Release Notes for MOBOTIX MOVE Camera Models Mx-BC1A-4-IR, Mx-BC1A-4-IR-D, Mx-VB1A-4-IR, Mx-VB1A-4-IR-D, Mx-VD1A-4-IR, Mx-VD1A-4-IR-D Camera Software

---

Document Information

Publisher:	MOBOTIX AG
Author:	Thomas Dieregsweiler
Date:	2023-06-25
Document:	Release-Notes_ mb20230426RP_en_v1.html
Confidentiality:	Public

Contents

These Release Notes contain a technical description of the most important changes in the software for the MOBOTIX MOVE network cameras.

Overview of the Software Releases

Release Version	Creation Date	Publishing Date
mb20230426RP	2023-04-26	2023-06-05
mb20221116RP	2022-11-16	2023-02-28
mb20220815RP	2022-08-15	2022-08-31
mb20220408RP	2022-04-08	2022-05-17
mb20210607RP	2020-06-07	2021-09-15
mb20201123RP	2020-11-23	2021-01-06
mb20200318RP	2020-03-18	2020-08-04
mb20200131RP	2020-01-31	2020-02-14
mb20191031RP	2019-10-31	2019-12-18
mb20190711RP	2019-07-11	2019-08-06
mb20181025RP	2018-10-25	2018-11-02

 

Notes:

• mb20220815RP firmware is the last FW-Release for related cameras due to camera series obsolence – Code freeze, severe Bug-fixes only!
• Please download the stable customer releases of the software from www.mobotix.com in the Support > Download Center > Software Downloads section.
• Please send an email to support@mobotix.com for feedback.

Important:

• When upgrading camera FW from Release Versions before October 2022, please rename this FW-file and add as prefix: uImage_userland_all_

 

 

top

Software Release mb20230426RP - for MOBOTIX MOVE Camera Models Mx-BC1A-4-IR, Mx-BC1A-4-IR-D, Mx-VB1A-4-IR, Mx-VB1A-4-IR-D, Mx-VD1A-4-IR, Mx-VD1A-4-IR-D

Creation Date: 2023-04-26

Publishing Date: 2023-06-05

Enhancements and Improvements

• Removed the IEEE 802.1x private key password limitation.
• Removed UI email password limitation allowing up to 31 characters
• Added upload snapshot via FTP, to have 0 as an option in either the pre or post trigger.
• Added upload snapshot via FTP, to be able to upload into two FTP servers at the same time.

 

Bugfixes

• Fixed additional users cannot be given any rights.
• Fixed snapshot function on FireFox.

 

top

Software Release mb20221116RP - for MOBOTIX MOVE Camera Models Mx-BC1A-4-IR, Mx-BC1A-4-IR-D, Mx-VB1A-4-IR, Mx-VB1A-4-IR-D, Mx-VD1A-4-IR, Mx-VD1A-4-IR-D

Creation Date: 2022-11-16

Publishing Date: 2023-02-28

Enhancements and Improvements

• SYSLOG needs to be deleted after Full Factory Default.
• No password reset after Partial Factory Default.
• FTP password limitation extended to 64 characters.

Bugfixes

• Fixed SD card video recording issue

·       Fixed streaming flicker issue under specific resolutions

  

 

 

 

 

top

Software Release mb20220815RP - for MOBOTIX MOVE Camera Models Mx-BC1A-4-IR, Mx-BC1A-4-IR-D, Mx-VB1A-4-IR, Mx-VB1A-4-IR-D, Mx-VD1A-4-IR, Mx-VD1A-4-IR-D

Creation Date: 2022-08-15

Publishing Date: 2022-08-31

Enhancements and Improvements

• Support web.de email server send/receive
• New Password Policy Covered
• Removed firmware upgrade file name limitation without requiring to be name as 'uImage_userland'
• Non-IE browser: Improve h.264 latency

Bugfixes

• -
  

top

Software Release mb20220408RP - for MOBOTIX MOVE Camera Models Mx-BC1A-4-IR, Mx-BC1A-4-IR-D, Mx-VB1A-4-IR, Mx-VB1A-4-IR-D, Mx-VD1A-4-IR, Mx-VD1A-4-IR-D

Creation Date: 2022-04-08

Publishing Date: 2022-05-17

Enhancements and Improvements

• Show correct model name when using IP Scanner.
• Support None IE display H.264 video. (Not support Safari)
• Disable ports: TCP-6666, TCP-7878, TCP-8008.
• HTTP Authentication is set to digest by default.
• RTSP Authentication is set to digest by default.
• Closes RTSP/ONVIF before the user change the default password.
• Add US date format MM/DD/YYYY.
• Increased fastest shutter speed.
• Support OpenVPN.
• Periodical Event includes trigger action "HTTP Notification".
• Added adjustable recording file size.
• Changed the browser tab name with the host name.
• Edited Network Page to show "MJPEG over HTTP port"
• Upgraded NTP Server to latest version.
• Implemented “Save succeeded” after pressing Save Button on WebGUI.
• Default https enable (TLS1.2).
• Edited the Periodical Event time interval from 60 seconds to 10 seconds.
• Unlocked Config file to be able to upload with different file names.
• Non-IE browser: Improve h.264 latency.
• Remove Play Button on non-IE browser using h.264
• Block Multicast Reserve IP 224.0.0.1
• Show GPL License text on Camera Information Page.
• The Log should contain time and identifier of the requester like IP of the PC or Name of the PC.
• Enable the user to use Special character -_*!
• Adjusted Button position in IRIS Size Setting.
• Upgrade Viewer to latest version.
• New way to upload HTTPS certificate.
• Disabled Bonjour service by default.

 

Bugfixes

• Fixed MJPEG display technics on none-IE browser under unstable network.
• Safari browser, h.264, show green image issue.
• Fix the bug of rotation clockwise via NVR at 2688x1512 WDR Mode.
• SSL Certificate Expiry bug.
• Edited exposure max gain MOVE NVR integration issue.

 

 

 

 

top

Software Release mb20210607RP - for MOBOTIX MOVE Camera Models Mx-BC1A-4-IR, Mx-BC1A-4-IR-D, Mx-VB1A-4-IR, Mx-VB1A-4-IR-D, Mx-VD1A-4-IR, Mx-VD1A-4-IR-D

Creation Date: 2021-06-07

Publishing Date: 2021-09-15

Enhancements and Improvements

• Support of new P-IRIS module.

 

top

Software Release mb20201123RP for MOBOTIX MOVE Camera Models BC-4-IR(-D), VB-4-IR(-D), VD-4-IR(-D)

Creation Date: 2020-11-23

Publishing Date: 2021-01-06

Enhancements and Improvements

• New password policy: Password must be between 6 and 16 characters long, have at least one digit and must not contain any special characters. The camera will show a corresponding warning if the password does not follow these rules.
• Added checkbox to enable/disable TLS 1.0.

Bugfixes

• Fixed shifting mask issue when using PTZ.
• Fixed typo "MJPEG" on main page.
• Fixed Genetec certification issue.

 

top

Software Release mb20200318RP for MOBOTIX MOVE Camera Models BC-4-IR(-D), VB-4-IR(-D), VD-4-IR(-D)

Creation Date: 2020-03-18

Publishing Date: 2020-08-04

Bugfixes

• User Accounts are restricted to I/O Access.
• Stream Unicast + Multicast.

 

top

Software Release mb20200131RP for MOBOTIX MOVE Camera Models BC-4-IR(-D), VB-4-IR(-D), VD-4-IR(-D)

Creation Date: 2020-01-31

Publishing Date: 2020-02-14

Enhancements and Improvements

• Added video codec H.265 to reduce bit rates as well as throughput and storage requirements.
• Added support of ONVIF Profile T (in addition to Profile S/G).
• Added support for SMBv2 (SMBv1 before).
• It is now possible to define several administrators with individual access credentials for a camera.
• Added method for importing a full camera configuration file with selectable settings.

Bugfixes

• Corrected faulty behavior when importing configuration files in browsers other than Internet Explorer.
• Corrected faulty handling of BOOTPROTO parameter when importing configuration files.

 

top

Software Release mb20191031RP for MOBOTIX MOVE Camera Models BC-4-IR(-D), VB-4-IR(-D), VD-4-IR(-D)

Creation Date: 2019-10-31

Publishing Date: 2019-12-18

Enhancements and Improvements

• MTU can now be adjusted in the web interface.
• MAC address is now displayed in the web interface.

Bugfixes

• Numerous stability and security fixes

 

top

Software Release mb20190711RP for MOBOTIX MOVE Camera Models BC-4-IR(-D), VB-4-IR(-D), VD-4-IR(-D)

Creation Date: 2019-07-11

Publishing Date: 2019-08-06

Enhancements and Improvements

Full ONVIF S Conformity Attained

With this release, the cameras are fully compliant to ONVIF S according to the ONVIF Test Tool v18.12.

Other Enhancements and Improvements

• Bonjour is now activated by default.
• New Camera Information dialog added.
• Default setting for image resolution adjusted.

Bugfixes

• Storage of periodic events on SD card did not work reliably.
• Fixed typo in naming of ONVIF Scope Record.
• Fixed error in Genetec multi streaming protocol.
• Fixed an error when accessing a network share with credentials that contained special characters.
• Fixed an error in the German user interface.

 

top

Software Release mb20181025RP for MOBOTIX MOVE Camera Models BC-4-IR(-D), VB-4-IR(-D), VD-4-IR(-D)

Creation Date: 2018-10-25

Publishing Date: 2018-11-02

Enhancements and Improvements

Integration in MxManagementCenter 2.0 and MOBOTIX NAS

Starting with this release, MOBOTIX MOVE cameras can be integrated in MxMC 2.0 and MOBOTIX NAS devices. The integration uses ONVIF Profile S for this purpose.

Bonjour Search

Starting with this release, you can find MOBOTIX MOVE cameras on the network using the Bonjour service. Open the System > Network > Bonjour dialog to find the settings.

ONVIF Profile S

This release contains improvements to the ONVIF Profile S to enhance the integration in MxMC 2.0 and MOBOTIX NAS devices.

Other Improvements

• Streaming settings
  Stream 3 set to M-JPEG, 1920x1080.
• API commands
  Adjusted API command for getting user rights.
• ONVIF Scope names
  ONVIF host name adjusted for integration in MxMC 2.0.

Bugfixes

• Lost ONVIF Scope Records after updating
  After updating the firmware, scope records written before the update had disappeared.
• Wrong scheme when using SSL
  Requests to the camera via HTTPS had not been answered using HTTPS.

Copyright © 1999 – 2021, MOBOTIX AG, Germany, support@mobotix.com