MOBOTIX

Release Notes for MOBOTIX Certified App Software

Document Information

Publisher: MOBOTIX AG
Author: Bernd Wilhelm
Date: 2022-03-02
Document: Apps_2022-02-16_release-notes_en_V1.html
Confidentiality: public

Contents

These Release Notes contain a technical description of the most important changes in the Certified Apps for the MOBOTIX 7 camera line.

Software Releases—Overview

App Package Version Creation Date Publishing Date
App Package 2022-02-16
 2022-02-16 2022-03-02
App Package 2021-08-20 2021-08-20 2021-08-31
App Package 2021-03-17 2021-03-17 2021-03-31
App Package 2021-02-24 2021-02-24 2021-02-25

Notes:

top

Certified Apps 2022-02-16 − for M7 Camera Models M73, S74, D71

Creation Date: 2022-02-16

Publishing Date: 2022-03-02

Important notes on installation


Package content

The Apps that have changed from the last App package 2021-08-20  are specially marked. For more details on these changes, see the following sections.

Improved and additional Certified Apps

Note

All A.I. Tech apps had the system-internal version number 3.0.5. Due to a spelling error, however, these apps were displayed with a version 3.5 instead of 3.0.5. This has now been corrected for all updated apps, i.e. all except AIFirePlus, and the version number has first been increased to 3.0.6  and now to  3.0.7.

This release has corrected the following issues when using A.I.Tech apps.

Improved A.I.Tech apps

With this release, most of A.I.Tech's apps have been replaced by improved versions.

FF Group LPR Apps

FFLPRME V1.4.1 (*new*)

With this new App, license plates from countries of the Middle East can be recognized. It offers the following functions:

As with the other Apps, the connection to the event logic and alarm functions of the camera is done using messages from the MxMessage System. In addition, the detection results can be viewed and evaluated using Smart Data Sources in the MxManagementCenter (requires MxMC V2.6 or higher).

Irisity Apps

Irisity IRIS AI Analytics V1.0 (*new*)

This new App is used to detect burglary attempts. This is characterized by the following functions and properties, among others:

As with the other apps, the connection to the event logic and alarm functions of the camera is done using messages from the MxMessage system. In addition, the detection results can be displayed and evaluated using Smart Data Sources in the MxManagementCenter (MxMC V2.6 or higher).

Vaxtor Apps

With this release, all existing Vaxtor Apps have been replaced by improved versions and two new apps have been added.

Vaxtor LPR V1.3.6  (*updated*)

Vaxtor LPR Dual Sensor V1.3.6 (*new*)

This new App from Vaxtor for global license plate recognition offers the following functions, among others:

As with the other apps, the connection to the event logic and alarm functions of the camera is done using messages fromthe MxMessage system. In addition, the detection results can be displayed and evaluated using Smart Data Sources in the MxManagementCenter (MxMC V2.6 or higher).

Vaxtor Aircraft Identification Number V1.3.6 (*new*)

This is a new app for identifying aircrafts using ICAO and FAA identification numbers.

As with the other apps, the connection to the event logic and alarm functions of the camera is done using messages fromthe MxMessage system. In addition, the detection results can be displayed and evaluated using Smart Data Sources in the MxManagementCenter (MxMC V2.6 or higher).

Known Limitations

top

Certified Apps 2021-08-20 − for M7 Camera Models M73, S74

Creation Date: 2021-08-20

Publishing Date: 2021-08-31

Important notes on installation


Package content

The Apps that have changed from the last App package 2021-03-17  are specially marked. For more details on these changes, see the following sections.

Improved and additional Certified Apps

Note

All A.I. Tech apps so far had the system-internal version number 3.0.5. Due to a spelling error, however, these apps were displayed with a version 3.5 instead of 3.0.5. This has now been corrected for all updated apps, i.e. for all but AIFirePlus, and the version number has been increased to 3.0.6.

This release has corrected the following issues when using A.I.Tech apps.

Improved A.I.Tech apps

Display and configuration in the dashboard

When configuring the A.I. Tech Apps in the dashboard, only half of the camera live image was displayed.

AISpill App

After activating the AISpill App in the Setup > Certified App Control > Certified App Settings dialog, the AISpill link to start the configuration sometimes did not exist in the dashboard. In addition, using the App could freeze the camera live image..

FF Group LPR Apps

FFLPR V1.3.3 (updated and extended)

In addition to internal improvements, this version of the App contains the following enhancements to its settings in the Setup > Certified App Control > Certified App Settings > FFLPR Settings dialog:

FFLPR MMC V1.3.3 (*new*)

With this new app, in addition to the license plate, the make, model, color and class of vehicles can also be recognized. It offers the following functions:

As with the other Apps, the connection to the event logic and alarm functions of the camera is done using messages from the MxMessage System. In addition, the detection results can be viewed and evaluated using Smart Data Sources in the MxManagementCenter (requires MxMC version higher than 2.5.2).

MOBOTIX Analytics

Analytics with object recognition

This extension of the MOBOTIX Analytics App can also be activated after installing the MX_preinstalled_apps_2021-05-28.app package.  All you have to do is, change the Camera Mode option in the Admin > Hardware Configuration > Camera Mode dialog from Streaming to AI and then restart the camera. Then the option Use AI Component is available to activate Object Recognition based on AI/deep learning techniques within the settings of MOBOTIX Analytics. In addition, the App Object Recognition Settings is also available for more precise configuration of AI-based object recognition.

Note

As before, when operating the camera in AI mode, the camera is limited to the use of one image sensor (on port M1) and the WDR (Wide Dynamic Range) function is then not available.

Analytics Object Recognition and Display Enhancements

When displaying and tracking detected objects (e.g. people, vehicles,... ), it could happen that the display has changed to other, sometimes also to non-moving, objects. This behavior has been significantly improved.

Visage Technologies Facial Recognition V1.2.1 (updated)

This release includes internal improvements to the app's detection and runtime behavior.

Vaxtor Apps - LPR V1.3.1, ADR V1.3.1 , ALPR MMC V1.3.1, Vaxtor Containers V1.3.1

All existing Vaxtor Apps have been revised and further improved.

Vaxtor UIC V1.3.1 (*new*)

This is a new App for the identification of freight and passenger coaches using the UIC wagon number for stationary or slowly (< 10 km/h) moving wagons. The App can identify the following wagon characteristics::

As with the other Apps, the connection to the event logic and alarm functions of the camera is done using messages from the MxMessage System. In addition, the detection results can be viewed and evaluated using Smart Data Sources in the MxManagementCenter (requires MxMC version higher than 2.5.2).

Known Limitations

top

Certified Apps 2021-03-17 − for M7 Camera Models M73, S74

Creation Date: 2021-03-17

Publishing Date: 2021-03-31

Important notes on installation


Package content

The package contains the following App versions.

Das Paket enthält die folgenden App-Versionen.

Improved and additional Certified Apps

This release has improved and partially expanded existing Certified Apps and added new ones.

Vaxtor ALPR MMC LPR V1.2.1(*new*)

With this new App, the brand, model, color and class of vehicles can be recognized in addition to the license plate. It offers the following functions:
As with the other Apps, the connection to the event logic and alarm functions of the camera is done using messages from the MxMessage System. In addition, the detection results can be viewed and evaluated using Smart Data Sources in the MxManagementCenter (MxMC, version 2.4.4 onwards).

Vaxtor Containers V1.2.1 (updated)

With this new version of the App for the detection of transport container codes according to ISO 6346, the analysis can now also be done on a live camera dual image.

Vaxtor LPR V1.1.2 und ADR V1.1.2 (updated)

The new versions of these two Apps correct problems when using multiple detection ranges.

Visage Technologies Facial Recognition V1.2 (already contained in App-Package 2021-02-24)

Firmware 7.1.3.19 now also supports this version of the app, in which some bugs have been fixed and performance improved. In addition, facial recognition now works much more robustly in demanding conditions such as large scaling variability, difficult lighting, certain poses and covers such as beards, glasses and  masks. In firmware version 7.1.3.15, this App version could not be used yet.

Known Limitations

top

Certified Apps 2021-02-24 − for M7 Camera Models M73, S74

Creation Date: 2021-02-24

Publishing Date: 2021-02-25

Important notes on installation


Package content

The package contains the following App versions.

Das Paket enthält die folgenden App-Versionen.

Details about the new and updated apps can be found below.

Improved and additional Certified Apps

FF Group License Plate Recognition AM (FFLPRAM) V1.0 (*new*)

This new app is used to detect license plates in the UNITED States. The following functions are supported:

As with the other apps, the connection to the event logic and alarm functions of the camera is done using messages from the MxMessage System. In addition, the detection results can be viewed and evaluated using Smart Data Sources in the MxManagementCenter (MxMC, version 2.4.3 onwards).

Vaxtor Container Code Recognition (Vaxtor Containers) V1.2.0 (*new*)

With this new app, codes of transport containers can be recognized according to the international standard ISO 6346. The following characteristics are identified:

This app also connects to the camera's event logic and alarm functions using messages from the MxMessage System. The detection results can also be viewed and evaluated using Smart Data Sources in the MxManagementCenter (MxMC, version 2.4.3) onwards.

Visage Technologies Facial Recognition V1.2 (updated and extended)

In this release, some bugs have been fixed and the performance has been improved. In addition,  facial recognition now  works much more robustly in demanding conditions such as large scaling variability, difficult lighting, certain poses and covers such as beards, glasses and masks.

Known Limitations

Copyright © 2022, MOBOTIX AG, Germany, support@mobotix.com