Release Notes for MOBOTIX MOVE NVR-8/16 Models
Document
Information
|
Publisher:
|
MOBOTIX AG
|
|
Author:
|
Thomas
Dieregsweiler
|
|
Date:
|
2024-06-01
|
|
Document:
|
release-notes_mb20240429NVR816_en_v1-1.html
|
|
Confidentiality:
|
Public
|
Contents
These Release Notes
contain a technical description of the most important changes in the software
for the MOBOTIX MOVE NVR 8/16 channel devices.
Overview
of Software Releases
Notes:
- Please
download the stable customer releases of the software from www.mobotix.com in the Support >
Download Center > Software Downloads section.
- After
downloading the software, please extract both files to the same folder.
The device needs both files at the same location in
order to verify the software before starting the installation.
- Please
send an email to support@mobotix.com
for feedback.
top
Software Release mb20240429 NVR816 for MOBOTIX MOVE Mx-S-NVR1A-8/16-POE, Mx-S-NVR1B-8/16-POE
Creation Date: 2024-04-29
Publishing Date: 2024-06-01
New
Features
· None
Improvements
- Implemented a mechanism to sync camera connection password settings
automatically after the user modifies the password
- Adjusted device search “Add Device” conditions to filter for
''MOBOTIX MOVE''
- Applied ''Device'' authority settings for the ''Web Page'' option
Bugfixes
- Changed motion/mask settings to correspond with multi-sensor camera
streaming
Hints
- Compatible camera FW: Minimum
camera FW version to support config upgrade: mb20220712UX
top
Software Release mb20240301NVR816 for MOBOTIX MOVE
Mx-S-NVR1A-8/16-POE
Creation Date: 2024-03-01
Publishing Date: 2024-03-15
New
Features
- Instant playback which allows user to select single channel
playback at live page
Improvements
- Optimize features for multi-sensor models: present all screens
captured by the machine in groups & automatically capture sub streams.
- Modify the web page refresh rendering service.
- Enable the WebViewer for camera.
Bugfixes
- Fix the popup window bug.
- Fixed the rtsp_server bug.
- Fixed Axis encoder connect issue.
- Fixed Axis camera connect Onvif issue.
- Fixed https setting bug after import config file.
Hints
- Compatible camera FW: Minimum
camera FW version to support config upgrade: mb20220712UX
top
Software Release mb20231013NVR816 for MOBOTIX MOVE Mx-S-NVR1A-8/16-POE
Creation Date: 2023-10-13
Publishing Date: 2023-10-23
New Features
- Added Pop Up messages while
leaving the add device page in case the camera is not connected correct
yet.
- Added forget password function
(requires latest MOVE NVR APP update)
- Added user password setup hint
and “modify Password” for connected cameras via NVR remote Browser
Improvements
- Modified description text for
WAN port DHCP server
- Added hint text when credential
is wrong
- Support MOVE Multi-sensor
camera connection
- Modified the GUI wording in add
device
- Implemented support for the
Axis Encoder
- Implemented modification for
the Export Schedule
Bugfixes
- Fixed
time zone crash issue in
combination with CMS Software
Hints
top
Software Release mb20230301NVR816 for MOBOTIX MOVE Mx-S-NVR1A-8/16-POE
Creation Date: 2023-03-01
Publishing Date: 2023-03-23
New Features
- Add the ONVIF camera time sync service
- Add camera time sync setup service
Improvements
- Mobotix PTZ keyboard integration
- HTTP Event
Notify Server Refine
- Update the
notification/Warning Image icon
- Modified
VA data path for Windows Edition
- Modified
GUI IR Gain Option Layout
- Enabled
HTTPS port change service
- Support of
the PTZ keyboard controller left/right hand mode
Bugfixes
- Fixed PTZ control in left hand side
- Fixed multiple NAS device at system bug
- Fixed some
text translation error
- Fixed the
bug about the event zone drawing service
- Fixed the
event snapshot problem in Notify Center
top
Software Release mb20221101NVR816 for MOBOTIX MOVE Mx-S-NVR1A-8/16-POE
Creation Date: 2022-11-01
Publishing Date: 2022-11-04
New Features
- Support Vaxtor Camera LPR Event
- Add event push message service (NVR/Remote)
- Add white/black list servce for Face_R & LPR
- Add bypass
camera Face Recognition & LPR Service
- Add event
notify network service
- V2 Camera
Event triggered by metadata stream
- Enable
Edge option setup service (Remote)
- Modified
the event log search service
- Add Videotec Joystick Support
- Support Onvif PTZ Service
- Support
Face Recognition/LPR Database Edit service (NVR/Remote)
- Disable
google drive service (Google policy)
- Videotec keyboard integration
- Please
connect Keyboard with NVR, then reboot to detect new device.
- Once the
keyboard is detected, you will see keyboard model name Videotec DCZ 1 shown on the Joysticks page. The whole
page will become grayed out
- Support
Video analytics setting from remote
- Support
edge recording from remote
- Setup>
System> Event management, for video analytics, support In list/ white list/ black list/ Not in list
- The
definition of bypass/ Normal could refer to our proposal about vaxtor in
- From this
version, video analytics action will depend on the list. Whenever there
is subject enter zones, action will be triggered depending on the action
defined by list. Let’s say Vera is in the blacklist. As
long as Vera enters any of the zones, then she will trigger action
linked to the blacklist. Same list setting is applied for all of the cameras.
- Vaxtor
integration
- No need
to configure camera setting from NVR side
- On Liveview page, no additional options
for configuring LPR setting
- NVR could receive
Vaxtor events
- There will be notification in the message center
- NVR could
configure corresponding actions for Vaxtor events
- User
could configure the corresponding event when LPR event is triggered
- Specially
note that now the user could decide the action based on the list:
- Normal:
It means NVR will judge whether there is event or not by cross checking
the detected license plate with the list inside NVR
- Bypass:
It means camera will judge whether there is event or not by cross
checking the detected license plate with the list inside camera
- Specially
note that there are 4 types of list:
- White list
- Black list
- In
list: whatever inside the database
- Not In
list: whatever not inside the database
- To
receive Vaxtor event, user need to configure the listen port in NVR.
There is a new tap under Setup> Network> Event receiver. User
could decide whether they want to enable https / authorization feature
- Camera
will need to include new message template to send correct info to NVR.
DC will provide info for camera FW revision
- Users
could receive below info from camera
- Information
will be displayed under Log> VA detected event> Info
- Now all the
info will be put into one column.
- User
could export information by using below filter condition:
- Duration
- Number
plate
- CH
number
- The
exported file format is CSV
- FW version
on the OTT test report will be in the same format as Mobotix
style mb+date code+NVR
model. EX: mb20221019NVR816
Improvements
Bugfixes
- Fixed Onvif Camera Decode Problem (Pelco Camera)
top
Software Release mb20220822NVR816 for MOBOTIX MOVE
Mx-S-NVR1A-8/16-POE
Creation Date: 2022-08-22
Publishing Date: 2022-08-31
New Features
- Read
Warning when using Motion Detection on NVR -
Event reminder will be applied on all the channels, for all the event
types - When there is an event happens since the last time users
acknowledges event, there will be a reminder icon on the top right of the
channel. - If users hover over the icon, there will be text displaying the
latest event type and event time. If user wants to check more events that
have ever happened, he should go to Playback/ Export or Log page to check
further information of that channel. - If users click on the icon, it is
equivalent to acknowledge all the events on that channel. The icon would
disappear after the click. -The behavior for local NVR and remote won't be
synchronized. For example, there is a new user logged in from web remote,
the event reminder would only count the event since his login. User from
local won't be affected by other remote users.
- Move
Camera Config upload from remote/ local,
users could decide whether they would like to apply network setting or
not. Be sure to insert a USB flash first.
Note1 : This feature requires camera FW (mb20220815 or later) to support.
Note2: Camera original FW version, model has to be exactly the same to
apply the config file
Note3: Network setting doesn’t includes IP
address, but other options like webserver port, RTSP port, etc.
- MOVE
Camera Certification file upload from remote/ local
Note: This feature requires
camera FW (mb20220815 or later) to support.
- On FW
version page, should display the zip file name so the FW version match the
release note
- Option to
send a snapshot via Email
Note: Ensure that under Setup>System >Event management, snapshot is selected
- Sending
emails only outside of business times now supported
- Support
open VPN (Local NVR only)
Note: Ensure that either LAN/ WAN port needs to be able to reach the VPN server
- Under Add
Device, the IP cam and ONVIF represents the username/ password that will
be applied based on the filter. IP cam change to
MOBOTIX MOVE
- Web.de
Mail supported
Improvements
- Setup >
storage> local storage, "inactivate" changed to "deactivate"
Bugfixes
- Move
NVR8/16 does not operate sufficient with MOBOTIX IoT P7 camera range, bad
frame rate and visual artifacts fixed
- Time gap
issue fixed: Live view showed a time difference between the NVR and Camera
as 10 seconds but there was a 7 minute difference
in the playback time display
top
Software
Release mb20220511NVR816 for MOBOTIX MOVE
Mx-S-NVR1A-8/16-POE
Creation Date: 2022-05-11
Publishing Date: 2022-05-20
New
Features
- Support
Mobotix digital signature.
- Update
Kernel data code.
- PASS
ONVIF S/T/G Device (server) test.
- Make
failover/ primary NVR system could be inter upgradable.
- This
feature is completed by putting chg_logo.chk also in the .zip file.
- Support
password change from remote.
- Upgrade
camera FW from remote.
- Could
add Wisenet camera into Move NVR .
- Under
Setup> Network> Ethernet, there is new feature "Route" to
arrange routing table priority.
- Note: The port needs to
connect to DHCP server to see the it is shown on
the list.
- Under
Record > Record Schedule, there are two recording templates.
- Record
- No Record
- Note: This is new
feature for passing ONVIF test tool.
- Display “About”
on remote web.
Improvements
Bugfixes
·
After FW Upgrade, the FW version won't be upgraded after refresh. Need
to reboot NVR to refresh FW version.
·
Couldn’t set RTSL URL under MAC + Chrome.
·
Remove "Stream Motion Setting" under LBR.
o Note: "Stream Motion
Setting” is no longer exists, but UI hasn’t removed it.
·
Could do back-end dewarp on playback for
fisheye camera.
·
See two login window under MAC + Firefox.
top
Creation Date: 2022-01-27
Publishing Date: 2022-02-25
New
Features
- User-definable
PoE-Port DHCP start IP-address for cameras connected to the PoE port
directly
Note 1 : The default IP Start-address is 192.168.51.2
Note 2 : Camera needs to be configured as DHCP
to receive IP from NVR
- MOBOTIX IoT camera bidirectional audio supported
(P6/P7)
·
Central IP camera Password change for a batch of
cameras via local NVR
·
Support
adding IP camera device by Pull live stream from IP-Camera RTSP
URL
·
Change password length to be 8-16.
The supported characters are A-Z, a-z, 0-9, !#$%&'-.@^_~
Improvements
·
UI improvement - when parameter is saved, there will be "Save
succeeded" text shown on the bottom to indicate changed parameters saved.
·
UI improvement - under "Add device", user has
to unlock the camera lock symbol first to do any parameter change. After
the parameters are changed and camera locked, there will be pop up window
"Save succeeded"
·
UI Improvement - under guest mode, users don't need to logout first to
login as admin
·
In
“About-Window” additional SW Info available: Display of FW version,
release date, 3rd Party SW-licenses (GPL, GNU…)
Bugfixes
·
UI adjustment - Under live view, adjust character length to avoid text
being blocked when using German
·
UI adjustment – Setup > Display > Video display mode shall show
English
Setup > PoE / Ip-Port Management >Advanced “Save” corrected to English
top
Software Release mb20210902NVR816 for MOBOTIX MOVE
Mx-S-NVR1A-8/16-POE
Creation Date: 2021-09-02
Publishing Date: 2021-09-15
New
Features
- Optimized DDR
configuration to avoid system crash under high loading
- Streaming
load control: if the main
stream is more than 4K resolution and stream 2 is more than D1
resolution, we will have an exclamation mark to inform the user the
resolution is more than recommended value. When mouse hovers over the
mark, a warning message “Camera Resolution is out of range” will be displayed
- New
option for support of camera reboot from UI in “Live
view > Camera system setup" dialog
- If
alarm is triggered, there will be information in
notification center.
- Long
press the power key for 10 seconds triggers force shutdown.
Long press the power key for 3-4 second triggers power options (cancel,
power off, reboot) on screen.
- Support
of App push notification
- Use
webRTC to support non-IE
browser to improve latency
- New
naming rule 'mb'+<release date>+'NVR816' for firmware binary files.
For example: mb20210330NVR816, where 816 means NVR 8 and 16 CH.
Note: Need to upgrade with .txz
& .sha512 files first then we support .zip file upgrade
- Added
Video Analytics page under Setup > Video
Analytics to manage Video analytics database.
Improvements
- For
the first login, users have to set
password (no default password anymore).
- Character
'ä-Ä', 'ö -Ö' and 'ü-Ü' are counted as special characters
which can't be used to set the password. There will be a
warning message pop-up if users use these characters.
- Updated
translations
Bugfixes
- Fisheye
compatibility issues fixed:
- Support
e-PTZ
- Fix
the issue that video type couldn’t be configured
- Under
camera motion setup, time interval configurable range is 1-7200
- Could
display stream1/2 view mode under front-end mode
- Under
Live View > Camera Video Analytics Setup,
object counting doesn’t need to be triggered first to see
detection box for other VAs
- Fixed
NVR's firmware to avoid mask (privacy zone) and VA
zone shift from defined position on new 2MP Move
range cameras.
top
Software Release dl0eL000-20210128 for MOBOTIX MOVE
NVR-8/16
Creation Date: 2021-01-28
Publishing Date: 2021-02-11
Enhancements
and Improvements
Modifications
to Better Support Remote Installation
- Added
HDD control functions:
- Format
Disk
- Show
Disk
- Smart
info
- Repair
Disk
- Inactivate
- Configurable
network settings
- Configurable
time settings
- Added
PoE management page
- Added
PTZ auto tracking
- User
will be prompted to change the default password upon every login
top
Software Release dl0eL000-20201125 for MOBOTIX MOVE
NVR-8/16
Creation Date: 2020-11-25
Publishing Date: 2021-01-06
Enhancements
and Improvements
- Added
support for MOBOTIX MX-232-IO-Box (users could not control camera signal
output via the NVR).
- Added
support for MOBOTIX MOVE SpeedDome auto tracking feature.
- Added
selection of preferred language when booting for the first time.
- Added
support for German keyboard layout.
Note
All characters on German keyboards are supported except for umlauts (äöüß) in these cases:
- When
entering username/password characters.
- When
entering text for text overlay.
- Added
support for new firmware for MOBOTIX M16 (downward-compatible).
- Added
support for MOBOTIX MOVE NVR I/O board.
- Added
time sync support where remote time format will adjust to local time
format (as set in Setup > System > Date/Time).
Notes
- The
date/time format will not change in the Setup >
System > Date/Time dialog.
- The
day of the week will not change according to the selected language in the
Setup > System > Date/Time dialog.
top
Software Release dl0eL000-20200701 for MOBOTIX MOVE
NVR-8/16
Creation Date: 2020-07-01
Publishing Date: 2020-09-01
This is the first software
for the MOBOTIX MOVE NVR product line.
Copyright
© 1999 – 2022, MOBOTIX AG, Germany, support@mobotix.com