Release Notes for MOBOTIX MOVE Mx-S-NVR1A-64-POE24
Model
Document Information
|
Publisher:
|
MOBOTIX AG
|
|
Author:
|
Thomas
Dieregsweiler
|
|
Date:
|
2022-12-08
|
|
Document:
|
release-notes_mb20221101NVR64_en_v1-1.html
|
|
Confidentiality:
|
public
|
Contents
These Release Notes
contain a technical description of the most important changes in the software
for the MOBOTIX MOVE NVR 64 channel device.
Overview of Software Releases
- Please download the stable customer releases of the software from www.mobotix.com in the Support >
Download Center > Software Downloads section.
- After
downloading the software, please extract both files to the same folder.
The device needs both files at the same location in
order to verify the software before starting the installation.
- Please
send an email to support@mobotix.com
for feedback.
Important Notice:
- Due
to improved MOVE IP cameras forced Password change security policy, for
new installed cameras (“out of the box”), it is mandatory to change Camera
Standard Password on camera using direct camera Web-access via Browser , to allow integration and access via NVR.
Standard Password on camera will not be accepted and supported by the NVR
top
Software Release mb20221101NVR64 for MOBOTIX MOVE Mx-S-NVR1A-64-POE24
Creation Date: 2022-11-01
Publishing Date: 2022-12-08
New Features
·
Add event push message service (NVR/Remote)
VA event is supported now, and there’s a switch
to decide if you want to send the event or not
·
Add white / black list
service for Face Recognition & LPR
MOBOTIX MOVE camera can support white/black list in FR & LPR
·
Add bypass camera Face Recognition & LPR Service
Bypass mode can support MOBOTIX MOVE camera now
·
Modify the event log search service
In log pages, user can choose the filter to
search the event
·
Support Face Recognition / ALPR Database Edit service
(NVR/Remote)
User now can do the edit to the database for
Face Recognition and LPR
·
MOBOTIX PTZ keyboard integration
·
Support Video analytics setting from remote
·
Support edge recording from remote
·
Setup> System> Event management, for video
analytics, support In list/ white list/ black list/
Not in list
·
MOBOTIX MOVE ALPR camera integration
Improvements
· Support ONVIF PTZ Service
The FW with PTZ function pass ONVIF support
testing.
·
Disable google drive service (Google policy)
Bugfixes
·
Fix ONVIF Pelco Camera
Decode Problem (Pelco Camera IBP231-1ER)
top
Software Release mb20220822NVR64 for MOBOTIX MOVE Mx-S-NVR1A-64-POE24
Creation Date: 2022-08-22
Publishing Date: 2022-08-31
New Features
- Read Warning when using Motion Detection
on NVR -
Event reminder will be applied on all the channels, for all the event
types - When there is an event happens since the last time users
acknowledges event, there will be a reminder icon on the top right of the
channel. - If users hover over the icon, there will be text displaying the
latest event type and event time. If user wants to check more events that
have ever happened, he should go to Playback/ Export or Log page to check
further information of that channel. - If users click on the icon, it is
equivalent to acknowledge all the events on that channel. The icon would
disappear after the click. -The behavior for local NVR and remote won't be
synchronized. For example, there is a new user logged in from web remote,
the event reminder would only count the event since his login. User from
local won't be affected by other remote users.
- Move Camera Config upload from remote/
local,
users could decide whether they would like to apply network setting or
not. Be sure to insert a USB flash first.
- Note1 : This feature requires camera FW
(mb20220815 or later) to support.
- Note2: Camera original FW version, model must be exactly
the same to apply the config file
- Note3: Network setting doesn’t include IP address, but other options
like webserver port, RTSP port, etc.
- MOVE Camera Certification file upload from
remote/ local
Note: This
feature requires camera FW (mb20220815 or later) to support.
- On FW version page, should display the zip
file name so the FW version match the release note
- Option to send a snapshot via E-mail
Note: Ensure that under Setup>System >Event management, snapshot is
selected
- Sending emails only outside of business
times now supported
- Support open VPN (Local NVR only)
Note: Ensure that either LAN/ WAN port needs to be able to reach the VPN
server
- Under Add Device, the IP cam and ONVIF
represents the username / password that will be applied based on the filter.
IP Cam changed to MOBOTIX MOVE
- Support web.de mail
Improvements
- Setup > storage> local storage,
"inactivate" changed to "deactivate"
Bugfixes
- Move NVR8/16 does not operate sufficient
with MOBOTIX IoT P7 camera range, bad frame rate and visual artifacts
fixed
- Time gap issue fixed: Live view showed a
time difference between the NVR and Camera as 10 seconds but there was a 7 minute difference in the playback time display
top
Software Release mb20220511NVR64 for
MOBOTIX MOVE Mx-S-NVR1A-64-POE24
Creation Date: 2022-05-11
Publishing Date: 2022-05-20
New Features
- Support Mobotix digital signature.
- Updated Kernel data code.
- PASS ONVIF S/T/G
Device (server) test.
- Make failover/
primary NVR system could be inter-upgradable.
- This feature is
completed by putting chg_logo.chk also in the .zip file.
- Support password
change from remote.
- Upgrade camera FW
from remote.
- Could add Wisenet camera into Move NVR.
- Under Setup>
Network> Ethernet, there is new feature "Route" to arrange
routing table priority.
- Note: The port
needs to connect to DHCP server to see the it is
shown on the list.
- Under Record
> Record Schedule, there are two recording templates.
- Record
- No Record
- Note: This is
new feature for passing ONVIF test tool
- Display
“About” on remote web.
Improvements
·
-
Bugfixes
·
Support FW upgrade naming rule:[ “mb” + release
date +” NVR “+ number of channels .zip ] for 64CH NVR.
·
After FW upgrade, the FW version won't be upgraded after refresh. Need
to reboot NVR to refresh FW version.
·
Couldn’t set RTSL URL under MAC + Chrome.
·
Remove "Stream Motion Setting" under LBR.
o Note: "Stream Motion
Setting” is no longer existing, but UI hasn’t removed it.
·
Could do back-end dewarp on playback for fisheye camera .
·
See two login window under MAC + Firefox.
top
Creation Date: 2022-01-27
Publishing Date: 2022-02-25
New Features
- MOBOTIX IoT camera bidirectional audio supported
(P6/P7)
·
Central IP camera Password change for a batch of
cameras via local NVR
·
Support
adding IP camera device by Pull live stream from IP-Camera RTSP
URL
·
Backend NVR De-warping for MOVE Hemispheric Camera in
Playback mode
Note: Feature limited to 64Ch NVR only (not available on 8/16 Ch NVR)
·
Change password length to be 8-16.
The supported characters are A-Z, a-z, 0-9, !#$%&'-.@^_~
Improvements
·
UI improvement - when parameter is saved, there will be "Save
succeeded" text shown on the bottom to indicate changed parameters saved.
·
UI improvement - under "Add device", user has
to unlock the camera lock symbol first to do any parameter change. After
the parameters are changed and camera locked, there will be pop up window "Save
succeeded"
·
UI Improvement - under guest mode, users don't need to logout first to
login as admin
·
In
“About-Window” additional SW Info available: Display of FW version,
release date, 3rd Party SW-licenses (GPL, GNU…)
Bugfixes
·
UI adjustment - Under live view, adjust character length to avoid text
being blocked when using German
·
UI adjustment – Setup > Display > Video display mode shall show
English
Setup > PoE / Ip-Port Management >Advanced “Save” corrected to English
Copyright
© 1999 – 2022, MOBOTIX AG, Germany, support@mobotix.com