimes made the control bars at the upper and lower borders of the application window disappear.
• Help icon in the action log preview
  On Windows computers, the dialog with the print preview of the action protocol contained a help icon in the title bar without function.

Known Limitations

• Search for Cameras with HTTPS under Windows
  The camera search in the Welcome Wizard under Windows shows only cameras that can be connected via HTTP (= standard) or via HTTPS. A search using both protocols at the same time is not possible. So, in order to search and integrate cameras with exclusively HTTPS enabled, the connection type must be explicitly switched from Standard (= HTTP) to SSL (= HTTPS) in the context menu of the Search Cameras icon in the Add Devices dialog.
• Performance of Mac OS X Version
  As compared to the predecessor release 1.3, this release may display performance issues on Mac OS X systems, especially when showing many cameras in one grid (between 15 and 70 cameras, depending on the hardware). Release 1.5 can show less smooth video and slower reaction to user input earlier than the predecessor release. If distortion correction of hemispheric images is not needed, you can switch off the OpenGL option in the MxManagementCenter > Settings > General section to circumvent this issue.
• Export of Data Via the Camera
  When exporting recordings via the camera, it may happen that at max. the first ten seconds of the exported file show colored artifacts (exporting to AVI file) or that the video of this time range cannot be played back at all (exporting to MxPEG clip file).
• Audio Playback
  When playing back recordings with audio, sound dropouts may occur infrequently, especially in continuous recordings. These dropouts only occur when playing back in the Playback and Grid Playback views, but not in the exported video files of the recordings.
• "Mailbox Messages" filter
  If the Mailbox Messages filter has been set, the histogram, which shows the distribution of events over time, currently stays empty and does not show any door station messages.
• Integrated P2 cameras (M12, D12)
  P2 cameras (e.g., M12, D12), which were added manually (i.e., not via the automatic camera search), will again show up in the results of the camera search.
• Translations
  The labels in the new dialog Multi-Camera Configuration are currently available only in German, English and French language. If a different language is selected these labels are displayed in English. The same applies to the option Background Alarms.

top

Release 1.4 of MxManagementCenter

Creation Date: 2017-04-27

Publishing Date: 2017-04-28

Enhancements and Improvements

Device Bar With Extended Tree Structure for Camera Groups (Nested Groups)

Starting with MxMC 1.3, you had the option to show a device bar on the left-hand side of the window border. The displayed tree structure provides a structured overview, quick selection of elements and simplified management of the video sources. With MxMC 1.4, you can now create a tree structure with several group levels (i.e., with groups and subgroups). Distributing the cameras onto any number of nested subgroups will help to create an easily navigable tree structure even in large installations with many cameras. When using descriptive names for cameras and groups will allow the users to easily find specific cameras. To create a structure with subgroups, make sure that the lock icon is open, then drag&drop the desired cameras.

In addition, the width of the device bar can now be adjusted within a preset range.

New Features and Controls for Configuring the Grid View

To display and arrange the individual cameras of a group in the Grid and Grid Playback views, you can use several options, such as the number of cameras to be displayed, the format of the grid tiles and the scaling of the focus window.

MxMC 1.4 adds two more options to set the grid layout:

• Freezable Auto Grid
  This option allows freezing the layout in the Auto Grid based on the current window size of MxMC and applying the same grid layout to any other window size. When changing the size of the window, all tiles of the grid are scaled accordingly.
• Manual Grid
  This mode allows to position and resize every tile of the group's grid (including the focus window) based on the selected base grid (4:3, 16:9, 8:3).

  When scaling, the tiles are scaled vertically and horizontally using multiples of the base grid tiles. As opposed to the automatic grid mode of the previous release, you can now mix different image formats within a group. When using a base grid of 4:3, for example, tiles can be added that have a format of 4:3, 8:3, 16:3, 4:6, etc. When using a base grid of 16:9, you can create tiles with a format of 16:9, 32:9 or 16:18.

  If space runs out when moving or resizing a tile (e.g., because there already is a tile at that position), MxMC automatically reduces the absolute size of the tiles. By adding rows and columns, the program provides more space to show the tile at the desired position.

  The tile layout designed in this manner is automatically frozen for any window size, i.e., in contrast to the previously used automatic grid adjustment, the grid layout will not change when resizing the window.

To set the grid type (Auto/Manual) and freeze the Auto Grid, make sure that the lock icon is open. Starting with MxMC 1.4, all controls for these tasks have moved from the group bar and the Group Configuration dialog to the control bar in the bottom right corner. Make sure that the window is wide enough to see these controls; if the window is too small, the controls may be hidden from view.

Per-User Settings Stored in Last MxMC Session

By default, the program looks will be the same as when you closed the program the last time. This applies to the views, selected camera group, opened sidebars and sizes as well as window positions of the program. In MxMC 1.4, this has been extended to a per-user setting of the settings. If several users are working at the same computer and login (e.g., several security persons working in shifts), every user will get the same view as when he/she logged out the last time. It is thus unnecessary to manually adjust the program settings after switching users.

User Management With Extended Security Options

In the user management dialog (opened using the button in the top left corner of the program's header bar), the section for entering the user password has been expanded by options to enhance data security:

1. Password expiration
   You can set the password to expire – never, after one or two weeks or after one, three or six months. After that, the user will have to create a new user password at the next login.
2. Prompt user to enter a new password at next login
   You can force a new user to change the standard user credentials and to apply the new extended security settings. This is done by setting an option for new users to change the password upon their first login.
3. Force higher password complexity
   The third new security feature applies to the complexity of the password. Using this option, you can force the user to define a password that follows these requirements:
   • At least eight character in length.
   • At least one digit, one upper-case, one lower-case letter and one special character.
   • The password is not identical with one of the last thirteen passwords of this user.

   As soon as the password complexity requirements have been fulfilled, the frame around the text field changes from red to green.

Improved Format for Project Data

Starting with MxMC 1.4, the project data are stored in a different format (data covers, cameras, groups, etc., but not the user-sepcific settings, such as window positions, etc.). This change has resulted in better performance when loading project data and has also resolved other problems in the same area. Project files created via the File > Save Project as menu command now have the .interchange file name extension instead of .configuration.

The following applies to existing MxMC installations and the corresponding project data:

• Upon launching MxMC 1.4 for the first time, existing project data are automatically converted to the new format.
• When starting the next time, MxMC 1.4 only uses the new project data. Any changes in the program are stored only in the new project file, not the old one.
• When starting the old program version, the changes applied in MxMC 1.4 will not be present. Vice versa, changes applied in the old version will be shown in the MxMC 1.4 installation.

Other Improvements

• Alarm Images in Grid View
  After dragging an alarm image from the alarm bar into the focus window of a Grid view, the program shows the selected alarm image as Instant Playback in the focus window.
• Monitoring Settings
  In the Monitoring section of the File > MxManagementCenter > Preferences dialog, you can now activate and deactivate the action log and you can activate the archiving of the log at regular intervals. Note that when creating new projects in MxMC 1.4, the action log is disabled by default. In addition, the options for creating the automatic snapshot images.
• Additional Remote Control Commands
  For remote-controlling the program, the following new commands have been added:
  • http[s]://<ip>:<port>/message?text=<TEXT>
    Shows a blue dialog box with <TEXT>.
  • http[s]://<ip>:<port>/alarm?text=<TEXT>
    Shows a red dialog box with <TEXT>.
  • http[s]://<ip>:<port>/alarm?ip=<camera (IP address or name)>
    Shows a red camera alarm window with the live stream of the camera. If activated, plays back the selected alarm sound.
  • http[s]://<ip>:<port>/sound
    Plays back the selected alarm sound.
  • http[s]://<ip>:<port>/sound[?name=<name>][&volume=<percent>&duration=<seconds>]
    Plays back the specified alarm sound using the volume and duration.
  • http[s]://<ip>:<port>/alarm?ip=<camera (IP address or name))>&sound=<sound file>
    Shows a red camera alarm window and plays back the specified alarm sound.

  For more information, please enter http[s]://<ip>:<port>/help.

• Bandwidth Modes
  The Audio Only bandwidth mode has been removed. For cameras that had been set to use this option, the setting HiRes will be used.
• Notifications
  The settings for notifications upon incoming alarms and bell events have been moved from the context menus of the two corresponding icons in the live view to the new Notifications section in the File > Settings dialog.
• Camera and Group Names in Remote Control Commands
  When using remote control commands to show cameras or groups, only Latin characters (ISO-8859-1) could be used for camera and group names. From this release onward, you can use any UTF-8 character, meaning full support of all known languages.
• Supervisor
  If a supervisor login is required for specific purposes (e.g., video search), you can now set an inactivity timer. Once this timer expires, the supervisor will be logged off automatically. The logout will not be performed after the specified (fixed) timespan. For this purpose, the User Management > Supervisor Configuration dialog has the new Timeout option. Before the time runs out, the supervisor can extend the timespan.
• Displaying Grids for Alarms
  For alarm images of the alarm bar, you can now quickly open the grid that shows the triggering camera. Simply double-click on the grid icon that is shown above the alarm images. If the camera is contained in more than one grid, you can select the grid to show. If more that one external monitor is attached, you can also select the monitor to use.

Bugfixes

• Alarm Sound
  After receiving many alarms, the program sometimes did not play the alarm sound any more. If that happened, it was also neither possible to change the alarm sound in the settings nor to play it back.
• Info View and Hyperlinks
  It was possible (but not intended) to add hyperlinks to the Info view, but it was not possible to delete them afterwards. This is not possible any more.
• Import of INI Files From MxCC Installations
  When importing INI files with a hierarchical layout structure from MxControlCenter, the program sometimes did not import all layouts and cameras.
• Automatic User Login
  The Auto Login feature that can be set for a specific MxMC user and that automatically logs in that user, sometimes did not work.
• Contents of Stored Projects
  When saving projects using File > Save Project as in the menu sometimes did not save all current project data (e.g., recently added cameras).
  In addition, the program sometimes showed issues with existing user data and users that tried to use these data for logging in.
• AVI Export With PTZ
  When exporting recordings to AVI files, the program sometimes exported the wrong areas if PTZ had been activated.
• Changing Grids (Using Remote Control Commands)
  When frequently switching between grids (e.g., by cameras that used remote control commands to bring their grid to the front), the program developed higher memory requirements and erroneous behavior if it had been running for a longer period of time.

Known Limitations

• Performance of Mac OS X Version
  As compared to the predecessor release 1.3, release 1.4 may display performance issues on Mac OS X systems, especially when showing many cameras in one grid (between 15 and 70 cameras, depending on the hardware). Release 1.4 can show less smooth video and slower reaction to user input earlier than the predecessor release. If distortion correction of hemispheric images is not needed, you can switch off the OpenGL option in the MxManagementCenter > Settings > General section to circumvent this issue.
• Export of Data Via the Camera
  When exporting recordings via the camera, it may happen that at max. the first ten seconds of the exported file show colored artefacts (exporting to AVI file) or that the video of this time range cannot be played back at all (exporting to MxPEG clip file). In addition, the video stream may sometimes not include the audio channel (.AVI or .MXG) although the Audio option had been activated.
• Loading Project Data
  On rare occasions, when loading project data from an earlier version in release 1.4, the focus window of a grid may disappear.
• Audio Playback
  When playing back recordings with audio, sound dropouts may occur infrequently, especially in continuous recordings. These dropouts only occur when playing back in the Playback and Grid Playback views, but not in the exported video files of the recordings.
• "Mailbox Messages" filter
  If the Mailbox Messages filter has been set, the histogram, which shows the distribution of events over time, currently stays empty and does not show any door station messages.
• Integrated P2 cameras (M12, D12)
  P2 cameras (e.g., M12, D12), which were added manually (i.e., not via the automatic camera search), will again show up in the results of the camera search.

top

Release 1.3 of MxManagementCenter

Creation Date: 2016-11-11

Publishing Date: 2016-11-14

Enhancements and Improvements

Tree Structure of Integrated Cameras, Groups and Clips for Administration and Navigation

Starting with MxMC 1.3, you can show a device bar on the left-hand side of the window border. The displayed tree structure provides a structured overview, quick selection of elements and simplified management of the video sources.

The device bar serves the purpose of main navigation and information tool (as an alternative to the camera and group bar) and it is very helpful especially when handling a larger number of cameras and groups. It can be used to accomplish the following tasks (among other things):

• Add new video sources to the system, then use drag&drop to add them to groups.
• Delete video sources from groups or from the system.
• Configure video sources (using the Camera Configuration popover.
• Change the order of the video sources within the groups.
• Switch between the different views for the groups.
• Select cameras or clips for showing them in the Live and Playback views.

The device bar has two different modes: a selection mode for selecting cameras, clips, groups, and the views as well as an edit mode for changing the properties of cameras and groups. Note that the new device bar also replaces the camera management that had been accessible from the Live view. The Camera Management icon has been removed from the control bar in this view.

Other Improvements

• Export into individual files
  When exporting several different segments of recorded video at the same time using the export list, you can now choose to export all ranges into one video file or into individual files, one for every segment of recorded video. For this purpose, the Export Profile dialog for choosing all export-related settings has the new Split Clips option.
• Additional camera status information
  Both, the camera bar and the new device bar can show two additional icons for indicating special camera statuses:
  • Limited Functionality: Indicates that this camera is running a firmware lower than 4.0 and that the program can only show the live image and the recordings using direct file server access.
  • Missing camera administrator password: Indicates that this camera has been integrated via public access and therefore does not support all MxMC features.
  Both icons are also described in the Quick Help of the application.
• Definition of the program look (header and control bars)
  Both the Header Bar at the upper window border and the Control Bar at the bottom of the application can now be hidden from view, if required. In the View menu, the new Header Bar and Control Bar entries have been added for this purpose. In addition, you can now customize these two bars in the User Configuration dialog of the Application Handling entry.
• Favorites of Cameras and Groups
  If the edit mode is active for the device bar, you can activate the star icon for individual cameras and groups if you want to use them as "favorites". To show only the favorites in the camera bar, the Filter Cameras slider now has a new Favorites setting. The group bar now has the Filter Groups slider to show all groups or only the favorites.
• Filtering the alarm bar
  Using the Alarm Filter slider, you can now show either all events or only the alarms that have not yet been acknowledged.
• Hyperlink enhancements
  
  • After executing a hyperlink, the program briefly shows the corresponding icon in the image.
  • It is now possible to define hyperlinks that are specific to groups.
  • HTTPS requests and web severs that require HTTP digest authentication are now supported.

Bugfixes

• Post Video Motion Detection (Post VM)
  When playing back recordings from the camera, Post VM detection did not work on time ranges that had been played back previously, immediately before the current playback (forward or backward).
• AVI export by the camera
  When exporting a recording with gaps as an AVI file from the camera, these gaps showed as time ranges without movement in the AVI file. These time gaps have been eliminated when using camera software release V4.4.1 or higher.
• Network shares on Mac OS X machines
  When importing a project file that had been saved from MxMC V1.1.1 into MxMC 1.2 running on Mac OS X, the network shares defined in the project data were invalid and had to be defined from scratch.
• Export improvements
  When exporting some recordings, the export sometimes did not finish properly.
• Access information for P2 cameras
  After adding P2 camera models (e.g., M12, D12) using the Welcome Assistant, the system sometimes did not remember the access information upon the next start of the application.

Known Limitations

• Audio Playback
  When playing back recordings with audio, sound dropouts may occur infrequently, especially in continuous recordings. These dropouts only occur when playing back in the Playback and Grid Playback views, but not in the exported video files of the recordings.
• "Mailbox Messages" filter
  If the Mailbox Messages filter has been set, the new histogram, which shows the distribution of events over time, currently stays empty and does not show any door station messages.
• Integrated P2 cameras (M12, D12)
  P2 cameras (e.g., M12, D12), which were added manually (i.e., not via the automatic camera search), will again show up in the results of the camera search.
• "Fullscreen" display on Windows machines
  If a hemispheric camera has been displayed as Panorama image or a similar view with distortion correction in Fullscreen mode by MxMC on a Windows machine, this mode does not allow using the menu any more. If this happens, close the Fullscreen display mode by pressing either [ESC] or [F11].
• Configuration changes after switching users
  After switching to a different user without restarting the program, configuration changes since the last program start (i.e., creating a new group) may get lost.
• Translations
  The texts of the graphic user interface and the program Quick Help that belong to the new features of release 1.3 are currently only available in English and German. When switching to a different language, these texts are displayed in English.

top

Release 1.2 of MxManagementCenter

Creation Date: 2016-06-21

Publishing Date: 2016-06-27

Enhancements and Improvements

Event Histogram

You can now activate a histogram at the left-hand side of the Playback and Grid Playback views. This histogram shows the frequency distribution of the selected events and cameras/groups within the selected time span. By default, the histogram shows all event types of the current camera or the camera in the focus window (when in the Grid Playback view). Using the sliders at the right-hand border of the histogram, you can select the event types and the cameras that will be examined. The three icons at the bottom right of the histogram allow selecting the display precision, the examined time span and setting a filter for the recorded events. The histogram hence provides a quick overview on how many and which events occurred on one or more cameras. In addition, you can quickly re-position the cursor for examining the times where many events occurred: Simply click into the histogram area to find the recordings closest to that point in time.

Export Enhancements

• Export List
  The new export bar allows compiling an export list that can comprise more than just one recording of a camera. Such an export list consists of a collection of time ranges in the recordings of one or more cameras. These recordings will then be exported in the same order in which they appear in the export list into one or more video files. To collect video clips for exporting in an export list, the alarm bar is used in the Playback, Grid Playback and Research views. Simply click on the bottom border of the alarm bar to turn it into the Export bar. To add a video clip to the export bar, drag an image into the export bar and the corresponding time range is added automatically. Another way to switch an active alarm bar to the Export bar is to drag an image into the bar, thus adding the corresponding time range to the export list. Using the icons above the images on the export bar, you can easily control the export settings, i.e., include or exclude audio and the current PTZ settings of the playback in the exported video. In addition, you can further refine the time ranges of the video clips by right-clicking the images in the export bar. The context menu now allows selecting the desired time range.
• AVI Export of Video Data
  The resulting video can now be saved as an AVI file with different resolutions, frame rates and video qualities using the M-JPEG codec. Select one of the entries Mobile, PC and Custom in the context menu of the Export icon.
  Note:

  • The size of the exported AVI file(s) is directly influenced by the settings for resolution, images per second (i.e., the frame rate) and the quality. Thanks to the M-JPEG codec used, using only half of the frame rate generates a file with more or less half the size.
  • AVI files can be max. 2 GB in size. If this size is reached when exporting, the program automatically produces subsequent files with incremented numbers, such as <file name>_nnn.avi.

Action Log (User Log)

When creating a new MxMC project, the program automatically creates a file that logs all significant actions of the current user. To view this log, open Window > Action Log in the menu; this dialog also allows filtering by search text and exporting the displayed log as a PDF file.

Configurable Alerting

The Alarms option in the Camera Configuration dialog has been extended by additional settings. You can now define individual sets of event types for each camera, which will prompt MxMC to alert the user. In addition, the entire alerting mechanism can now be scheduled. For this purpose, you can define weekly schedules and assign them to individual event types. An alarm will apply red color to the event images, the alarm bar and the alarm info bar in the display windows of a grid. if activated, an alarm message will pop up.

The alarm bar contains the new Alarm filter slider. Use this slider to show all event images in the alarm bar (default) or only the event images that have also been activated as alarms.

Important: The alerting mechanism is a program setting that is individual to each installation; it is not a general setting that is stored in the camera. This means that events can occur, which will not trigger an alarm. On the other hand, there is no alerting without an event, since they are used as alarm triggers. Independent of the current alarm settings, you can always access all recorded events of the integrated cameras using the (Grid) Playback and Research views in MxMC.

Connection Monitoring (Lost Connection Detection)

The connections to all cameras that have been integrated into MxMC and are active are monitored constantly; a warning dialog will list the lost connections. The program indicates lost connections by showing a red exclamation mark in the top right corner of the program window. Clicking on the icon will show detail information on the cameras with lost connections. In the Monitoring section of the MxManagementCenter > Preferences dialog (Mac) or the File > Preferences dialog (Windows), you can select different options for the audio-visual alarm indicators. In addition, the program can add current snapshot images of all cameras that will be shown automatically for the corresponding camera if that connection is disrupted. This means that even in case of vandalism or theft of a camera, you will always have meaningful images at hand.

Post VM (Post Video Motion Detection)

Using this new feature, you can search recordings retroactively for changes in the images. To do so, click on the new Plugins icon in the Playback or Grid Playback views and select Post Video Motion detection from the context menu. Use this dialog to set the search options and to define one or more search windows in the video image. Next, play back the recording in any direction and with the desired speed. If the plugin detects a change in the defined search windows that fits the specified criteria, playback stops. You can repeat this process as often as you like, until you have found the image with the change you looked for (e.g., a missing object).

Performance Improvements

This version of MxManagementCenter can display a lot more camera live images at the same time in one or more grids as the predecessor version. This is especially true if the integrated cameras are triggering many events on a regular basis that have to be processed by MxMC. Depending on the hardware and the same number of detected events, MxManagementCenter can now show up to twice the number of live cameras with unlimited frame rate on a grid than its predecessor.

Other Improvements

• Proxy Server
  You can now connect to cameras via a proxy server. Open MxManagementCenter > Preferences (Mac) or File > Preferences (Windows) and enter the settings for the proxy server in the new Network section.
• Display Area Scaling
  The General section of the MxManagementCenter > Preferences dialog (Mac) or the File > Preferences dialog (Windows) contains the new Display Area subsection. This section contains two options that control the scaling of the display area when opening the bars at the top or the bottom. Activate the options for the Camera/Group bar and the Alarm/Export bar to always see the entire (scaled) display area.
• Accessing Recordings
  In the Playback and Grid Playback views, you can now temporarily switch the data access from direct access on the file server to Via Camera. To switch, simply click on the hard disk icon that is shown in front of the timestamp of the recording in the camera image while playing back. The icon now shows an SD card; click again to switch back to the defined recording path. Note that this switch is only temporary. It only applies to playback functions and does not influence the export of video data. This method can be used as a temporary fix for connection problems, for example.
• "Camera Management" Dialog
  The Camera Management dialog now has a new slider at the bottom for sorting the camera list by camera names or IP addresses.
• User Rights
  The Application Usage item of the user rights now contains the additional entries Export bar, Action Log and Switch Environments.
• Alarm Notification
  If the program window has been minimized, any inbound alarm that triggers an alarm notification will automatically restore the window to its original size.
• New Remote Control Commands
  For MxMC remote control, two new commands have been added:
  • show?group=<group name> shows a camera group.
  • show?camera=<camera name> shows a camera.

  Note that you can also combine these commands:
  show?group=<group name>&camera=<camera name>&grid

Bugfixes

• Playback of recordings of P2 cameras
  When playing back recordings from a P2 camera (M12, D12, etc.) via direct file server access, the program showed an SD card icon in the center of the image.
• Playback of exported MXG files
  It was not possible to play back exported MxPEG files (.MXG) under Windows using VLC or Windows Media Player (with installed MxPEG DirectShow codec).
• Slider for Hemispheric display modes
  After activating the quick help using the Help (?) icon, the slider for selecting the display mode of a hemispheric camera in the focus window of a grid disappeared even though the quick help had been closed in the meantime. Also, the display and the icon of the slider did not match the currently displayed camera. The slider did not always show for hemispherical cameras. For non-hemispherical cameras, the slider sometimes showed but did not function.
• MxMC installations on different Windows systems
  You can now set up MxMC in Windows installations with the same Windows product ID on different computers and then use the program as a remote station for door stations. For registering MxMC with the camera, the program now uses a different unique ID rather than the Windows product ID.
• "Audio Playback" user right
  Users without the Audio Playback right were able to hear the audio track in the Playback and Grid Playback views, if the camera had recorded audio beforehand.
• Live image display on second monitor
  Double-clicking on a grid tile displayed the camera's live image on a second monitor, but sometimes showed a gray tile in the program window.
• Adding cameras to a grid
  When adding new cameras to a grid in edit mode, one tile sometimes contained more than one camera.
• Audio settings
  The Push to talk setting in the Audio section of the MxManagementCenter > Preferences dialog (Mac) or the File > Preferences dialog (Windows) was not stored and had to be re-applied every time after starting the program.

Important Notes for Installing on Windows Systems

If you intend to install this version on Windows Vista, Windows 7, 8 and 8.1 systems, you need to make sure that the Visual C++ Redistributable for Visual Studio 2015 package has been installed.

Please observe the following hints:

• The installation wizard (file MxManagementCenter_1-2-win64/32_Setup.exe) will automatically install this package in the last step of the setup process. If you cancel the wizard before completing this step, you will need to install the package manually. To so, download the package from the Microsoft website (file vc_redist.x64.exe for 64 bit or vc_redist.x86.exe for 32 bit systems) and install it. You may have to remove a package that had only been installed partially in a previous attempt.
  Remark: If the Visual C++ Redistributable for Visual Studio 2015 package is not installed, MxSoftPanel will show an error message after starting that the file api-ms-win-crt-runtime-1.0.dll is missing.
• Additional prerequisites on Windows 7 systems for installing the Visual C++ Redistributable for Visual Studio 2015 package:
  • Make sure that the Service Pack 1 has been installed.
  • Install the newest version of Internet Explorer for the system.
  • Make sure that all security updates have been installed using Windows Update.

Known Limitations

• Post Video Motion Detection (Post VM)
  When playing back recordings from the camera, Post VM detection does not work on time ranges that had been played back previously, immediately before the current playback.
• Audio Playback
  When playing back recordings with audio, sound dropouts may occur infrequently, especially in continuous recordings. These dropouts only occur when playing back in the Playback and Grid Playback views, but not in the exported video files of the recordings.
• "Mailbox Messages" filter
  If the Mailbox Messages filter has been set, the new histogram, which shows the distribution of events over time, currently stays empty and does not show any door station messages.
• AVI export by the camera
  When exporting a recording with gaps as an AVI file from the camera, these gaps will show as time ranges without movement in the AVI file. Instead of using one large time range with gaps (e.g., from an event recording), you should add several small time ranges to the export list for exporting.
• Integrated P2 cameras (M12, D12)
  P2 cameras (e.g., M12, D12), which were added manually (i.e., not via the automatic camera search), will again show up in the results of the camera search.
• Fullscreen display on Windows machines
  If a hemispheric camera has been displayed as Panorama image or a similar view with distortion correction in Fullscreen mode by MxMC on a Windows machine, this mode does not allow using the menu any more. If this happens, close the Fullscreen display mode by pressing either [ESC] or [F11].

top

Release 1.1.1 of MxManagementCenter

Creation Date: 2015-12-17

Publishing Date: 2015-12-18

Enhancements and Improvements

Exporting With Direct File Server Access

If direct file server access has been defined for browsing and playing back recordings, exporting will now also use the direct file server access. Until now, the data for exporting had been handled via the camera, which also provided the actual data. Using the direct file server access perceptibly increases export speed.

Note: Currently, the progress indicator does not show a fully completed export when using direct file server access. The indicator stops at 99%, although the exported file has been written completely. If the indicator stops, you can cancel the export. Next, you can manually add the exported file to the application (using drag&drop) for playback.

Alarm Handling

Using the new Alarms option in the Camera Configuration dialog, you can set up MxMC to interpret new events received by individual cameras as alarms. An alarm will apply red color to the event images, the alarm bar and the alarm info bar in the display windows of a grid. if activated, an alarm message will pop up.

Message Distribution Using MxMessageSystem

From this release onward, you can define special hyperlinks to send messages using the MxMessageSystem of the integrated cameras and their MxBus modules. The hyperlinks are defined using the following syntax:

mxmsg://<camera IP address>/<message>
 or
mxmsg://<camera name>/<message>
 instead of when using regular URLs
http://<camera IP address>/<URL>

Note that you can only use IP addresses and names of cameras that have already been integrated into MxMC and that have also been activated.

Example:
mxmsg://10.17.143.93/OpenGarageDoor

Bugfixes

• Subsequent distortion correction and vPTZ in MxMC
  When using vPTZ actions in MxMC with subsequent distortion correction of hemispherical camera images on a grid in edit mode, the stored positions had not been applied properly upon re-opening the grid.
• Playback of recordings with long pre-alarm
  When playing back event recordings with audio and a pre-alarm of > 5 seconds recorded by a camera with software release 4.3.4.50 or 4.3.4.66, the pre-alarm had not been shown in playback when accessing the recording directly from the file server. You can play back the recordings in the playback view via the camera, provided the camera is running software release 4.3.4.80 or higher.
• Time searches with recording gaps
  If you had been searching for a specific point in time (using the calendar icon or by entering a search time) and there had not been any recordings at that time, the playback view did not jump to the image that was closest to the specified time. Instead, the playback view always jumped to the last image before this point in time.

Known Limitations

• Alarm handling and changing of grids
  When integrating many cameras (> about 30) that generate many events (alarms), problems may occur when often changing grids while showing the alarm bar.

top

Release 1.1 of MxManagementCenter

Creation Date: 2015-11-19

Publishing Date: 2015-11-20

Enhancements and Improvements

Direct File Server Access

For browsing and playing back recordings, the program can now access the data directly on the file server using SMB/CIFS (e.g., a NAS system). This includes direct access to the data stored in MxFFS archives or in the classical MOBOTIX folder/file structure. As a result, the playback of recordings is independent of the camera and – most often – a lot faster than when accessing the data via the camera.

To use the direct file server access, the corresponding file server paths are defined in the File > Preferences > Recording Paths dialog. Next, these paths are assigned to the individual cameras in the Camera Configuration dialog. Depending on the setting, MxMC will access the recordings either via the camera or directly on the defined file server. When playing back the recordings from the file server, the Player now shows an additional > icon below the image. It is used to browse the recordings to a maximum of 30 seconds before and after the current image.

Several Languages Supported

The user interface and the integrated quick help of the program are available in the following languages: English, German, French, Italian, Japanese, Portuguese, Russian, Spanish, and Turkish.

If available, the program will automatically use the same language as the operating system. If the language is not present, English or the second system language will be used. Note that you can manually select other languages in the File > Preferences > General dialog.

Grid View With Option for Performance Optimization

The Group Configuration dialog (right-click on a group or the Camera Management icon) now allows setting a maximum frame rate. Doing so will limit the live cameras that are displayed in the grid tiles to the specified frame rate. Depending on the number and the frame rates of the cameras, this will result in a significant reduction of processor load in the application. Likewise, the required bandwidth used for transferring the images from the cameras to MxMC will drop. This means that you can show even more cameras at the same time. Note that this setting does not affect the focus window of a grid.

Grid Export

When exporting recordings from a grid, you can now select individual cameras after starting the export.

Joystick Calibration, Axis Adjustment and Behavior

To calibrate a joystick and to adjust its axes and its behavior, open the File > Preferences > Joystick PTZ dialog and change the settings as desired.

Known Limitations

• Subsequent distortion correction and vPTZ in MxMC
  When using subsequent distortion correction of hemispherical camera images in MxMC, some display modes (e.g., Panorama ceiling-mounted) are not yet supported. In addition, after executing vPTZ actions with a grid in edit mode, the stored positions are not applied properly after storing and re-opening the grid.
• Playback of recordings with long pre-alarm
  When playing back event recordings with audio and a pre-alarm of > 5 seconds recorded by a camera with software release 4.3.4.50 or 4.3.4.66, the pre-alarm will not be shown in the player when accessing the recording directly from the file server. You can play back the recordings in the player via the camera, provided the camera is running software release 4.3.4.80 or higher.
• Time searches with recording gaps
  If you are searching for a specific point in time (using the calendar icon or by entering a search time) and there is no recording at that time, the player will not jump to the image that is closest to the specified time. Instead, the player will always jump to the last image before this point in time.

top

Release 1.0.1 of MxManagementCenter

Creation Date: 2015-06-29

Publishing Date: 2015-06-30

Enhancements and Improvements

Windows Support

As opposed to release 1.0 of the software, this release also supports Windows systems with Windows Vista or higher (32 and 64 bit).

OpenGL and Image Quality Settings

The Preferences dialog, General section contains two new options:

• OpenGL: In order to subsequently correct the distortion of hemispheric camera in MxMC, the computer must have "OpenGL" support. If you are observing problems when displaying (many) camera images and you do not need subsequent distortion correction, you can deactivate OpenGL. Note that this will also slightly reduce the processor load. The corresponding icons of the user interface for configuring distortion correction are not available any more. If the automatic test after launching the program determines that there is no valid OpenGL version (2.1 or higher), this option is disabled and cannot be re-enabled any more.

  Note:
  Due to the differences in hardware support, this option has been activated on Mac OS X systems and deactivated for Windows systems by default.

• Quality: Use this option to show scaled-down camera images (e.g., in the small display windows of a grid) in either high or normal quality. Note that using high quality will create a significantly higher system load, especially when showing many camera images at the same time. You should thus deactivate this option on systems with lower performance to reduce the system load and to improve the reaction speed of the user interface. By default, this option is set to High" on Mac OS X systems and to "Normal" on Windows systems.

In addition, release 1.0.1 contains many error corrections and smaller improvements as compared to release 1.0.

Known Limitations

• Player with camera access
  The player currently always accesses the recordings via the camera when searching and playing back recordings. It is not yet possible to directly access the recordings stored on a file server. It is hence recommended to use the camera's integrated SD card for storing the recordings.
• Displaying/changing camera configuration settings
  Changing the camera configuration settings in the Configuration view is not yet supported by this release.
• Online Help
  The online help of this release is only available in English and German. Note that the help is not yet complete.

top

MxManagementCenter Release 1.0 − Mac OS X Only

Creation date: 2015-06-03

Publishing date: 2015-06-03

Content

The MOBOTIX MxManagementCenter is a completely newly developed, intuitive video management system for Windows and Macintosh systems. This document describes how to install and use the software and includes a brief technical description of the essential system functions as well.

The First Program Start and a Demo Configuration

• The MOBOTIX website contains a file named MxMC-Demo.configuration which contains a pre-defined MxManagementCenter configuration along with several MxPEG video clips. When loaded, this configuration will give you an overview of the program structure and the most important functions of the MxManagementCenter without having to add cameras to try it out.
• This release of the program comes with an English, German, and French user interface. If possible, the program will launch with the same language as your operating system language. You can change this setting manually in the File > Settings menu. If the language is not supported, the program will start in English.
• When the MxManagementCenter starts you are presented with a MxManagementCenter Welcome dialog and by clicking on the icon named Open Project you can then select the previously saved MxMC-Demo.configuration file and the Program will load and start with that configuration.
• If you have already started the MxManagementCenter with another configuration or created a new Project, you can still load this configuration and try it out it via the menu item File -> Open Project or via the Open function available in the menu displayed by clicking on the Projects and network environments icon.
• The MxManagementCenter Welcome dialog also provides a function to import an existing MxControlCenter ini file or a list of cameras from a MxEasy.ndb out of an existing MxEasy installation. In both cases, the cameras are automatically added to the MxManagementCenter using the access information stored by the MxControlCenter(MxCC) and MxEasy. And if you have selected import of an MxControlCenter ini, not only will the cameras be added to the MxManagementCenter, but any layouts you created using the MxControlCenter will be automatically added to the MxManagementCenter as well. Each layout will be added as an individual Group of cameras. For each background layout additionally the existing background image along with icons representing the cameras is used for the corresponding Graphic view in the MxManagementCenter.

Main Functions

The MxManagementCenter is a video management software with a focus on a simple and intuitive interface. Full screen display of a camera via mouse click, multi-monitor support, a clear representation of events and alarms, the control of door stations as well as the execution of many actions by "drag and drop" are just some examples of the many program functions.

Main Functions

Out of the above already mentioned many possibilities for viewing and control of cameras and door stations of your video surveillance system, the most important functions are the following ones:

• Addition of an unlimited number of cameras.
• Touchscreen-optimized operation.
• Camera groups with representation in Grid and Graphic Views.
• Grid Views with a focus window and many controls.
• Quick display of particular cameras in the focus window by "drag and drop" from the camera bar.
• Graphic Views with freely definable icons, "soft buttons" used to execute any URL, and live windows.
• Quick switching between Grid- and Graphic-Views.
• Optical and audible alarming of new events.
• Quick switching to the Playback-View to allow playback of events and continuous recordings.
• The Instant Player that allows for quick viewing of the latest events during live video monitoring operation.
• A special Research View for easy viewing of a large number of events.
• Easy use of multiple monitors by double-clicking on the live image, grid or event image.
• A camera sequencer.
• Door-station functions (Intercom, open door, turn light on/off, etc.)
• Data export.
• Subsequent distortion correction of hemispheric camera images - in live images and in recordings

Notes for Operation

• Integrated online help
  Clicking the "?" icon at the top right will display a context-sensitive Quick Help. This Quick Help shows an abbreviated functional description of all icons and other controls in the current view.
• In the Windows version of the program, the menu bar is hidden by default, but it can be displayed (and hidden again) via pressing the "Alt" key. Almost all icons have a dual function - if you click on the icon a particular pre-defined function will be executed and if you click and hold down the left mouse button or click with the right mouse button on the icon a menu will be displayed. Icons with a dual function are almost always marked as such using a small triangle in the lower right corner of the icon.
• Working with the MxManagementCenter is done via different Views (Live, Player, Grid, Graphic, etc) that are switched into the main program window. This switching is executed either via the icon Switch View in the lower left corner of the application window or the menu item View. Inside the different Views along the top and bottom edges (dependent upon the View) there is often a film strip which can be clicked upon to open it. When opened it provides a quick method of selection of items used in each view. The film strip at the top allows for quick selection of cameras and camera groups, and the film strip at the bottom allows for quick selection and display of event images.
• The Welcome dialog provides an easy-to-use dialog for convenient addition of cameras to the MxManagementCenter as well as for storing and loading configurations. It is accessed via the menu item File -> Welcome.
• Integration of cameras and definition of camera groups
  The addition of cameras and door stations to the MxManagementCenter is most easily done via the Welcome dialog, but it can also be done via the context menu of the Camera Management icon, available in the Live , Grid and Graphics Views. The definition of camera groups can only be done via the context menu of this icon.
• Displaying camera images
  By default, MxManagementCenter fits all camera images to fill the entire image area. This often results in images being shown as zoomed in, so there are no grey/empty borders. A Zoom icon "+" on the slider below the display area for the image allows the user to zoom out (and in) so that the entire visible image of the camera can be viewed. The mouse wheel or touch pad can also be used to zoom in and out as well.

Known Limitations

• Player with camera-only access to recordings
  The player used to browse and playback camera recordings currently always accesses the recordings via the camera regardless of where the recordings are stored. Direct access to a file server that is used to store recording is not yet possible. Playback of recordings stored on the camera's internal SD card is, therefore, the most effective method in this beta version of the program.
• Display and change of camera configuration
  Changing the camera configuration in the Configuration view is not included in this release.
• Online Help
  The online help in this release is only available in English and German. Please note that the online help is not quite complete.