Release Notes for
MOBOTIX MOVE PTZ Camera Models Mx-SD1A-230-LL, Mx-SD1A-330, Mx-SD1A-340-IR Camera Software
Document Information
|
Publisher:
|
MOBOTIX AG
|
|
Author:
|
Thomas
Dieregsweiler
|
|
Date:
|
2023-02-28
|
|
Document:
|
release-notes_ mb20221116RS_en_v1-1.html
|
|
Confidentiality:
|
Public
|
Contents
These Release Notes
contain a technical description of the most important changes in the software
for the MOBOTIX MOVE network cameras.
Overview of the
Software Releases
Notes:
- Please
download the stable customer releases of the software from www.mobotix.com in the Support >
Download Center > Software Downloads section.
- Please
send an email to support@mobotix.com
for feedback.
Important:
· When upgrading camera FW from Release
Versions before October 2022, please rename this FW-file and add as prefix: uImage_userland_all_
top
Software Release
mb20221116RS
for MOBOTIX MOVE PTZ Camera Models Mx-SD1A-230-LL, Mx-SD1A-330, Mx-SD1A-340-IR
Creation Date: 2022-11-16
Publishing Date: 2023-02-28
Enhancements
and Improvements
- SYSLOG
needs to be deleted after Full Factory Default.
- No
password reset after Partial Factory Default.
- FTP
password limitation extended to 64 characters.
Bugfixes
· Fixed SD card video
recording issue.
· Fixed streaming
flicker issue under specific resolution
top
Creation Date: 2022-08-15
Publishing Date: 2022-08-31
Enhancements
and Improvements
- Support
web.de email server send/receive
- PTZ
defog feature added
- New
Password Policy Covered
- Removed
firmware upgrade file name limitation without requiring to be name as 'uImage_userland'
- Non-IE
browser: Improve h.264 latency
Bugfixes
·
-
top
Software Release
mb20220408RS
for MOBOTIX MOVE Camera Models Mx-SD1A-230-LL, Mx-SD1A-330, Mx-SD1A-340-IR
Creation Date: 2022-04-08
Publishing Date: 2022-05-17
Enhancements
and Improvements
§ Show correct model name when using
IP Scanner
§ Block Multicast Reserve IP 224.0.0.1
§ Show GPL License text on Camera
Information Page.
§ The Log should contain time and
identifier of the requester like IP or Name of the PC.
§ Enable the user to use Special
character -_*!
§ Adjusted Button position in IRIS
Size Setting.
§ Upgrade Viewer to latest version
§ New way to upload HTTPS certificate
§ Disabled Bonjour service by default.
Bugfixes
§ Safari browser, h.264, show green
image issue
§ SSL Certificate Expiry bug
§ PTZ cruise bug
§ Move S3Lm camera can be rotated
clockwise via NVR at 2688x1512 WDR Mode
top
Software Release mb20220106RS for MOBOTIX MOVE Camera
Models Mx-SD1A-230-LL, Mx-SD1A-330, Mx-SD1A-340-IR
Creation Date: 2022-01-06
Publishing Date: 2022-03-10
Enhancements
and Improvements
§ Added Non-IE browser h.264
""Center Mode"" feature. (Click the live stream and camera
will pan/tilt moving to the clicking point as center.)
§ Added Tab name of browser change
with the host name.
§ Edited Network Page to show
""MJPEG over HTTP port""
§ Upgraded NTP Server to latest
version.
§ Implemented “Save succeeded” after
pressing Save Button on webGUI.
§ Default TTPS enable (TLS1.2)
§ Edited the Periodical Event time
interval from 60 seconds to 10 seconds.
§ Config file now can be uploaded with
different file names
Bugfixes
§ Fixed SD230 and SD330 Alarm Out not
working issue.
§ Fixed Non-IE browser cannot pan/tilt
while setting to h.264.
§ Fixed MJPEG display technics on
none-IE browser under unstable network (remote connection).
top
Software Release mb20210813RS for MOBOTIX MOVE Camera
Models Mx-SD1A-330, Mx-SD1A-340-IR
Creation Date: 2020-08-13
Publishing Date: 2021-09-15
Enhancements
and Improvements
- Improvement
of the PTZ focus while moving from preset to preset
- Added
US date format MM/DD/YYYY
- Increase of
fastest shutter speed
- Added APB VPN
- Periodical
Event with trigger action "HTTP
Notification"
- Added adjustable
recording file size
Bugfixes
- MOVE
NVR integration issue with editing max exposure gain
top
Software Release mb20201123RS for MOBOTIX MOVE Camera
Models SD-330, SD-340-IR
Creation Date: 2020-11-23
Publishing Date: 2021-01-06
Enhancements
and Improvements
- New
password policy: Password must be between 6 and 16 characters long, have
at least one digit and must not contain any special characters. The camera
will show a corresponding warning if the password does not follow these
rules.
- Added
checkbox to enable/disable TLS 1.0.
Bugfixes
- Fixed
shifting mask issue when using PTZ.
- Fixed
typo "MJPEG" on main page.
- Fixed Genetec certification issue.
top
Software Release mb20200318RS for MOBOTIX MOVE Camera
Models SD-330, SD-340-IR
Creation Date: 2020-03-18
Publishing Date: 2020-08-04
Bugfixes
- User
Accounts are restricted to I/O Access.
- Stream Unicast + Multicast.
top
Software Release mb20200131RS for MOBOTIX MOVE Camera
Models SD-330, SD-340-IR
Creation Date: 2020-01-31
Publishing Date: 2020-02-14
Enhancements
and Improvements
- Added
video codec H.265 to reduce bit rates as well as throughput and
storage requirements.
- Added
support of ONVIF Profile T (in addition to Profile S/G).
- Added
support for SMBv2 (SMBv1 before).
- It
is now possible to define several administrators with individual access
credentials for a camera.
- Added
method for importing a full camera configuration file with selectable
settings.
Bugfixes
- Corrected
faulty behavior when importing configuration files in browsers other than
Internet Explorer.
- Corrected
faulty handling of BOOTPROTO parameter when importing configuration files.
top
Software Release mb20191031RS for MOBOTIX MOVE Camera
Models SD-330, SD-340-IR
Creation Date: 2019-10-31
Publishing Date: 2019-12-18
Enhancements
and Improvements
- Web
interface allows changing the MTU.
- Web
interface now shows the MAC address.
Bugfixes
- Numerous
improvements regarding security and stability.
top
Software Release mb20190711RS for MOBOTIX MOVE Camera
Models SD-330, SD-340-IR
Creation Date: 2019-07-11
Publishing Date: 2019-08-06
Enhancements
and Improvements
Full
ONVIF S Conformity Attained
With this release, the
cameras are fully compliant to ONVIF S according to the ONVIF Test Tool v18.12.
Other Enhancements and Improvements
- Bonjour
is now activated by default.
- New
Camera Information dialog added.
- Default
setting for image resolution adjusted.
Bugfixes
- Storage
of periodic events on SD card did not work reliably.
- Fixed
typo in naming of ONVIF Scope Record.
- Fixed
error in Genetec multi streaming protocol.
- Fixed
an error when accessing a network share with credentials that contained
special characters.
- Fixed
an error in the German user interface.
top
Software Release mb20181025RS for MOBOTIX MOVE Camera
Models SD-330, SD-340-IR
Creation Date: 2018-10-25
Publishing Date: 2018-11-02
Enhancements
and Improvements
Integration
in MxManagementCenter 2.0 and MOBOTIX NAS
Starting with this release,
MOBOTIX MOVE cameras can be integrated in MxMC 2.0
and MOBOTIX NAS devices. The integration uses ONVIF Profile S for this purpose.
Bonjour
Search
Starting with this release,
you can find MOBOTIX MOVE cameras on the network using the Bonjour service.
Open the System > Network > Bonjour dialog to find the
settings.
ONVIF
Profile S
This release contains
improvements to the ONVIF Profile S to enhance the integration in MxMC 2.0 and MOBOTIX NAS devices.
Other Improvements
- Streaming
settings
Stream 3 set to M-JPEG, 1920x1080.
- API
commands
Adjusted API command for getting user rights.
- ONVIF
Scope names
ONVIF host name adjusted for integration in MxMC 2.0.
Bugfixes
- Lost
ONVIF Scope Records after updating
After updating the firmware, scope records written before the update had
disappeared.
- Wrong
scheme when using SSL
Requests to the camera via HTTPS had not been answered using HTTPS.
Copyright © 1999 – 2021, MOBOTIX AG, Germany, support@mobotix.com