Release Notes for MOBOTIX MOVE Camera Models SD-330, SD-340-IR

Document Information

Contents

These Release Notes contain a technical description of the most important changes in the software for the MOBOTIX MOVE network cameras.

Overview of the Software Releases

Notes:

• Please download the stable customer releases of the software from www.mobotix.com in the Support > Download Center > Software Downloads section.
• Please send an email to support@mobotix.com for feedback.

top

Software Release mb20201123RS for MOBOTIX MOVE Camera Models SD-330, SD-340-IR

Creation Date: 2020-11-23

Publishing Date: 2021-01-06

Enhancements and Improvements

• New password policy: Password must be between 6 and 16 characters long, have at least one digit and must not contain any special characters. The camera will show a corresponding warning if the password does not follow these rules.
• Added checkbox to enable/disable TLS 1.0.

Bugfixes

• Fixed shifting mask issue when using PTZ.
• Fixed typo "MJPEG" on main page.
• Fixed Genetec certification issue.

top

Software Release mb20200318RS for MOBOTIX MOVE Camera Models SD-330, SD-340-IR

Creation Date: 2020-03-18

Publishing Date: 2020-08-04

Bugfixes

• User Accounts are restricted to I/O Access.
• Stream Unicast + Multicast.

top

Software Release mb20200131RS for MOBOTIX MOVE Camera Models SD-330, SD-340-IR

Creation Date: 2020-01-31

Publishing Date: 2020-02-14

Enhancements and Improvements

• Added video codec H.265 to reduce bit rates as well as throughput and storage requirements.
• Added support of ONVIF Profile T (in addition to Profile S/G).
• Added support for SMBv2 (SMBv1 before).
• It is now possible to define several administrators with individual access credentials for a camera.
• Added method for importing a full camera configuration file with selectable settings.

Bugfixes

• Corrected faulty behavior when importing configuration files in browsers other than Internet Explorer.
• Corrected faulty handling of BOOTPROTO parameter when importing configuration files.

top

Software Release mb20191031RS for MOBOTIX MOVE Camera Models SD-330, SD-340-IR

Creation Date: 2019-10-31

Publishing Date: 2019-12-18

Enhancements and Improvements

• Web interface allows changing the MTU.
• Web interface now shows the MAC address.

Bugfixes

• Numerous improvements regarding security and stability.

top

Software Release mb20190711RS for MOBOTIX MOVE Camera Models SD-330, SD-340-IR

Creation Date: 2019-07-11

Publishing Date: 2019-08-06

Enhancements and Improvements

Full ONVIF S Conformity Attained

With this release, the cameras are fully compliant to ONVIF S according to the ONVIF Test Tool v18.12.

Other Enhancements and Improvements

• Bonjour is now activated by default.
• New Camera Information dialog added.
• Default setting for image resolution adjusted.

Bugfixes

• Storage of periodic events on SD card did not work reliably.
• Fixed typo in naming of ONVIF Scope Record.
• Fixed error in Genetec multi streaming protocol.
• Fixed an error when accessing a network share with credentials that contained special characters.
• Fixed an error in the German user interface.

top

Software Release mb20181025RS for MOBOTIX MOVE Camera Models SD-330, SD-340-IR

Creation Date: 2018-10-25

Publishing Date: 2018-11-02

Enhancements and Improvements

Integration in MxManagementCenter 2.0 and MOBOTIX NAS

Starting with this release, MOBOTIX MOVE cameras can be integrated in MxMC 2.0 and MOBOTIX NAS devices. The integration uses ONVIF Profile S for this purpose.

Bonjour Search

Starting with this release, you can find MOBOTIX MOVE cameras on the network using the Bonjour service. Open the System > Network > Bonjour dialog to find the settings.

ONVIF Profile S

This release contains improvements to the ONVIF Profile S to enhance the integration in MxMC 2.0 and MOBOTIX NAS devices.

Other Improvements

• Streaming settings
  Stream 3 set to M-JPEG, 1920x1080.
• API commands
  Adjusted API command for getting user rights.
• ONVIF Scope names
  ONVIF host name adjusted for integration in MxMC 2.0.

Bugfixes

• Lost ONVIF Scope Records after updating
  After updating the firmware, scope records written before the update had disappeared.
• Wrong scheme when using SSL
  Requests to the camera via HTTPS had not been answered using HTTPS.